Did both multiple times. I think I might have a power supply problem and that could be causing the hangs. The wattage I need for all the pieces is in excess of the power supply so I think that may be the culprit (ended up having to use a video card vs the onboard due to driver issues). I have ordered a new power supply and will try that out.
Also tried the removing and reloading the driver. Justin On Apr 10, 2005 11:24 AM, hjk <[EMAIL PROTECTED]> wrote: > justin coleman wrote: > > >I tried the 0.3.2q driver (found a pre compile on atrpms) and got kfer > >errors. I then tried 0.3.2u which I pulled off of the ivtv site. I > >went through all of the README's and everything seemed to go ok, but > >when I look at the log it still says 0.3.2q. That aside I still have > >the same problem that whenever I try to cat /dev/video0 or /dev/video1 > >the system locks up. I do have a Via motherboard, but it is the KM400 > >and does not appear (according to posts on the web) to have the > >problem of previous boards. Here is my log. > > > >Thanks again > >Justin > > > >Apr 10 10:30:53 localhost kernel: ivtv: ==================== START > >INIT IVTV ==================== > >Apr 10 10:30:53 localhost kernel: ivtv: version 0.3.2 (q) loading > >Apr 10 10:30:53 localhost kernel: ivtv: Linux version: > >2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4 > >Apr 10 10:30:53 localhost kernel: ivtv: In case of problems please > >include the debug info > >Apr 10 10:30:53 localhost kernel: ivtv: between the START INIT IVTV > >and END INITIVTV lines when > >Apr 10 10:30:53 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. > >Apr 10 10:30:53 localhost kernel: ivtv: Autodetected WinTV PVR 150 card > >Apr 10 10:30:53 localhost kernel: ivtv: Found an iTVC16 based chip > >Apr 10 10:30:53 localhost kernel: ACPI: PCI interrupt 0000:02:08.0[A] > >-> GSI 11 (level, low) -> IRQ 11 > >Apr 10 10:30:53 localhost kernel: ivtv: Unreasonably low latency > >timer, setting to 64 (was 32) > >Apr 10 10:30:53 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor: 0x1106 > >Apr 10 10:30:53 localhost kernel: tveeprom: Hauppauge: model = 23552, > >rev = D492, serial# = 7894440 > >Apr 10 10:30:53 localhost kernel: tveeprom: tuner = Philips FQ1236A > >MK4 (idx = 92, type = 57) > >Apr 10 10:30:53 localhost kernel: tveeprom: tuner fmt = NTSC(M) > >(eeprom = 0x08, v4l2 = 0x00001000) > >Apr 10 10:30:54 localhost kernel: tveeprom: audio_processor = MSP3410D > >(type = 5) > >Apr 10 10:30:54 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] > >Apr 10 10:30:56 localhost kernel: ivtv: Tuner Type 57, Tuner formats > >0x00001000,Radio: yes, Model 0x00914652, Revision 0x00000000 > >Apr 10 10:30:57 localhost kernel: ivtv: NTSC tuner detected > >Apr 10 10:30:58 localhost kernel: ivtv: Radio detected > >Apr 10 10:30:58 localhost kernel: tuner: Ignoring new-style parameters > >in presence of obsolete ones > >Apr 10 10:30:58 localhost kernel: tuner: chip found at addr 0xc2 > >i2c-bus ivtv i2c driver #0 > >Apr 10 10:30:58 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] > >Apr 10 10:30:58 localhost kernel: cx25840: FW image > >'/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > >Apr 10 10:30:58 localhost kernel: cx25840: FW image md5 digest: > >3a4803384f749d644ee1f1ca9dcb12fa > >Apr 10 10:30:58 localhost kernel: cx25840: FW image sha1 digest: > >2b5e6292b7391c980b93d156cf6b34178ce770f6 > >Apr 10 10:30:58 localhost kernel: ivtv: i2c attach [client=cx25840[0],ok] > >Apr 10 10:30:58 localhost kernel: ivtv: i2c attach [client=wm8775[0],ok] > >Apr 10 10:30:59 localhost kernel: ivtv: Encoder revision: 0x02040011 > >Apr 10 10:30:59 localhost kernel: ivtv: Configuring WinTV PVR 