Two points that I guess weren't clear. 1. I did look in the OLD/ directory and version "T" and the associated diff files are missing. 2. I have tried every driver posted after version "S" and all of them have the same problem.
NOTE: I have a PVR 350, 250 and 150 running quite well under version "S"... I also have a bt878 in the machine but I don't have mythtv configured to use it.
Here is the output from ivtvctl -G
ioctl: IVTV_IOC_G_SAA7115_REG failed (repeated many times)
.
.
.
.
ioctl: IVTV_IOC_G_SAA7115_REG failed
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Here is the output from ivtvctl -a
ioctl: IVTV_IOC_G_CODEC
ioctl: IVTV_IOC_G_CODEC failed
ioctl: VIDIOC_G_FMT
Type : Video Capture
Width : 720
Height : 480
ioctl: VIDIOC_QUERYCAP
Driver name : bttv
Card type : BT878 video (Hauppauge (bt878))
Bus info : PCI:0000:00:0c.0
Driver version: 2319
Capabilities : 0x05010015
sh-3.00$ ivtvctl -a
ioctl: IVTV_IOC_G_CODEC
ioctl: IVTV_IOC_G_CODEC failed
ioctl: VIDIOC_G_FMT
Type : Video Capture
Width : 720
Height : 480
ioctl: VIDIOC_QUERYCAP
Driver name : bttv
Card type : BT878 video (Hauppauge (bt878))
Bus info : PCI:0000:00:0c.0
Driver version: 2319
Capabilities : 0x05010015
ioctl: VIDIOC_ENUMINPUT
Input : 0
Name : Television
Type : 0x00000001
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
Status : 256
Input : 1
Name : Composite1
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
Status : 0
Input : 2
Name : S-Video
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
Status : 0
Input : 3
Name : Composite3
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
Status : 0
ioctl: VIDIOC_G_INPUT
Input = 0
ioctl: VIDIOC_ENUMOUTPUT
ioctl: VIDIOC_G_OUTPUT
ioctl: VIDIOC_G_OUTPUT failed
ioctl: VIDIOC_ENUMAUDIO
ioctl: VIDIOC_G_AUDIO
ioctl: VIDIOC_G_AUDIO failed
ioctl: VIDIOC_G_FREQUENCY
Frequency = 0
ioctl: VIDIOC_ENUMSTD
index : 0
ID : 0x00000000000000FF
Name : PAL
Frame period: 1/25
Frame lines : 625
index : 1
ID : 0x0000000000001000
Name : NTSC
Frame period: 1001/30000
Frame lines : 525
index : 2
ID : 0x00000000007F0000
Name : SECAM
Frame period: 1/25
Frame lines : 625
index : 3
ID : 0x0000000000000400
Name : PAL-Nc
Frame period: 1/25
Frame lines : 625
index : 4
ID : 0x0000000000000100
Name : PAL-M
Frame period: 1001/30000
Frame lines : 525
index : 5
ID : 0x0000000000000200
Name : PAL-N
Frame period: 1/25
Frame lines : 625
index : 6
ID : 0x0000000000002000
Name : NTSC-JP
Frame period: 1001/30000
Frame lines : 525
index : 7
ID : 0x0000000000000800
Name : PAL-60
Frame period: 1/25
Frame lines : 625
ioctl: VIDIOC_G_STD
Standard = 0x00001000
ioctl: VIDIOC_QUERYCTRL
Brightness = 32768
Contrast = 32768
Saturation = 32768
Hue = 32768
__________________________________
The OLD/ directory contains all the older versions, they are moved into
that directory so the main one isn't filled with tons of files, and also
keeps the current version being used upon new downloads.
I think this bug was fixed after U, try the most current and see if it still
exists, let me know if it does.
Thanks,
Chris
On Thu, Apr 14, 2005 at 09:23:11PM -0000, Matt wrote:
> The driver for the PVR150MCD NTSC (1042) has been progressively getting better but the change from version "S" to "U" has broken the tuner input on the driver. I was getting great video but how there is no color and the picture has static in it. I would look at the diff files to figure out what happened but the diff files between version "S and U" are not all posted. In fact, version "T" seems to be missing also. Anyway, I haven't seen this problem reported by anyone else and I was wondering if someonw has found a fix. If I am the only person with this problem then let me know what files you need from me to help track down this problem.
