On 5/18/05, Min Idzelis <[EMAIL PROTECTED]> wrote:
> I'm also running a D492 card - actually, my serial number is only 3
> after yours and mine's working perfectly.
>
> I'm using FC3 and followed Jarod's guide. I have a Chaintech nForce
> motherboard (not sure the actual model #)
>
> I needed to disable ACPI in my motherboard bios before I could get
> this card to work.
> I'm also using Jarod's /etc/rc.sysinit to load the ivtv modules very
> early on in the startup. (But not using the ramdisk patch)
>
> I'm using the latest testing ivtv driver in atrpm's: currently at
> version 0.3.4 (p)
>
> Here's my modprobe===================
> alias char-major-61 lirc_serial
> options lirc_serial irq=4 io=0x3f8 type=4
> install lirc_serial setserial /dev/ttyS0 uart none; /sbin/modprobe
> --ignore-install lirc_serial
>
> # ivtv modules setup
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> alias char-major-81-1 ivtv
> options cx25840 no_black_magic=1
> options ivtv ivtv_debug=1
> alias tveeprom tveeprom-ivtv
> alias tuner tuner-ivtv
>
> alias eth0 8139too
> install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 &&
> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ;
> }; /sbin/modprobe -r --ignore-remove snd-intel8x0
> alias usb-controller ehci-hcd
> alias usb-controller1 ohci-hcd
> alias scsi_hostadapter sata_nv
> # nvidia kernel module
> alias char-major-195 nvidia-1_0-7174
> alias nvidia nvidia-1_0-7174
> options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1
> #----cut here----
> # I2C module options
> alias char-major-89 i2c-dev
> #----cut here----
>
> my dmesg==================
>
> ivtv: Autodetected WinTV PVR 150 card
> ivtv: Found an iTVC16 based chip
> ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
> ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
> ivtv: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
> tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7893592
> tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio_processor = MSP3410D (type = 5)
> ivtv: i2c attach [client=tveeprom[50],ok]
> ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652,
> Rev
> ision 0x00000000
> ivtv: NTSC tuner detected
> ivtv: Radio detected
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by Oracle Space Sweepstakes
> Want to be the first software developer in space?
> Enter now for the Oracle Space Sweepstakes!
> http://ads.osdn.com/?ad_idt12&alloc_id344&opclick
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>
Still no luck... here's what my lspci gives:
0000:01:08.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
0000:01:0a.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at d4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
0000:02:08.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device e807
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at c8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
0000:02:09.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device e817
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at cc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
It looks like one of the PVR-250 cards is sharing an IRQ with one of
the inputs on the PVR-500... so, I removed the two PVR-250s and tried
again and the same static keeps happening.
There's GOT to be some way to troubleshoot/fix this, but I'm
completely out of ideas :( Jarod, do you have anything you can add
since you ran this card in your machine?
PLEASE HELP!!!
Matt
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_idt12&alloc_id344&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
