I get very bad audio too. But in the end of the ivtv messages I can see it
chooses NTSC and it doesn't help when I us ivtvctl to change to PAL.
Something that does help though is setting the standard with
modprobe ivtv ivtv_std=2
Fine audio and video!!! Great.
Regards
Christian
The output of "modprobe ivtv" :
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.5 (c) loading
ivtv: Linux version: 2.6.11 preempt PENTIUM4 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
ivtv: XXX PCI device: 0x0648 vendor: 0x1039
tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7705475
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74,
v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model
0x008d2590, Revision 0x00000001
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded.
cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa
cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 24 86400 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 120 17472 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Setting Tuner 58
tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #0
cx25840: decoder set norm NTSC
ivtv: ivtv_enc_thread: pid = 5438, itv = 0xe1374a20
ivtv: ivtv_enc_vbi_thread: pid = 5439, itv = 0xe1374a20
cx25840: decoder set input (6)
cx25840: Tuner Input
ivtv: Switching standard to NTSC.
cx25840: decoder set norm NTSC
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
On Sun, 22 May 2005, [windows-1252] Morten R�nseth wrote:
Audio is fine as paint on my box. I live in PAL country also.
I use ALSA and get sound through a Creative Labs SB Audigy board.
Cheers,
-Morten
Sigurd Nes wrote:
The sound is very poor in 0.3.5.c compared to 0.3.5
I have not tested 0.3.5.b
I live in a PALcountry, is the the black_magic stuff related to this?
Regards
Sigurd
Chris Kennedy wrote:
This should fix a couple problems with YUV decoding, especially
/dev/video48,
now works really nice (uses the vsync interrupt). Also I think the alias
oddity of the other field seen for NTSC is now fixed. It also fixes Myth
ff/rw over 3x speed image not advancing, I *think*, please test and see.
#0.3.5c: http://www.ivtv.tv/releases/ivtv-0.3/
Thanks,
Chris
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
--
-------------------------------------------------------------------
WEB-fx http://www.webfx.no
Morten Lerskau R�nseth mailto:[EMAIL PROTECTED]
Odinsvei 15c +47 6680 9191
1413 T�rn�sen +47 9343 4357 Norway
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_idt12&alloc_id344&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
