Just had 0.3.4p (patched with John's YUV Patch) lock up on output, results from logs As below
Cutdown version ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000044 with result 0xfffffff0 ivtv: No Free Mailbox for cmd 0x00000047 after 100 tries! ivtv: Mailbox[0] 0x00000053 flags 0x00000003 ivtv: Mailbox[1] 0x00000053 flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x00000047!!! ivtv: DEC: couldn't read clock ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Allocate DMA stream 6 using 1024 2048 byte buffers 1048576 kbytes total ivtv: COULDN'T INITIALIZE DECODER SOURCE -16 ivtv: Failed to start decoding for stream 5 Startup May 16 07:26:02 pvr kernel: ivtv: ==================== START INIT IVTV ==================== May 16 07:26:02 pvr kernel: ivtv: version 0.3.4 (p) loading May 16 07:26:02 pvr kernel: ivtv: Linux version: 2.6.11-rc2-bk3-20050125153357-default 586 REGPARM gcc-3.3 May 16 07:26:02 pvr kernel: ivtv: In case of problems please include the debug info May 16 07:26:02 pvr kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when May 16 07:26:02 pvr kernel: ivtv: mailing the ivtv-devel mailinglist. May 16 07:26:02 pvr kernel: ivtv: Autodetected WinTV PVR 350 card May 16 07:26:02 pvr kernel: ivtv: Found an iTVC15 based chip May 16 07:26:02 pvr kernel: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 17 (level, low) -> IRQ 201 May 16 07:26:02 pvr kernel: ivtv: XXX PCI device: 0x5833 vendor: 0x1002 May 16 07:26:02 pvr /sbin/hotplug[4107]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:02 pvr kernel: ivtv: i2c attach [client=tveeprom,ok] May 16 07:26:02 pvr kernel: tveeprom: Hauppauge: model = 48135, rev = J324, serial# = 7245336 May 16 07:26:02 pvr kernel: tveeprom: tuner = Philips FM1246 (idx = 24, type = 1) May 16 07:26:02 pvr kernel: tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010) May 16 07:26:02 pvr kernel: tveeprom: audio_processor = CS5331 (type = 9) May 16 07:26:02 pvr kernel: ivtv: Tuner Type 1, Tuner formats 0x00000010, Radio: yes, Model 0x00a93494, Revision 0xe0a5fce7 May 16 07:26:02 pvr kernel: ivtv: PAL tuner detected May 16 07:26:02 pvr kernel: ivtv: Radio detected May 16 07:26:02 pvr kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 May 16 07:26:02 pvr kernel: ivtv: i2c attach [client=(tuner unset),ok] May 16 07:26:03 pvr /sbin/hotplug[5057]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:03 pvr kernel: saa7115: starting probe for adapter ISA main adapter (0x0) May 16 07:26:03 pvr kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) May 16 07:26:03 pvr kernel: saa7115: detecting saa7115 client on address 0x42 May 16 07:26:03 pvr kernel: saa7115: writing init values May 16 07:26:03 pvr kernel: ivtv: i2c attach [client=saa7115[50],ok] May 16 07:26:03 pvr kernel: saa7115: status: (1E) 0x48, (1F) 0xc0 May 16 07:26:03 pvr kernel: saa7127: Ignoring new-style parameters in presence of obsolete ones May 16 07:26:03 pvr kernel: saa7127: video encoder driver version V 0.3 loaded May 16 07:26:03 pvr kernel: saa7127: detecting saa7127 client on address 0x88 May 16 07:26:03 pvr kernel: saa7127: Selecting NTSC video Standard May 16 07:26:03 pvr kernel: saa7127: Selecting S-Video+Composite May 16 07:26:03 pvr kernel: saa7127: Turn WSS off May 16 07:26:03 pvr kernel: saa7127: Widescreen Mode 4:3 Full Format May 16 07:26:03 pvr kernel: saa7127: Selecting Normal Encoder Input May 16 07:26:03 pvr kernel: saa7127: Enable Video Output May 16 07:26:03 pvr kernel: ivtv: i2c attach [client=saa7127[50],ok] May 16 07:26:03 pvr /sbin/hotplug[4107]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:03 pvr ifup: No configuration found for sit0 May 16 07:26:03 pvr kernel: msp34xx: ivtv version May 16 07:26:03 pvr kernel: msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode May 16 07:26:03 pvr kernel: msp34xx: $Id$ compiled on: Jan 29 2005 01:05:33 May 16 07:26:03 pvr /sbin/hotplug[5227]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:03 pvr /sbin/hotplug[5057]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:03 pvr kernel: ivtv: i2c attach [client=MSP3418W-A2,ok] May 16 07:26:04 pvr /sbin/hotplug[5227]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:04 pvr /sbin/hotplug[5057]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:04 pvr kernel: ivtv: Encoder revision: 0x02040011 May 16 07:26:04 pvr kernel: ivtv: Decoder revision: 0x02020023 May 16 07:26:04 pvr kernel: ivtv: Configuring WinTV PVR 350 card with 10 streams May 16 07:26:04 pvr kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0 May 16 07:26:04 pvr kernel: ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total May 16 07:26:04 pvr kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32 May 16 07:26:04 pvr kernel: ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total May 16 07:26:04 pvr kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224 May 16 07:26:04 pvr kernel: ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total May 16 07:26:04 pvr kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24 May 16 07:26:04 pvr kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total May 16 07:26:04 pvr kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64 May 16 07:26:04 pvr kernel: ivtv: Create stream 4 May 16 07:26:05 pvr kernel: ivtv: Registered v4l2 device, streamtype 5 minor 16 May 16 07:26:05 pvr kernel: ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total May 16 07:26:05 pvr kernel: ivtv: Registered v4l2 device, streamtype 6 minor 228 May 16 07:26:05 pvr