Hello,
I've exhausted myself trying to get some sound out of
this thing. I've read the docs and Googled till I'm
blue and have tried every ivtvctl I can think of. I'm
ready to raise the white flag (on this card) unless
one of you kind souls can show me what I'm doing
wrong.
I'm have Debian 2.4.27 using the ivtv-0.2.0-rc3h
(rc3i) throws a compile error on the cx25840 module.
I'm using mplayer to test. The video is great but
never a spec of sound. I've cycled through all of the
ivtvctl audio settings (ivtvctl -v 1-8 1-2) and I
tried swapping sound cards. I am using the correct
msp3400 module (it's the module from ivtv).
Here's the IVTV snip from dmesg:
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.2.0 (rc3h) loading
ivtv: Linux version: 2.4.27-2-386
ivtv: In case of problems please include the debug
info
ivtv: between the START INIT IVTV and END INIT IVTV
lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
PCI: Found IRQ 9 for device 00:09.0
ivtv: Unreasonably low latency timer, setting to 64
(was 32)
ivtv: XXX PCI device: 0x1647 vendor: 0x10b9
tuner: chip found @ 0xc2
tuner(bttv): type forced to 2 (Philips NTSC
(FI1236,FM1236 and
compatibles)) [insmod]
ivtv: i2c attach [client=Philips NTSC (FI1236,FM1236
and,ok]
i2c-core.o: client [Philips NTSC (FI1236,FM1236 and]
registered to
adapter [ivtv i2c driver #0](pos. 0).
saa7115: starting probe for adapter ivtv i2c driver #0
(0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
i2c-core.o: client [saa7115[0]] registered to adapter
[ivtv i2c driver
#0](pos. 1).
saa7115: status: (1E) 0x48, (1F) 0xc0
i2c-core.o: adapter ivtv i2c driver #0 registered as
adapter 0.
i2c-core.o: driver tveeprom registered.
tveeprom: Hauppauge: model = 32062, rev = C182,
serial# = 7912747
tveeprom: tuner = LG TAPC H791F (idx = 82, type = 39)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio_processor = MSP3445 (type = 12)
ivtv: i2c attach [client=tveeprom[0],ok]
i2c-core.o: client [tveeprom[0]] registered to adapter
[ivtv i2c driver
#0](pos. 2).
ivtv: Tuner Type 39, Tuner formats 0x00001000, Radio:
yes, Model
0x008d1612, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers
4194304 kbytes
total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers
2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers
2097152 kbytes
total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: ivtv_enc_thread: pid = 233, itv = 0xd89040c0
ivtv: Setting Tuner 39
tuner: type already set (2)
ivtv: Setting audio matrix to input 3, output 1
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV
====================
__________________________________
Yahoo! Mail Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
http://mobile.yahoo.com/learn/mail
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
