On 5/26/05, Ryan Steffes <[EMAIL PROTECTED]> wrote:
> After having searched through the ivtv list archives, I feel like the
> solutions I'm reading stop one step short of me understanding what to
> do. I have a working WinTV FM card now and I'm trying to add a
> PVR150. Since I'm running 2.6.8.1-10mdk, is it currently not possible
> for me to get both cards fully working without a kernel upgrade? When
> I install the ivtv drivers, the sound kicks out on my bttv card now,
> however I can't get the 150 to work at all. Nothing seems to be
> wrong, so much as it just doesn't work. I get blackness interlaced
> with occasional static when set to the tuner.
As an update, I updated to 2.6.11 and I'm not a ton closer. The bttv
is working properly; the PVR150 just isn't doing much at all. I am
using msp3400.ko and tuner.ko from ivtv 0.3.5h.
****************************
modprobe.conf
alias autofs autofs4
alias char-major-81-0 bttv
options bttv radio=1 bttv_verbose=1 tuner=2 card=2 gbuffers=8
alias char-major-81 videodev
alias char-major-81-1 ivtv
#options ivtv debug=1
options saa7127 i2c_enable=-1
options cx25840 i2c_enable=1
options msp3400 debug=0 simple=1 simpler=0
alias char-major-61-* lirc_serial
alias char-major-116-* snd
alias char-major-14-* soundcore
alias sound-slot-0 snd-via82xx
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias eth0 via-rhine
install bttv { modprobe -k tuner; modprobe -k msp3400; } ;
/sbin/modprobe --first-time --ignore-install bttv
install snd-via82xx /sbin/modprobe --first-time --ignore-install
snd-via82xx && { /sbin/modprobe snd-pcm-oss; /bin/true; }
install usb-interface /sbin/modprobe usb-uhci; /sbin/modprobe
ehci-hcd; /bin/true
remove snd-via82xx { /sbin/modprobe -r snd-pcm-oss; } ; /sbin/modprobe
-r --first-time --ignore-remove snd-via82xx
*************************
dmesg:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.5 (h) loading
ivtv: Linux version: 2.6.11-6mdk K7 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: VIA PCI device: 0x3205 vendor: 0x1106
tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7827197
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
0x00892598, Revision 0x00000001
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create stream 4
ivtv: Setting Tuner 47
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
cx25840: decoder set norm NTSC
ivtv: ivtv_enc_thread: pid = 7433, itv = 0xda261220
ivtv: ivtv_enc_vbi_thread: pid = 7434, itv = 0xda261220
cx25840: decoder set input (6)
cx25840: Tuner Input
cx25840: set audio input (0)
ivtv: Switching standard to NTSC.
cx25840: decoder set norm NTSC
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
I'm at an utter loss. Nothing SEEMS to be wrong, except it just
doesn't work. To test, I'm doing the following:
# ivtvctl -d /dev/video1 -p 6 -u 0x003000 -f width=720,height=480
#/home/mythtv/ivtv-0.3.5h/utils/ptune.pl --input /dev/video1 --channel 5
#cat /dev/video1 >test.mpg
# mplayer test.mpg
Here's an example of the result:
http://www.afferentsys.com/~rbsteffes/test.mpg
As you can see, it's not QUITE static and it's not quite solid black.
I don't know what it's doing.
Any help would be greatly appreciated.
--Ryan
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