kernel: ivtv: Create DMA stream 6 using 1024 2048 byte buffers 0 kbytes total May 16 07:26:05 pvr kernel: ivtv: Registered v4l2 device, streamtype 7 minor 232 May 16 07:26:05 pvr kernel: ivtv: Create stream 7 May 16 07:26:05 pvr kernel: ivtv: Registered v4l2 device, streamtype 8 minor 48 May 16 07:26:05 pvr kernel: ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total May 16 07:26:05 pvr kernel: ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total May 16 07:26:05 pvr kernel: ivtv: Setting Tuner 1 May 16 07:26:05 pvr kernel: tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by ivtv i2c driver #0 May 16 07:26:05 pvr kernel: saa7115: decoder set input (4) May 16 07:26:05 pvr kernel: saa7115: now setting Composite input May 16 07:26:05 pvr kernel: ivtv: Setting audio matrix to input 3, output 1 May 16 07:26:05 pvr kernel: ivtv: Switching standard to PAL. May 16 07:26:05 pvr kernel: ivtv: ivtv_enc_thread: pid = 6121, itv = 0xe0a45720 May 16 07:26:05 pvr kernel: ivtv: ivtv_enc_vbi_thread: pid = 6122, itv = 0xe0a45720 May 16 07:26:05 pvr kernel: ivtv: ivtv_dec_thread: pid = 6123, itv = 0xe0a45720 May 16 07:26:05 pvr kernel: ivtv: ivtv_dec_vbi_thread: pid = 6124, itv = 0xe0a45720 May 16 07:26:05 pvr kernel: saa7115: decoder set norm PAL May 16 07:26:05 pvr kernel: saa7115: set audio: 0x01 May 16 07:26:05 pvr kernel: saa7127: Setting Encoder Video Standard May 16 07:26:05 pvr kernel: saa7127: Set PAL Video Mode May 16 07:26:05 pvr kernel: saa7127: Selecting PAL video Standard May 16 07:26:05 pvr kernel: ivtv: Initialized WinTV PVR 350, card #0 May 16 07:26:05 pvr kernel: ivtv: ==================== END INIT IVTV ==================== May 16 07:26:05 pvr /sbin/hotplug[5227]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:05 pvr /sbin/hotplug[5057]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:06 pvr kernel: ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) May 16 07:26:06 pvr kernel: ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. May 16 07:26:06 pvr kernel: ivtv-osd: screen coords: [0 0] -> [720 576] May 16 07:26:06 pvr kernel: ivtv-osd: original global alpha = 208 May 16 07:26:06 pvr /sbin/hotplug[5227]: /sbin/hotplug: line 74: [: too many arguments May 16 07:26:06 pvr kernel: ivtv-osd: current OSD state = 39 May 16 07:26:06 pvr kernel: ivtv-osd: new global alpha = 208 (1 255 0) May 16 07:26:06 pvr kernel: ivtv-osd: framebuffer at 0xf1510000, mapped to 0xe1910000, size 1620k May 16 07:26:06 pvr kernel: ivtv-osd: mode is 720x576x32, linelength=2880 May 16 07:26:06 pvr kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer device May 16 07:26:06 pvr kernel: ivtv: Allocate DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total And the full errors. ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000044 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x0000004a with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000045 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x0000004b with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000050 with result 0xfffffff0 ivtv: No Free Mailbox for cmd 0x00000047 after 100 tries! ivtv: Mailbox[0] 0x00000053 flags 0x00000003 ivtv: Mailbox[1] 0x00000053 flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x00000047!!! ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Allocate DMA stream 6 using 1024 2048 byte buffers 1048576 kbytes total ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x0000001a with result 0xfffffff0 ivtv: COULDN'T INITIALIZE DECODER SOURCE -16 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000001 with result 0xfffffff0 ivtv: Failed to start decoding for stream 5 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x0000001a with result 0xfffffff0 ivtv: COULDN'T INITIALIZE DECODER SOURCE -16 ivtv: No Free Mailbox for cmd 0x00000001 after 100 tries! ivtv: Mailbox[0] 0x00000008 flags 0x00000003 ivtv: Mailbox[1] 0x00000008 flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x00000001!!! ivtv: Failed to start decoding for stream 5 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x0000001a with result 0xfffffff0 ivtv: COULDN'T INITIALIZE DECODER SOURCE -16 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000001 with result 0xfffffff0 ivtv: Failed to start decoding for stream 5 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x0000001a with result 0xfffffff0 ivtv: COULDN'T INITIALIZE DECODER SOURCE -16 ivtv: No Free Mailbox for cmd 0x00000001 after 100 tries! ivtv: Mailbox[0] 0x00000008 flags 0x00000003 ivtv: Mailbox[1] 0x00000008 flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x00000001!!! ivtv: Failed to start decoding for stream 5 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x0000001a with result 0xfffffff0 ivtv: COULDN'T INITIALIZE DECODER SOURCE -16 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000001 with result 0xfffffff0 ivtv: Failed to start decoding for stream 5 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldn't read clock ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x0000001a with result 0xfffffff0 ivtv: COULDN'T INITIALIZE DECODER SOURCE -16 ivtv: No Free Mailbox for cmd 0x00000001 after 100 tries! ivtv: Mailbox[0] 0x00000008 flags 0x00000003 ivtv: Mailbox[1] 0x00000008 flags 0x00000003 ivtv: Firmware UNRESPONSIVE when trying cmd 0x00000001!!! ivtv: Failed to start decoding for stream 5 Regards David ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_idt12&alloc_id344&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