>
>
>
> Just for clarification, the tuner works great with version "S" using the following parameters.
>
>
>
> options ivtv tuner=2,2,47 debug=1
>
> options saa7127 i2c_enable=1,-1
>
> options cx25840 i2c_enable=-1,1 debug=1 no_black_magic=1 cardtype=0 audiofmt=1
>
> options msp3400 simple=1
>
>
>
>
>
> Thanks
>
> Matt
--
---
Chris Kennedy / [EMAIL PROTECTED]
Engineer KMOS-TV/KTBG-FM
Broadcasting Services Department
Central Missouri State University
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
The OLD/ directory contains all the older versions, they are moved into
that directory so the main one isn't filled with tons of files, and also
keeps the current version being used upon new downloads.
I think this bug was fixed after U, try the most current and see if it still
exists, let me know if it does.
Thanks,
Chris
On Thu, Apr 14, 2005 at 09:23:11PM -0000, Matt wrote:
> The driver for the PVR150MCD NTSC (1042) has been progressively getting better but the change from version "S" to "U" has broken the tuner input on the driver. I was getting great video but how there is no color and the picture has static in it. I would look at the diff files to figure out what happened but the diff files between version "S and U" are not all posted. In fact, version "T" seems to be missing also. Anyway, I haven't seen this problem reported by anyone else and I was wondering if someonw has found a fix. If I am the only person with this problem then let me know what files you need from me to help track down this problem.
>
>
>
> Just for clarification, the tuner works great with version "S" using the following parameters.
>
>
>
> options ivtv tuner=2,2,47 debug=1
>
> options saa7127 i2c_enable=1,-1
>
> options cx25840 i2c_enable=-1,1 debug=1 no_black_magic=1 cardtype=0 audiofmt=1
>
> options msp3400 simple=1
>
>
>
>
>
> Thanks
>
> Matt
NOTE: I have a PVR 350, 250 and 150 running quite well under version "S"... I also have a bt878 in the machine but I don't have mythtv configured to use it.
Here is the output from ivtvctl -G
ioctl: IVTV_IOC_G_SAA7115_REG failed (repeated many times)
.
.
.
.
ioctl: IVTV_IOC_G_SAA7115_REG failed
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Here is the output from ivtvctl -a
ioctl: IVTV_IOC_G_CODEC
ioctl: IVTV_IOC_G_CODEC failed
ioctl: VIDIOC_G_FMT
Type : Video Capture
Width : 720
Height : 480
ioctl: VIDIOC_QUERYCAP
Driver name : bttv
Card type : BT878 video (Hauppauge (bt878))
Bus info : PCI:0000:00:0c.0
Driver version: 2319
Capabilities : 0x05010015
sh-3.00$ ivtvctl -a
ioctl: IVTV_IOC_G_CODEC
ioctl: IVTV_IOC_G_CODEC failed
ioctl: VIDIOC_G_FMT
Type : Video Capture
Width : 720
Height : 480
ioctl: VIDIOC_QUERYCAP
Driver name : bttv
Card type : BT878 video (Hauppauge (bt878))
Bus info : PCI:0000:00:0c.0
Driver version: 2319
Capabilities : 0x05010015
ioctl: VIDIOC_ENUMINPUT
Input : 0
Name : Television
Type : 0x00000001
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
Status : 256
Input : 1
Name : Composite1
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
Status : 0
Input : 2
Name : S-Video
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
Status : 0
Input : 3
Name : Composite3
Type : 0x00000002
Audioset: 0x00000001
Tuner : 0x00000000
Standard: 0x00000000007F3FFF ( PAL NTSC SECAM )
Status : 0
ioctl: VIDIOC_G_INPUT
Input = 0
ioctl: VIDIOC_ENUMOUTPUT
ioctl: VIDIOC_G_OUTPUT
ioctl: VIDIOC_G_OUTPUT failed
ioctl: VIDIOC_ENUMAUDIO
ioctl: VIDIOC_G_AUDIO
ioctl: VIDIOC_G_AUDIO failed
ioctl: VIDIOC_G_FREQUENCY
Frequency = 0
ioctl: VIDIOC_ENUMSTD
index : 0
ID : 0x00000000000000FF
Name : PAL
Frame period: 1/25
Frame lines : 625
index : 1
ID : 0x0000000000001000
Name : NTSC
Frame period: 1001/30000
Frame lines : 525
index : 2
ID : 0x00000000007F0000
Name : SECAM
Frame period: 1/25
Frame lines : 625
index : 3
ID : 0x0000000000000400
Name : PAL-Nc
Frame period: 1/25
Frame lines : 625
index : 4
