>From a clean boot, ivtv-03.3.3y doesn't work on my system (pundit-R, suse 9.1, PVR-350),
Linux version 2.6.11-rc2-bk3-20050125153357-default ([EMAIL PROTECTED]) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Tue Jan 25 15:33:57 UTC 2005 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.3 (y) loading ivtv: Linux version: 2.6.11-rc2-bk3-20050125153357-default 586 REGPARM gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 17 (level, low) -> IRQ 201 ivtv: XXX PCI device: 0x5833 vendor: 0x1002 ivtv: i2c attach [client=tveeprom,ok] tveeprom: Hauppauge: model = 48135, rev = J324, serial# = 7245336 tveeprom: tuner = Philips FM1246 (idx = 24, type = 1) tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010) tveeprom: audio_processor = CS5331 (type = 9) ivtv: Tuner Type 1, Tuner formats 0x00000010, Radio: yes, Model 0x00a93494, Revision 0xe0a4f2bf ivtv: PAL tuner detected ivtv: Radio detected tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ISA main adapter (0x0) saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 saa7127: Ignoring new-style parameters in presence of obsolete ones saa7127: video encoder driver version V 0.3 loaded saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[50],ok] msp34xx: ivtv version msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Jan 29 2005 01:05:33 ivtv: i2c attach [client=MSP3418W-A2,ok] ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 160 52224 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 160 52224 byte buffers 8388608 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create DMA stream 6 using 4096 2048 byte buffers 0 kbytes total ivtv: Allocate DMA stream 6 using 4096 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create stream 7 ivtv: Allocate stream 7 ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total ivtv: Allocate DMA stream 8 using 20 103680 byte buffers 2097152 kbytes total ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total ivtv: Setting Tuner 1 tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. ivtv: ivtv_enc_thread: pid = 5982, itv = 0xe0a44020 ivtv: ivtv_dec_thread: pid = 5983, itv = 0xe0a44020 saa7115: decoder set norm PAL saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set PAL Video Mode saa7127: Selecting PAL video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. ivtv-osd: screen coords: [0 0] -> [720 576] ivtv-osd: original global alpha = 208 ivtv-osd: current OSD state = 39 ivtv-osd: new global alpha = 208 (1 255 0) ivtv-osd: framebuffer at 0xf1510000, mapped to 0xe1890000, size 1620k ivtv-osd: mode is 720x576x32, linelength=2880 ivtv-osd: fb1: iTVC15 TV out frame buffer device ivtv: Allocate DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0 saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder disable output saa7115: decoder enable output saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set size saa7115: decoder disable output saa7115: decoder enable output ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 19. ivtv: Check digitizer Sync saa7115: status: 0x91 ivtv: Trying to restart capture. ivtv: ENC: DMA still Pending while stoping capture! saa7115: decoder disable output saa7115: decoder enable output ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0. ivtv: Check digitizer Sync saa7115: status: 0x91 ivtv: Trying to restart capture. ivtv: ENC: DMA still Pending while stoping capture! saa7115: decoder disable output saa7115: decoder enable output ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldnt read clock saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set size saa7115: decoder disable output saa7115: decoder enable output ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 16. ivtv: Check digitizer Sync saa7115: status: 0x91 ivtv: Trying to restart capture. ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000082 with result 0xfffffff0 ivtv: ENC: Failed stopping capture -16 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000d5 with result 0xfffffff0 ivtv: ENC: Failed to stop VIMevent notification -16 ivtv: No Free Mailbox for cmd 0x000000d9 after 100 tries! ivtv: Mailbox[0] 0x000000dc flags 0x00000003 ivtv: Mailbox[1] 0x000000c9 flags 0x00000003 ivtv: Mailbox[2] 0x000000d6 flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x000000d9!!! ivtv: No Free Mailbox for cmd 0x000000dc after 100 tries! ivtv: Mailbox[0] 0x000000db flags 0x00000003 ivtv: Mailbox[1] 0x000000dc flags 0x00000003 ivtv: Mailbox[2] 0x000000dc flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x000000dc!!! ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000b7 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000b7 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000b7 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000b7 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000b7 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000b7 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000b7 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000b7 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x000000b7 with result 0xfffffff0 So I reverted to ivtv-0.3.3v which works. Regards David ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
