What are your module-options? Make sure you don't have duplicate modules (like tuner, tveeprom).
N. On 5/27/05, Marcel Pol <[EMAIL PROTECTED]> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Hello, > Some time ago I bought an ivtv based card, but couldn't get it to work. > Now I'm willing to put in some time, and see if I can get it to work. > Problem is, it's not doing anything, no video or audio, it's just dead > as a rock. > > I have pasted the debug output in this mail, I hope it's usefull to find > something. I'm using an Nforce2 based motherboard (Soltek), and booted > with the "noapic" option. > > I tried following the faq, and used "./ivtvctl -p 1-9", but everytime > capturing to a file just resulted in an empty file. 'm really clueless > where to go from here. > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.2.0 (rc3i) loading > ivtv: Linux version: 2.6.11-7.mm.3mdk preempt 586 gcc-3.4 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 250 card > ivtv: Found an iTVC16 based chip > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > ivtv: i2c attach [client=tveeprom,ok] > ivtv: i2c attach [client=(tuner unset),ok] > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[1],ok] > saa7115: status: (1E) 0x48, (1F) 0xc0 > msp34xx: init: chip=MSP3418W-A2 +nicam +simple +simpler +radio mode=simpler > msp34xxg: daemon started > ivtv: i2c attach [client=MSP3418W-A2,ok] > tveeprom: Hauppauge: model = 32054, rev = B148, serial# = 2758703 > tveeprom: tuner = LG TP18PSB11D (idx = 48, type = 29) > tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) > tveeprom: audio_processor = CS5331 (type = 9) > ivtv: Tuner Type 29, Tuner formats 0x00000007, Radio: yes, Model > 0x00891518, Revision 0xe0aaacac > ivtv: PAL tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02040011 > ivtv: Configuring WinTV PVR 250 card with 5 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Setting Tuner 29 > tuner 0-0061: type set to 29 (LG PAL_BG (TPI8PSB11D)) > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: ivtv_enc_thread: pid = 7333, itv = 0xe0a9fba0 > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to PAL. > saa7115: decoder set norm PAL > saa7115: set audio: 0x01 > ivtv: Initialized WinTV PVR 250, card #0 > ivtv: ==================== END INIT IVTV ==================== > > Regards, > - -- > Marcel Pol > > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.0 (GNU/Linux) > Comment: Using GnuPG with Mandriva - http://enigmail.mozdev.org > > iD8DBQFClzIcMgeuL0xhZZ4RAhVoAKDQmAZK3d1eZadRhTF6ys7Jl0YQ3gCfVqtA > ekA2/Xq2JASWXXjWzPC00VE= > =arnV > -----END PGP SIGNATURE----- > > > ------------------------------------------------------- > This SF.Net email is sponsored by Yahoo. > Introducing Yahoo! Search Developer Network - Create apps using Yahoo! > Search APIs Find out how you can build Yahoo! directly into your own > Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- This SF.Net email is sponsored by Yahoo. Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
