What is the tveeprom output? What tuner do they have and are you loading the tda module? NTSC or PAL?
Thanks Jean-Francois Thibert On May 20, 2005 11:28 am, Chris Kennedy wrote: > The first input doesn't have video, second does. The audio probem happens > on both from what I can tell, and here's the lspci -vn output for them... > > 11:08.0 Class 0400: 4444:0016 (rev 01) > Subsystem: 0070:e807 > Flags: bus master, medium devsel, latency 64, IRQ 233 > Memory at b4000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > > 11:09.0 Class 0400: 4444:0016 (rev 01) > Subsystem: 0070:e817 > Flags: bus master, medium devsel, latency 64, IRQ 50 > Memory at b8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > > > > Thanks, > Chris > > On Fri, May 20, 2005 at 11:23:08AM -0400, Jean-Francois Thibert (SageTV) wrote: > > That's interesting, on which input does this problem happen? Also what > > model # of pvr500 is it? > > > > Thanks > > > > Jean-Francois Thibert > > > > On May 20, 2005 11:08 am, Chris Kennedy wrote: > > > On a pvr500 it shows no video, and the audio is totally noisy and goes > > > from low pitch to high pitch, just wrecks it basically. So seems it > > > needs some different logic for those, and don't want to break them. > > > If you can make a patch with just those settings I'll test them on > > > the pvr500 and include them, but seems we need some more research into > > > what is going on since it breaks the pvr500 so badly. > > > > > > Thanks, > > > Chris > > > > > > On Fri, May 20, 2005 at 11:00:28AM -0400, Jean-Francois Thibert > > > (SageTV) > > > > wrote: > > > > May I ask why you are going back to the old cx25840? I'd like to hear > > > > about any problems it caused...At the very least I think you should > > > > keep the adc sets to 3 when disabled and force no_black_magic to 1 > > > > (or remove that code since it's doing tda settings inside the cx25840 > > > > module) > > > > > > > > Thanks > > > > > > > > Jean-Francois Thibert > > > > > > > > On May 20, 2005 10:24 am, Chris Kennedy wrote: > > > > > This is the actual fixes there, last version was not the right one. > > > > > Also please go back and check the cx25840 driver patch and people > > > > > need to figure out what is wrong there so we can get the > > > > > improvements from it, but right now it breaks everything quite > > > > > badly so can't include it till people report success. > > > > > > > > > > #0.3.5: http://www.ivtv.tv/releases/ivtv-0.3/ > > > > > > > > > > Thanks, > > > > > Chris > > > > > > > > ------------------------------------------------------- > > > > This SF.Net email is sponsored by Oracle Space Sweepstakes > > > > Want to be the first software developer in space? > > > > Enter now for the Oracle Space Sweepstakes! > > > > http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click > > > > _______________________________________________ > > > > ivtv-devel mailing list > > > > [email protected] > > > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by Oracle Space Sweepstakes > > Want to be the first software developer in space? > > Enter now for the Oracle Space Sweepstakes! > > http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
