On 5/20/05, Fredrik Karlsson <[EMAIL PROTECTED]> wrote:
Hi Nick,
Yes, your right, the firmware is not loaded. However, there seems to
be nothing that I can do to force it fo load with this card order.
If I have the cards the other way around, the FW file is loaded by the
cx25840 module.
Hi,
I think I have found one of the problems in this. The problem seems to
ne that the cx25840 modules is not activated, although it is loaded.
If I do this:
modprobe cx25840 i2c_enable=-1,1
fw_file_name=/lib/modules/HcwMakoA.ROM cardtype=0 debug=1
modprobe ivtv
with the following module settings:
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias char-major-61 lirc_i2c
options wm8775 debug=0
options tuner pal=B debug=0
options ivtv ivtv_std=2 tda9887=0 ivtv_debug=1 cardtype=2,6
options tda9887 pal=B debug=0
options saa7127 i2c_enable=1,-1 debug=1
options cx25840 i2c_enable=1 fw_file_name=/lib/modules/HcwMakoA.ROM
cardtype=0 debug=1
However, with this setup, I cannot get TV out even in this card order
(350 as #0 and 150 as #1).
This is the module output info:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.4 (q) loading
ivtv: Linux version: 2.6.11-gentoo-r6 SMP preempt K7 4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
ivtv: VIA PCI device: 0x3205 vendor: 0x1106
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: client id: cx25840_i2c_id 0, skipped
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7671326
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model
0x00ad2557, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter SMBus Via Pro adapter at 5000 (0x0)
saa7115: starting probe for adapter ISA main adapter (0x0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: May 21 2005 00:43:01
ivtv: i2c attach [client=MSP3418W-B3,ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create DMA stream 6 using 1024 2048 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total
ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: ivtv_enc_thread: pid = 13040, itv = 0xceb294e0
ivtv: ivtv_enc_vbi_thread: pid = 13041, itv = 0xceb294e0
ivtv: ivtv_dec_thread: pid = 13042, itv = 0xceb294e0
ivtv: ivtv_dec_vbi_thread: pid = 13043, itv = 0xceb294e0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
ivtv: VIA PCI device: 0x3205 vendor: 0x1106
cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
cx25840: detecting client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
cx25840: Status: cx258423 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7839719
tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55)
tveeprom: tuner fmt = PAL(B/G) PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07)
tveeprom: audio_processor = MSP3400C (type = 4)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
ivtv: Tuner Type 55, Tuner formats 0x00000e07, Radio: yes, Model
0x008d1657, Revision 0x00000000
ivtv: PAL tuner detected
ivtv: Radio detected
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 2 using 60 34816 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create stream 4
ivtv: Setting Tuner 55
tuner: type set to 55 (LG PAL (TAPE series)) by ivtv i2c driver #1
ivtv: ivtv_enc_thread: pid = 13181, itv = 0xceb4c7e0
ivtv: ivtv_enc_vbi_thread: pid = 13182, itv = 0xceb4c7e0
cx25840: decoder set input (6)
cx25840: Tuner Input
ivtv: Switching standard to PAL.
cx25840: decoder set norm PAL
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV ====================
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_idt12&alloc_id344&opclick
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
