If you run lspci -v
can you see any/many other devices sharing the same IRQ as the PVR-350 card? At one point my system was automatically disabling the IRQ due to a conflict resulting in my 350 being unusable for recordings until I either rebooted and it didn't disable the card, or looked into the problem further and disabled the device (it was the printer port). Since then things have been problem free as far as I can tell. (This is on a 32bit Celeron 2.4G/512MB RAM under FC2). During that time, I see many firmware dead messages in the log. I also made sure I was using the latest 0.2.x ivtv release (had used 0.3.x prior but decided to go for stability) and the latest "non-buggy" firmware as reported when the ivtv driver loads. Finally, before compiling a new ivtv, I made completely there were no modules left over from the previous installation of the driver that might conflict. Nick ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_ide95&alloc_id396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
