Hi,
this doesn't work with my PVR500 (PAL)
I can't tune any channels with this all I see i snow/noise...
the last working I have is 0.3.4p....

On 0.3.4p I use options audiofmt=0x04
On 0.3.5d I use options ivtv_std=2


Rune Petersen

Chris Kennedy wrote:
This includes the recent patches for audio and YUV, also the hotplug firmware
patch.

#0.3.5d: http://www.ivtv.tv/releases/ivtv-0.3/

Thanks,
Chris

May 23 19:36:01 localhost kernel: ivtv: version 0.3.5 (d) loading
May 23 19:36:01 localhost kernel: ivtv: Linux version: 2.6.11.6 K7 gcc-3.3
May 23 19:36:01 localhost kernel: ivtv: In case of problems please include the 
debug info
May 23 19:36:01 localhost kernel: ivtv: between the START INIT IVTV and END 
INIT IVTV lines when
May 23 19:36:01 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
May 23 19:36:01 localhost kernel: ivtv: Autodetected WinTV PVR 150 card
May 23 19:36:01 localhost kernel: ivtv: Found an iTVC16 based chip
May 23 19:36:01 localhost kernel: ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 18 
(level, low) -> IRQ 18
May 23 19:36:01 localhost kernel: ivtv: Unreasonably low latency timer, setting 
to 64 (was 32)
May 23 19:36:01 localhost kernel: ivtv: VIA PCI device: 0x3189 vendor: 0x1106
May 23 19:36:01 localhost kernel: tveeprom: Hauppauge: model = 23559, rev = 
D591, serial# = 2989621
May 23 19:36:01 localhost kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx 
= 91, type = 56)
May 23 19:36:01 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) 
SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
May 23 19:36:01 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 
5)
May 23 19:36:01 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok]
May 23 19:36:01 localhost kernel: ivtv: Tuner Type 56, Tuner formats 
0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000
May 23 19:36:01 localhost kernel: ivtv: Radio detected
May 23 19:36:01 localhost kernel: tuner: Ignoring new-style parameters in 
presence of obsolete ones
May 23 19:36:01 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv 
i2c driver #0
May 23 19:36:01 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
May 23 19:36:02 localhost kernel: cx25840: Failed to load sha1 digester, 
skipping it.
May 23 19:36:05 localhost kernel: cx25840: FW image '/lib/modules/HcwMakoA.ROM' 
of size 14264 loaded.
May 23 19:36:05 localhost kernel: cx25840: FW image md5 digest: 
3a4803384f749d644ee1f1ca9dcb12fa
May 23 19:36:05 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok]
May 23 19:36:05 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok]
May 23 19:36:06 localhost kernel: ivtv: Encoder revision: 0x02040011
May 23 19:36:06 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 
streams
May 23 19:36:06 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 
minor 0
May 23 19:36:06 localhost kernel: ivtv: Create DMA stream 0 using 128 16384 
byte buffers  0 kbytes total
May 23 19:36:06 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 
minor 32
May 23 19:36:06 localhost kernel: ivtv: Create DMA stream 1 using 20 103680 
byte buffers  0 kbytes total
May 23 19:36:06 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 
minor 224
May 23 19:36:06 localhost kernel: ivtv: Create DMA stream 2 using 165 12635 
byte buffers  0 kbytes total
May 23 19:36:06 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 
minor 24
May 23 19:36:06 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte 
buffers  0 kbytes total
May 23 19:36:06 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 
minor 64
May 23 19:36:06 localhost kernel: ivtv: Create stream 4 
May 23 19:36:06 localhost kernel: ivtv: Setting Tuner 56
May 23 19:36:06 localhost kernel: tuner: type set to 56 (Philips PAL/SECAM 
multi (FQ1216AME MK4)) by ivtv i2c driver #0
May 23 19:36:07 localhost kernel: ivtv: Switching standard to PAL.
May 23 19:36:07 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0
May 23 19:36:07 localhost kernel: ivtv: Autodetected WinTV PVR 150 card
May 23 19:36:07 localhost kernel: ivtv: Found an iTVC16 based chip
May 23 19:36:07 localhost kernel: ivtv: ivtv_enc_thread: pid = 2865, itv = 
0xe090d620
May 23 19:36:07 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 2866, itv = 
0xe090d620
May 23 19:36:07 localhost kernel: ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 19 
(level, low) -> IRQ 19
May 23 19:36:07 localhost kernel: ivtv: Unreasonably low latency timer, setting 
to 64 (was 32)
May 23 19:36:07 localhost kernel: ivtv: VIA PCI device: 0x3189 vendor: 0x1106
May 23 19:36:07 localhost kernel: tveeprom: Hauppauge: model = 23559, rev = 
D591, serial# = 2989621
May 23 19:36:07 localhost kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx 
= 91, type = 56)
May 23 19:36:07 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) 
SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
May 23 19:36:07 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 
5)
May 23 19:36:07 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok]
May 23 19:36:07 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv 
i2c driver #1
May 23 19:36:07 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
May 23 19:36:07 localhost kernel: cx25840: Failed to load sha1 digester, 
skipping it.
May 23 19:36:11 localhost kernel: cx25840: FW image '/lib/modules/HcwMakoA.ROM' 
of size 14264 loaded.
May 23 19:36:11 localhost kernel: cx25840: FW image md5 digest: 
3a4803384f749d644ee1f1ca9dcb12fa
May 23 19:36:11 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok]
May 23 19:36:11 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok]
May 23 19:36:11 localhost kernel: ivtv: Tuner Type 56, Tuner formats 
0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000
May 23 19:36:11 localhost kernel: ivtv: Radio detected
May 23 19:36:12 localhost kernel: ivtv: Encoder revision: 0x02040011
May 23 19:36:12 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 
streams
May 23 19:36:12 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 
minor 1
May 23 19:36:12 localhost kernel: ivtv: Create DMA stream 0 using 128 16384 
byte buffers  0 kbytes total
May 23 19:36:12 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 
minor 33
May 23 19:36:12 localhost kernel: ivtv: Create DMA stream 1 using 20 103680 
byte buffers  0 kbytes total
May 23 19:36:12 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 
minor 225
May 23 19:36:12 localhost kernel: ivtv: Create DMA stream 2 using 165 12635 
byte buffers  0 kbytes total
May 23 19:36:12 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 
minor 25
May 23 19:36:12 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte 
buffers  0 kbytes total
May 23 19:36:12 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 
minor 65
May 23 19:36:12 localhost kernel: ivtv: Create stream 4 
May 23 19:36:12 localhost kernel: ivtv: Setting Tuner 56
May 23 19:36:12 localhost kernel: tuner: type set to 56 (Philips PAL/SECAM 
multi (FQ1216AME MK4)) by ivtv i2c driver #1
May 23 19:36:12 localhost kernel: ivtv: Switching standard to PAL.
May 23 19:36:12 localhost kernel: ivtv: Initialized WinTV PVR 150, card #1

Reply via email to