150 card > >with 5 streams > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 0 minor 0 > >Apr 10 10:30:59 localhost kernel: ivtv: Create DMA stream 0 using 1024 > >16384 byte buffers 0 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate DMA stream 0 using > >1024 16384 byte buffers 16777216 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 1 minor 32 > >Apr 10 10:30:59 localhost kernel: ivtv: Create DMA stream 1 > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate DMA stream 1 > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 2 minor 224 > >Apr 10 10:30:59 localhost kernel: ivtv: Create stream 2 using 40 52224 > >byte buffers 0 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate stream 2 using 40 > >52224 byte buffers 2097152 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 3 minor 24 > >Apr 10 10:30:59 localhost kernel: ivtv: Create DMA stream 3 using 455 > >4608 byte buffers 0 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate DMA stream 3 using > >455 4608 byte buffers 2097152 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 4 minor 64 > >Apr 10 10:30:59 localhost kernel: ivtv: Create stream 4 > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate stream 4 > >Apr 10 10:31:00 localhost kernel: ivtv: Setting Tuner 57 > >Apr 10 10:31:00 localhost kernel: tuner: type set to 57 (Philips > >FQ1236A MK4) byivtv i2c driver #0 > >Apr 10 10:31:01 localhost kernel: ivtv: Switching standard to NTSC. > >Apr 10 10:31:02 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 > >Apr 10 10:31:02 localhost kernel: ivtv: Autodetected WinTV PVR 150 card > >Apr 10 10:31:03 localhost kernel: ivtv: Found an iTVC16 based chip > >Apr 10 10:31:03 localhost kernel: ivtv: ivtv_enc_thread: pid = 5797, > >itv = 0xe0d0c220 > >Apr 10 10:31:03 localhost kernel: ACPI: PCI interrupt 0000:02:09.0[A] > >-> GSI 10 (level, low) -> IRQ 10 > >Apr 10 10:31:03 localhost kernel: ivtv: Unreasonably low latency > >timer, setting to 64 (was 32) > >Apr 10 10:31:03 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor: 0x1106 > >Apr 10 10:31:03 localhost kernel: tveeprom: Hauppauge: model = 23552, > >rev = D492, serial# = 7894440 > >Apr 10 10:31:03 localhost kernel: tveeprom: tuner = Philips FQ1236A > >MK4 (idx = 92, type = 57) > >Apr 10 10:31:03 localhost kernel: tveeprom: tuner fmt = NTSC(M) > >(eeprom = 0x08, v4l2 = 0x00001000) > >Apr 10 10:31:03 localhost kernel: tveeprom: audio_processor = MSP3410D > >(type = 5) > >Apr 10 10:31:03 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] > >Apr 10 10:31:03 localhost kernel: tuner: chip found at addr 0xc2 > >i2c-bus ivtv i2c driver #1 > >Apr 10 10:31:03 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] > >Apr 10 10:31:04 localhost kernel: cx25840: FW image > >'/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > >Apr 10 10:31:04 localhost kernel: cx25840: FW image md5 digest: > >3a4803384f749d644ee1f1ca9dcb12fa > >Apr 10 10:31:04 localhost kernel: cx25840: FW image sha1 digest: > >2b5e6292b7391c980b93d156cf6b34178ce770f6 > >Apr 10 10:31:04 localhost kernel: ivtv: i2c attach [client=cx25840[1],ok] > >Apr 10 10:31:04 localhost kernel: ivtv: i2c attach [client=wm8775[1],ok] > >Apr 10 10:31:04 localhost kernel: ivtv: Tuner Type 57, Tuner formats > >0x00001000,Radio: yes, Model 0x00914652, Revision 0x00000000 > >Apr 10 10:31:04 localhost kernel: ivtv: NTSC tuner detected > >Apr 10 10:31:04 localhost kernel: ivtv: Radio detected > >Apr 10 10:31:04 localhost kernel: ivtv: Encoder revision: 0x02040011 > >Apr 10 10:31:04 localhost kernel: ivtv: Configuring WinTV PVR 150 card > >with 5 streams > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 0 minor 1 > >Apr 10 10:31:04 