dmesg for load and after "crash" is attached. I was not able to record anything (I use mythtv017)
After a reboot it works as expected. perhaps someone knows what triggers this. I see ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000082 with result 0xfffffff0 ivtv: ENC: Failed stopping capture -16 from which starts the trouble. Sometimes I unload the driver and insmod it agin. does anyone do this on regular basis to have a save setup ? thanks marcel
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3i) loading ivtv: Linux version: 2.6.8.040822 preempt PENTIUM4 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 16 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x2570 vendor: 0x8086 tveeprom: Ignoring new-style parameters in presence of obsolete ones tveeprom: Hauppauge: model = 48134, rev = J321, serial# = 2770997 tveeprom: tuner = Philips FM1216 (idx = 21, type = 5) tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) tveeprom: audio_processor = CS5331 (type = 9) ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 5, Tuner formats 0x00000007, Radio: yes, Model 0x00a93491, Revision 0x00000001 ivtv: PAL tuner detected ivtv: Radio detected tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: Ignoring new-style parameters in presence of obsolete ones saa7115: starting probe for adapter ISA main adapter (0x0) saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x00, (1F) 0xc0 saa7127: Ignoring new-style parameters in presence of obsolete ones saa7127: video encoder driver version V 0.3 loaded saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[0],ok] msp3400: Ignoring new-style parameters in presence of obsolete ones msp34xx: ivtv version msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Apr 18 2005 18:03:43 ivtv: i2c attach [client=MSP3418W-A2,ok] ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 9 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create DMA stream 8 ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: ivtv_enc_thread: pid = 3610, itv = 0xf8c45320 ivtv: ivtv_dec_thread: pid = 3611, itv = 0xf8c45320 ivtv: Setting Tuner 5 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. saa7115: decoder set norm PAL saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set PAL Video Mode saa7127: Selecting PAL video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ====================
ivtv: ENC: User stopped capture. ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000082 with result 0xfffffff0 ivtv: ENC: Failed stopping capture -16 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000c6 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000082 with result 0xfffffff0 ivtv: ENC: Failed stopping capture -16 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000d5 with result 0xfffffff0 ivtv: ENC: Failed stopping event notification -16 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000d2 with result 0xfffffff0 saa7115: decoder disable output saa7115: decoder enable output ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000d2 with result 0xfffffff0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000d2 with result 0xfffffff0 saa7115: decoder disable output saa7115: decoder enable output ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000d2 with result 0xfffffff0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set size ivtv: No Free Mailbox for cmd 0x000000d6 after 100 tries! ivtv: Mailbox[0] 0x000000d3 flags 0x00000003 ivtv: Mailbox[1] 0x000000d3 flags 0x00000003 ivtv: Mailbox[2] 0x000000c9 flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x000000d6!!! ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000c7 with result 0xfffffff0 ivtv: No Free Mailbox for cmd 0x00000091 after 100 tries! ivtv: Mailbox[0] 0x000000b9 flags 0x00000003 ivtv: Mailbox[1] 0x000000bb flags 0x00000003 ivtv: Mailbox[2] 0x0000008f flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x00000091!!! ivtv: No Free Mailbox for cmd 0x000000b1 after 100 tries! ivtv: Mailbox[0] 0x00000099 flags 0x00000003 ivtv: Mailbox[1] 0x00000095 flags 0x00000003 ivtv: Mailbox[2] 0x00000097 flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x000000b1!!! ivtv: No Free Mailbox for cmd 0x0000009d after 100 tries! ivtv: Mailbox[0] 0x000000c5 flags 0x00000003 ivtv: Mailbox[1] 0x000000bd flags 0x00000003 ivtv: Mailbox[2] 0x0000009b flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x0000009d!!! ivtv: No Free Mailbox for cmd 0x000000d8 after 100 tries! ivtv: Mailbox[0] 0x0000009f flags 0x00000003 ivtv: Mailbox[1] 0x000000a1 flags 0x00000003 ivtv: Mailbox[2] 0x000000d0 flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x000000d8!!! ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000c8 with result 0xfffffff0 ivtv: init error 21. Code -16
