Am Samstag, 9. April 2005 08.27 schrieb Peter Greis: > Hi All, > > PAL country with the "u" driver - my 350 works, now > the 150MCE doesn't even give me data with "cat > /dev/video1 > foo.mpg" (bfore it was blocky). I am > fast approaching the point where I am going to chuck > the 150 into the bin and get another 250... Am I being > too hasty ? > > -P > > Peter Greis > Zurich Switzerland > +++ Be careful replying... the real address is "peter_greis[at]yahoo[dot]com" > +++ > > > > __________________________________ > Do you Yahoo!? > Yahoo! Small Business - Try our new resources site! > http://smallbusiness.yahoo.com/resources/ > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > ivtv-devel mailing list > ivtv-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > >
Please tell me when and where you will get rid of it - I'll take it - I know currently the driver doesn't work with every 150/500 but I think I will be solved in short time. What I can tell you is, that I already had good pictures with my PVR-150 (TAPE LG001D Tuner) but this was with a older driver version - I do not know which driver version it was, but maybe It was also that at that time I had my PVR-150 in a system whit a bttv Card and not a "old" PVR-350. So I think the 150 Problems will be solved ..... ;-) I've at the moment also only static on my 150 with the green and pink block's at the bottom of the screen... Nothing usefull to watch but at least I get data from my 150 .... The only Error I get when loading the ivtv driver is after the END INIT IVTV marker : cx25840: decoder set size: ignoring bad config request Hsrc=720 Vsrc=487 width=720 height=576 I did not set any parameter for the CX loading so I do not know from where it takes this config request. This also is repeated every time the tuner is accessed with a cat /dev/video1 >bla.mpg (I'm from Switzerland - PAL B/G country) Regards Marcel I think, that depending on the feed back of the 150 users and the spare time of Chris we will get to a stable 150 Configuration in short time. Regards Marcel PS: Is it normal that the 150 is detected as having 2 tuner's with the ivtvctl tool - and also in the setup of mythtv? ivtvctl -Input /dev/video1 -a : ========================================= ioctl: IVTV_IOC_G_CODEC Codec parameters aspect : 2 audio : 0x00e9 bframes : 3 bitrate_mode: 0 bitrate : 8000000 bitrate_peak: 9600000 dnr_mode : 0 dnr_spatial : 0 dnr_temporal: 0 dnr_type : 0 framerate : 0 framespergop: 12 gop_closure : 1 pulldown : 0 stream_type : 0 ioctl: VIDIOC_G_FMT Type : Video Capture Width : 720 Height : 576 ioctl: VIDIOC_QUERYCAP Driver name : ivtv Card type : WinTV PVR 150 Bus info : 1 Driver version: 770 Capabilities : 0x01070011 ioctl: VIDIOC_ENUMINPUT Input : 0 Name : S-Video 0 Type : 0x00000002 Audioset: 0x00000003 Tuner : 0x00000000 Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) Status : 0 Input : 1 Name : S-Video 1 Type : 0x00000002 Audioset: 0x00000003 Tuner : 0x00000000 Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) Status : 0 Input : 2 Name : Composite 0 Type : 0x00000002 Audioset: 0x00000003 Tuner : 0x00000000 Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) Status : 0 Input : 3 Name : Composite 1 Type : 0x00000002 Audioset: 0x00000003 Tuner : 0x00000000 Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) Status : 0 Input : 4 Name : Composite 2 Type : 0x00000002 Audioset: 0x00000003 Tuner : 0x00000000 Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) Status : 0 Input : 5 Name : Composite 3 Type : 0x00000002 Audioset: 0x00000003 Tuner : 0x00000000 Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) Status : 0 Input : 6 Name : Tuner 0 Type : 0x00000001 Audioset: 0x00000003 Tuner : 0x00000000 Standard: 0x00000000000000FF ( PAL ) Status : 0 Input : 7 Name : Tuner 1 Type : 0x00000001 Audioset: 0x00000003 Tuner : 0x00000000 Standard: 0x00000000000000FF ( PAL ) Status : 0 ioctl: VIDIOC_G_INPUT Input = 6 ioctl: VIDIOC_ENUMOUTPUT ioctl: VIDIOC_G_OUTPUT ioctl: VIDIOC_ENUMAUDIO Input : 0 Name : Tuner Audio In Input : 1 Name : Audio Line In ioctl: VIDIOC_G_AUDIO Input = 0: Tuner Audio In ioctl: VIDIOC_G_FREQUENCY Frequency = 4392 ioctl: VIDIOC_ENUMSTD index : 0 ID : 0x0000000000003000 Name : NTSC Frame period: 1001/30000 Frame lines : 525 index : 1 ID : 0x00000000000000FF Name : PAL Frame period: 1/25 Frame lines : 625 index : 2 ID : 0x00000000007F0000 Name : SECAM Frame period: 1/25 Frame lines : 625 ioctl: VIDIOC_G_STD Standard = 0x000000ff ioctl: VIDIOC_QUERYCTRL Brightness = -1010688384 Contrast = -516213809 Saturation = -1010688384 Hue = -2146937321 Volume = 65535 Mute = 0 ========================================= ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