localhost kernel: ivtv: Create DMA stream 0 using 1024 > >16384 byte buffers 0 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate DMA stream 0 using > >1024 16384 byte buffers 16777216 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 1 minor 33 > >Apr 10 10:31:04 localhost kernel: ivtv: Create DMA stream 1 > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate DMA stream 1 > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 2 minor 225 > >Apr 10 10:31:04 localhost kernel: ivtv: Create stream 2 using 40 52224 > >byte buffers 0 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate stream 2 using 40 > >52224 byte buffers 2097152 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 3 minor 25 > >Apr 10 10:31:04 localhost kernel: ivtv: Create DMA stream 3 using 455 > >4608 byte buffers 0 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate DMA stream 3 using > >455 4608 byte buffers 2097152 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 4 minor 65 > >Apr 10 10:31:04 localhost kernel: ivtv: Create stream 4 > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate stream 4 > >Apr 10 10:31:04 localhost kernel: ivtv: Setting Tuner 57 > >Apr 10 10:31:04 localhost kernel: tuner: type set to 57 (Philips > >FQ1236A MK4) byivtv i2c driver #1 > >Apr 10 10:31:04 localhost kernel: ivtv: Switching standard to NTSC. > >Apr 10 10:31:05 localhost kernel: ivtv: Initialized WinTV PVR 150, card #1 > >Apr 10 10:31:05 localhost kernel: ivtv: ==================== END INIT > >IVTV ==================== > > > > > >Apr 10 10:30:53 localhost kernel: ivtv: ==================== START > >INIT IVTV ==================== > >Apr 10 10:30:53 localhost kernel: ivtv: version 0.3.2 (q) loading > >Apr 10 10:30:53 localhost kernel: ivtv: Linux version: > >2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4 > >Apr 10 10:30:53 localhost kernel: ivtv: In case of problems please > >include the debug info > >Apr 10 10:30:53 localhost kernel: ivtv: between the START INIT IVTV > >and END INITIVTV lines when > >Apr 10 10:30:53 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. > >Apr 10 10:30:53 localhost kernel: ivtv: Autodetected WinTV PVR 150 card > >Apr 10 10:30:53 localhost kernel: ivtv: Found an iTVC16 based chip > >Apr 10 10:30:53 localhost kernel: ACPI: PCI interrupt 0000:02:08.0[A] > >-> GSI 11 (level, low) -> IRQ 11 > >Apr 10 10:30:53 localhost kernel: ivtv: Unreasonably low latency > >timer, setting to 64 (was 32) > >Apr 10 10:30:53 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor: 0x1106 > >Apr 10 10:30:53 localhost kernel: tveeprom: Hauppauge: model = 23552, > >rev = D492, serial# = 7894440 > >Apr 10 10:30:53 localhost kernel: tveeprom: tuner = Philips FQ1236A > >MK4 (idx = 92, type = 57) > >Apr 10 10:30:53 localhost kernel: tveeprom: tuner fmt = NTSC(M) > >(eeprom = 0x08, v4l2 = 0x00001000) > >Apr 10 10:30:54 localhost kernel: tveeprom: audio_processor = MSP3410D > >(type = 5) > >Apr 10 10:30:54 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] > >Apr 10 10:30:56 localhost kernel: ivtv: Tuner Type 57, Tuner formats > >0x00001000,Radio: yes, Model 0x00914652, Revision 0x00000000 > >Apr 10 10:30:57 localhost kernel: ivtv: NTSC tuner detected > >Apr 10 10:30:58 localhost kernel: ivtv: Radio detected > >Apr 10 10:30:58 localhost kernel: tuner: Ignoring new-style parameters > >in presence of obsolete ones > >Apr 10 10:30:58 localhost kernel: tuner: chip found at addr 0xc2 > >i2c-bus ivtv i2c driver #0 > >Apr 10 10:30:58 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] > >Apr 10 10:30:58 localhost kernel: cx25840: FW image > >'/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > >Apr 10 10:30:58 localhost