rpm -qa ivtv ivtv-0.3.2q-78.rhfc3.at
The tveeprom does not recognise the card as a PVR-250 thinks it is an "Unknown Card" even though I had been going strong on the 0.1.10 version for 6+ months. Here is dmesg with the new driver:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.2 (q) loading
ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device: 0070/0009
ivtv: Defaulting to WinTV PVR 150 card
ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what kind of
ivtv: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv
ivtv: Prefix your subject line with [UNKNOWN CARD].
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:05:04.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: XXX PCI device: 0x2560 vendor: 0x8086
tveeprom: Hauppauge: model = 32032, rev = B326, serial# = 7193410
tveeprom: tuner = Temic 4036FY5 (idx = 26, type = 8)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 8, Tuner formats 0x00001000, Radio: yes, Model 0x00893496, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: i2c attach [client=(tuner unset),ok]
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1
ivtv: Allocate DMA stream 1
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total
ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Allocate stream 4
ivtv: Setting Tuner 8
tuner 0-0061: type set to 8 (Temic NTSC (4036 FY5))
ivtv: i2c client addr: 0x44 not found!
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x44 not found!
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
here is what I get if I try to access the video device:
ivtv: i2c client addr: 0x44 not found! ivtv: i2c client addr: 0x44 not found! ivtv: i2c client addr: 0x44 not found! ivtv: i2c client addr: 0x44 not found!
----Original Message Follows---- From: "Charles Waddell" RE: [ivtv-devel] [UNKNOWN CARD] after upgrade to 0.2.0
Reading back through past entries to the ivtv-devel list, I found 2 other people with the same problem. i.e. formerly identified PVR-250's that after the update found that their cards were no longer being recognised, they both had different types. Mine is recognised as a tuner type=8 which is correct, but it says that it is "unknown". I would like to add that I added:
alias tveeprom tveeprom-ivtv
to my modprobe.conf thinking that the ivtv version would be able to correctly identify the card, but it was to no avail. Any help is greatly appreciated.
Thanks again, C Daniel
----Original Message Follows---- From: "Charles Waddell" Subject: [ivtv-devel] [UNKNOWN CARD] after upgrade to 0.2.0
Everything has been fine with ivtv for the last 6 months or so until I updated to the newer version of ivtv. (Recommended by Jarod).
# rpm -qa ivtv ivtv-0.2.0-66_rc3i.rhfc3.at
now I get an unknown card type. My card is a PVR-250 although ivtv defaults to a PVR-150. Here is dmesg between the IVTV sections:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3i) loading
ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device: 0070/0009
ivtv: Defaulting to WinTV PVR 150 card
ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what kind of
ivtv: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv
ivtv: Prefix your subject line with [UNKNOWN CARD].
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:05:04.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: XXX PCI device: 0x2560 vendor: 0x8086
ivtv: i2c attach [client=tveeprom,ok]
ivtv: i2c attach [client=(tuner unset),ok]
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tveeprom: Hauppauge: model = 32032, rev = B326, serial# = 7193410
tveeprom: tuner = Temic 4036FY5 (idx = 26, type = 8)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: Tuner Type 8, Tuner formats 0x00001000, Radio: yes, Model 0x00893496, Revision 0xd0b1cf04
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 8
tuner 0-0061: type set to 8 (Temic NTSC (4036 FY5))
ivtv: i2c client addr: 0x44 not found!
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x44 not found!
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
The video devices are there but if I try to access them I get the following from dmesg:
ivtv: i2c client addr: 0x44 not found! ivtv: i2c client addr: 0x44 not found! ivtv: i2c client addr: 0x44 not found! ivtv: ENC: User stopped capture.
Should I roll back to a previous version? or does anyone have any suggestions.
Thanks in advance, C Daniel Waddell
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
