Well, I was also kind of disappointed to learn that two PVR-350's don't provide two fb's... (but it's not really that high on my wishlist).
If Doug isn't able to assist in this, it sounds like somehting I might be capable of doing (with some support from you of course). Finally something I can do to give something back to the project... Stanley. > It's not supported at the moment. There are a load of global variables in > the ivtv-osd code. > I believe it could be made to work but no one else has asked for it > before. > If you fancy trying to make it work I can probably talk you through most > of > what I believe needs doing or at some point I could try to edit it and > send > you a version that may work better. But I am busy trying to get the Xv > code > to behave better and have other things to do so I don't have a lot of time > to help. > > > John > >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:ivtv-devel- >> [EMAIL PROTECTED] On Behalf Of Doug Conyers >> Sent: 02 June 2005 02:11 >> To: [email protected] >> Subject: [ivtv-devel] Two PVR-350s, desiring Two TV-OUTS, but only >> getting >> one fb >> >> Hello - >> >> Yes, I'm one of those dreaded newbie's trying to learn FC3, MythTV, >> ivtv and lots of other stuff that is relatively foreign to me. I >> apologize in advance if I am making a stupid mistake, and I'd greatly >> appreciate any help you might be able to provide. >> >> Just to clarify, I had a single PVR-350 installed and working >> without issue. As best I know, I simply made the changes for the >> additional PVR-350 and now I only have a single /dev/fb0 (in addition >> to the fb1 for the monitor) that seems to be a collision of both >> TV-outs and therefore barely works at all. >> >> My general question is: How do I configure ivtv-fb so that it will >> recognize both of my PVR-350 cards installed in the computer and >> create an individual framebuffer for each ('/dev/fb1' and '/dev/fb2'). >> >> I'm running ivtv version 0.2.0 (rc3j) using a pre-compiled >> distribution of FC3 and Kernel version 2.6.11-1.14_FC3. I have >> followed Jarod's website on building this system and have used >> pre-compiled packages as he guide instructs. >> > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by Yahoo. > Introducing Yahoo! Search Developer Network - Create apps using Yahoo! > Search APIs Find out how you can build Yahoo! directly into your own > Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > ------------------------------------------------------- This SF.Net email is sponsored by Yahoo. Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