kernel: cx25840: FW image md5 digest: > >3a4803384f749d644ee1f1ca9dcb12fa > >Apr 10 10:30:58 localhost kernel: cx25840: FW image sha1 digest: > >2b5e6292b7391c980b93d156cf6b34178ce770f6 > >Apr 10 10:30:58 localhost kernel: ivtv: i2c attach [client=cx25840[0],ok] > >Apr 10 10:30:58 localhost kernel: ivtv: i2c attach [client=wm8775[0],ok] > >Apr 10 10:30:59 localhost kernel: ivtv: Encoder revision: 0x02040011 > >Apr 10 10:30:59 localhost kernel: ivtv: Configuring WinTV PVR 150 card > >with 5 streams > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 0 minor 0 > >Apr 10 10:30:59 localhost kernel: ivtv: Create DMA stream 0 using 1024 > >16384 byte buffers 0 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate DMA stream 0 using > >1024 16384 byte buffers 16777216 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 1 minor 32 > >Apr 10 10:30:59 localhost kernel: ivtv: Create DMA stream 1 > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate DMA stream 1 > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 2 minor 224 > >Apr 10 10:30:59 localhost kernel: ivtv: Create stream 2 using 40 52224 > >byte buffers 0 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate stream 2 using 40 > >52224 byte buffers 2097152 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 3 minor 24 > >Apr 10 10:30:59 localhost kernel: ivtv: Create DMA stream 3 using 455 > >4608 byte buffers 0 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate DMA stream 3 using > >455 4608 byte buffers 2097152 kbytes total > >Apr 10 10:30:59 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 4 minor 64 > >Apr 10 10:30:59 localhost kernel: ivtv: Create stream 4 > >Apr 10 10:30:59 localhost kernel: ivtv: Allocate stream 4 > >Apr 10 10:31:00 localhost kernel: ivtv: Setting Tuner 57 > >Apr 10 10:31:00 localhost kernel: tuner: type set to 57 (Philips > >FQ1236A MK4) byivtv i2c driver #0 > >Apr 10 10:31:01 localhost kernel: ivtv: Switching standard to NTSC. > >Apr 10 10:31:02 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 > >Apr 10 10:31:02 localhost kernel: ivtv: Autodetected WinTV PVR 150 card > >Apr 10 10:31:03 localhost kernel: ivtv: Found an iTVC16 based chip > >Apr 10 10:31:03 localhost kernel: ivtv: ivtv_enc_thread: pid = 5797, > >itv = 0xe0d0c220 > >Apr 10 10:31:03 localhost kernel: ACPI: PCI interrupt 0000:02:09.0[A] > >-> GSI 10 (level, low) -> IRQ 10 > >Apr 10 10:31:03 localhost kernel: ivtv: Unreasonably low latency > >timer, setting to 64 (was 32) > >Apr 10 10:31:03 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor: 0x1106 > >Apr 10 10:31:03 localhost kernel: tveeprom: Hauppauge: model = 23552, > >rev = D492, serial# = 7894440 > >Apr 10 10:31:03 localhost kernel: tveeprom: tuner = Philips FQ1236A > >MK4 (idx = 92, type = 57) > >Apr 10 10:31:03 localhost kernel: tveeprom: tuner fmt = NTSC(M) > >(eeprom = 0x08, v4l2 = 0x00001000) > >Apr 10 10:31:03 localhost kernel: tveeprom: audio_processor = MSP3410D > >(type = 5) > >Apr 10 10:31:03 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] > >Apr 10 10:31:03 localhost kernel: tuner: chip found at addr 0xc2 > >i2c-bus ivtv i2c driver #1 > >Apr 10 10:31:03 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] > >Apr 10 10:31:04 localhost kernel: cx25840: FW image > >'/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > >Apr 10 10:31:04 localhost kernel: cx25840: FW image md5 digest: > >3a4803384f749d644ee1f1ca9dcb12fa > >Apr 10 10:31:04 localhost kernel: cx25840: FW image sha1 digest: > >2b5e6292b7391c980b93d156cf6b34178ce770f6 > >Apr 10 10:31:04 localhost kernel: ivtv: i2c attach [client=cx25840[1],ok] > >Apr 10 10:31:04 localhost kernel: ivtv: i2c attach [client=wm8775[1],ok] > >Apr 