i get a "page allocation failure" when laoding ivtv.

actualy i get that error with all versions i tried on ubuntu. debian on the same machine/same kernel version worked, but sometimes i got that error too.

chris

here is the dmesg output after a simple "modprobe ivtv":

Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.3 (h) loading
ivtv: Linux version: 2.6.10-5-386 preempt 386 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:00:14.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3123 vendor: 0x1106
tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7702831
tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55)
tveeprom: tuner fmt = PAL(B/G) PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07)
tveeprom: audio_processor = MSP3400C (type = 4)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 55, Tuner formats 0x00000e07, Radio: yes, Model 0x008d1657, Revision 0x00000000
ivtv: PAL tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter SMBus Via Pro adapter at 0500 (0x0)
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded.
cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa
cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6
cx25840: Status: cx258423 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1
ivtv: Allocate DMA stream 1
modprobe: page allocation failure. order:5, mode:0xd0
[<c0132c18>] __alloc_pages+0x2a2/0x2bf
[<c0132c54>] __get_free_pages+0x1f/0x3b
[<c013584b>] kmem_getpages+0x1d/0xaf
[<c0136212>] cache_grow+0x9d/0x122
[<c01363ed>] cache_alloc_refill+0x156/0x187
[<c0136635>] __kmalloc+0x4e/0x61
[<cfd0dc1c>] ivtv_stream_alloc+0xb3/0x1d5 [ivtv]
[<cfd126ec>] ivtv_streams_setup+0xeb/0x120 [ivtv]
[<cfd0f52d>] ivtv_probe+0x555/0x80f [ivtv]
[<c01a53c1>] pci_device_probe_static+0x2e/0x41
[<c01a53f3>] __pci_device_probe+0x1f/0x32
[<c01a5422>] pci_device_probe+0x1c/0x31
[<c01ee3c2>] driver_probe_device+0x36/0x54
[<c01ee49b>] driver_attach+0x39/0x6e
[<c01ee816>] bus_add_driver+0x5e/0x80
[<c01eeb93>] driver_register+0x2d/0x31
[<c01a55d3>] pci_register_driver+0x57/0x6a
[<cfd0fc1e>] module_start+0x154/0x183 [ivtv]
[<c0129ac1>] sys_init_module+0xd4/0x1c3
[<c0102ff7>] syscall_call+0x7/0xb
ivtv: Could not allocate SGarray
ivtv: Error -12 setting up streams
ivtv: Error -12 on initialization
ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:00:14.0 failed with error -12
ivtv: ==================== END INIT IVTV ====================



------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to