ID : 0x0000000000000100
Name : PAL-M
Frame period: 1001/30000
Frame lines : 525
index : 5
ID : 0x0000000000000200
Name : PAL-N
Frame period: 1/25
Frame lines : 625
index : 6
ID : 0x0000000000002000
Name : NTSC-JP
Frame period: 1001/30000
Frame lines : 525
index : 7
ID : 0x0000000000000800
Name : PAL-60
Frame period: 1/25
Frame lines : 625
ioctl: VIDIOC_G_STD
Standard = 0x00001000
ioctl: VIDIOC_QUERYCTRL
Brightness = 32768
Contrast = 32768
Saturation = 32768
Hue = 32768
__________________________________
The OLD/ directory contains all the older versions, they are moved into
that directory so the main one isn't filled with tons of files, and also
keeps the current version being used upon new downloads.
I think this bug was fixed after U, try the most current and see if it still
exists, let me know if it does.
Thanks,
Chris
On Thu, Apr 14, 2005 at 09:23:11PM -0000, Matt wrote:
> The driver for the PVR150MCD NTSC (1042) has been progressively getting better but the change from version "S" to "U" has broken the tuner input on the driver. I was getting great video but how there is no color and the picture has static in it. I would look at the diff files to figure out what happened but the diff files between version "S and U" are not all posted. In fact, version "T" seems to be missing also. Anyway, I haven't seen this problem reported by anyone else and I was wondering if someonw has found a fix. If I am the only person with this problem then let me know what files you need from me to help track down this problem.
>
>
>
> Just for clarification, the tuner works great with version "S" using the following parameters.
>
>
>
> options ivtv tuner=2,2,47 debug=1
>
> options saa7127 i2c_enable=1,-1
>
> options cx25840 i2c_enable=-1,1 debug=1 no_black_magic=1 cardtype=0 audiofmt=1
>
> options msp3400 simple=1
>
>
>
>
>
> Thanks
>
> Matt
--
---
Chris Kennedy / [EMAIL PROTECTED]
Engineer KMOS-TV/KTBG-FM
Broadcasting Services Department
Central Missouri State University
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
The OLD/ directory contains all the older versions, they are moved into
that directory so the main one isn't filled with tons of files, and also
keeps the current version being used upon new downloads.
I think this bug was fixed after U, try the most current and see if it still
exists, let me know if it does.
Thanks,
Chris
On Thu, Apr 14, 2005 at 09:23:11PM -0000, Matt wrote:
> The driver for the PVR150MCD NTSC (1042) has been progressively getting better but the change from version "S" to "U" has broken the tuner input on the driver. I was getting great video but how there is no color and the picture has static in it. I would look at the diff files to figure out what happened but the diff files between version "S and U" are not all posted. In fact, version "T" seems to be missing also. Anyway, I haven't seen this problem reported by anyone else and I was wondering if someonw has found a fix. If I am the only person with this problem then let me know what files you need from me to help track down this problem.
>
>
>
> Just for clarification, the tuner works great with version "S" using the following parameters.
>
>
>
> options ivtv tuner=2,2,47 debug=1
>
> options saa7127 i2c_enable=1,-1
>
> options cx25840 i2c_enable=-1,1 debug=1 no_black_magic=1 cardtype=0 audiofmt=1
>
> options msp3400 simple=1
>
>
>
>
>
> Thanks
>
> Matt
_________________________________________________________________Get your FREE Budweiser E-mail account at http://budweiser.com Budweiser E-Mail must be used responsibly and only is for consumers 21 years of age and older! Disclaimer: Neither Anheuser-Busch, Inc. (the makers of BUDWEISER beer) nor the operator of this E-Mail service or their respective affiliates have seen, endorsed or approved any of the content in this e-mail and expressly disclaim all liability for the content in whole and in part.