10 10:31:04 localhost kernel: ivtv: Tuner Type 57, Tuner formats > >0x00001000,Radio: yes, Model 0x00914652, Revision 0x00000000 > >Apr 10 10:31:04 localhost kernel: ivtv: NTSC tuner detected > >Apr 10 10:31:04 localhost kernel: ivtv: Radio detected > >Apr 10 10:31:04 localhost kernel: ivtv: Encoder revision: 0x02040011 > >Apr 10 10:31:04 localhost kernel: ivtv: Configuring WinTV PVR 150 card > >with 5 streams > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 0 minor 1 > >Apr 10 10:31:04 localhost kernel: ivtv: Create DMA stream 0 using 1024 > >16384 byte buffers 0 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate DMA stream 0 using > >1024 16384 byte buffers 16777216 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 1 minor 33 > >Apr 10 10:31:04 localhost kernel: ivtv: Create DMA stream 1 > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate DMA stream 1 > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 2 minor 225 > >Apr 10 10:31:04 localhost kernel: ivtv: Create stream 2 using 40 52224 > >byte buffers 0 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate stream 2 using 40 > >52224 byte buffers 2097152 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 3 minor 25 > >Apr 10 10:31:04 localhost kernel: ivtv: Create DMA stream 3 using 455 > >4608 byte buffers 0 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate DMA stream 3 using > >455 4608 byte buffers 2097152 kbytes total > >Apr 10 10:31:04 localhost kernel: ivtv: Registered v4l2 device, > >streamtype 4 minor 65 > >Apr 10 10:31:04 localhost kernel: ivtv: Create stream 4 > >Apr 10 10:31:04 localhost kernel: ivtv: Allocate stream 4 > >Apr 10 10:31:04 localhost kernel: ivtv: Setting Tuner 57 > >Apr 10 10:31:04 localhost kernel: tuner: type set to 57 (Philips > >FQ1236A MK4) byivtv i2c driver #1 > >Apr 10 10:31:04 localhost kernel: ivtv: Switching standard to NTSC. > >Apr 10 10:31:05 localhost kernel: ivtv: Initialized WinTV PVR 150, card #1 > >Apr 10 10:31:05 localhost kernel: ivtv: ==================== END INIT > >IVTV ==================== > > > > > >On Apr 10, 2005 4:43 AM, Jeremy Huddleston <[EMAIL PROTECTED]> wrote: > > > > > >>On Sat, 2005-04-09 at 21:11 -0600, justin coleman wrote: > >> > >> > >>>I am setting up a new box with a PVR-500 as the capture card. I have > >>>downloaded and installed the latest drivers, I can see the card (it > >>>appears as two 150's). But when I try to access either of the them it > >>>locks up the system. I have my log, but unfortunately can't give you > >>>a log from after the lockup as the only way out is a reboot. Any > >>>assistance would be greatly appreciated. > >>> > >>>Apr 9 19:15:05 localhost kernel: ivtv: ==================== START > >>>INIT IVTV ==================== > >>>Apr 9 19:15:05 localhost kernel: ivtv: version 0.2.0 (rc3i) loading > >>> > >>> > >>Use the 0.3.2 drivers with this card. > >> > >> > >> > >> > >> > > > > > >------------------------------------------------------- > >SF email is sponsored by - The IT Product Guide > >Read honest & candid reviews on hundreds of IT Products from real users. > >Discover which products truly live up to the hype. Start reading now. > >http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > >_______________________________________________ > >ivtv-devel mailing list > >ivtv-devel@lists.sourceforge.net > >https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > > > Well, if it still says q, it probably is q that is being loaded. > Sure you did make && make install? Maybe you left out the install part? > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > ivtv-devel mailing list > ivtv-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
