Tyler,
hopefully this will give you a clue of what's happening; the read has
a couple of different values (after power on, fmif level).
Rob, are you also getting this?
0.3.4s:
=======
tda9885/6/7: insmod fixup: PAL => PAL-BG
tda9885/6/7: configure for: PAL-BG
tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09
tda9885/6/7: write: byte B 0xd4
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : QSS
B3-4 tv sound/radio : FM/TV
B5 force mute audio: no
B6 output port 1 : high (inactive)
B7 output port 2 : high (inactive)
tda9885/6/7: write: byte C 0x70
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : 50
C7 audio gain : 0
tda9885/6/7: write: byte E 0x09
E0-1 sound carrier : 5.5 MHz
E6 l pll ganting : 13
E2-4 video if : 38.9 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
tda9885/6/7: read: 0xdf
after power on : yes
afc : + 12.5 kHz
fmif level : low
afc window : in
vfi level : high
0.3.5t:
=======
tda9885/6/7: insmod fixup: PAL => PAL-BG
tda9885/6/7: configure for: PAL-BG
tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09
tda9885/6/7: write: byte B 0xd4
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : QSS
B3-4 tv sound/radio : FM/TV
B5 force mute audio: no
B6 output port 1 : high (inactive)
B7 output port 2 : high (inactive)
tda9885/6/7: write: byte C 0x70
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : 50
C7 audio gain : 0
tda9885/6/7: write: byte E 0x09
E0-1 sound carrier : 5.5 MHz
E6 l pll ganting : 13
E2-4 video if : 38.9 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
tda9885/6/7: read: 0xfe
after power on : no
afc : + 12.5 kHz
fmif level : high
afc window : in
vfi level : high
N.
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=fad-ysdn-ostg-q22005
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
Well after fidling around, I got the sound working now.. Only thing is,
I don't have a clue which setting helped, or if it still works after a
reboot. It's a bit of a shame that I did'nt enable debug for the 8775.
Now it is working, my wife has confiscated the recordings and I'll have
to wait untill tomorrow cause the machine is recording with mythtv right
now without any problems at all.
Can I maybe dump some registers from this working setup to compare with
a non working config? I cannot say if the sound will work after a
reboot, but I'll tell you tomorrow... To be sure, this is my logging and
I used the script as stated before (only line in modprobe.conf is
tda9887 qss=0).
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.5 (p) loading
ivtv: Linux version: 2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: XXX PCI device: 0x0735 vendor: 0x1039
tveeprom: Hauppauge: model = 48034, rev = G742, serial# = 6252580
tveeprom: tuner = Temic 4009FR5 (idx = 42, type = 20)
tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
tveeprom: audio_processor = MSP3415 (type = 6)
ivtv: i2c attach [client=tveeprom[50],ok]
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005)
ivtv: Tuner Type 20, Tuner formats 0x00000007, Radio: yes, Model
0x009d7512, Revision 0x00000001
ivtv: Radio detected
saa7115: starting probe for adapter SiS96x SMBus adapter at 0x0c00 (0x0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
msp34xx: ivtv version
msp34xx: init: chip=MSP3415G-B8, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: May 31 2005 16:32:35
ivtv: i2c attach [client=MSP3415G-B8,ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 80 25920 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 41 50540 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Setting Tuner 20
tuner: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)) by
ivtv i2c driver #0
saa7115: decoder set norm PAL
spurious 8259A interrupt: IRQ7.
saa7115: set audio: 0x01
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 3242, itv = 0xd8bbd220
ivtv: ivtv_enc_vbi_thread: pid = 3243, itv = 0xd8bbd220
ivtv: i2c client addr: 0x43 not found for command 1076917763!
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: XXX PCI device: 0x0735 vendor: 0x1039
tveeprom: Hauppauge: model = 26559, rev = B260, serial# = 7678930
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
wm8775: starting probe for adapter ivtv i2c driver #1 (0x10005)
wm8775: detecting client on address 0x36
wm8775: Offset reset.reg[0]=2e00
wm8775: Offset reset.reg[1]=0e00
wm8775: Offset reset.reg[2]=1600
wm8775: Offset reset.reg[3]=1800
wm8775: Offset reset.reg[4]=1a00
wm8775: Offset reset.reg[5]=1c00
wm8775: Offset reset.reg[6]=1e00
wm8775: Offset reset.reg[7]=2000
wm8775: Offset reset.reg[8]=2200
wm8775: Offset reset.reg[9]=2400
wm8775: Offset reset.reg[10]=2600
wm8775: Offset reset.reg[11]=2800
wm8775: Offset reset.reg[12]=2a00
wm8775: Updating reg[R23]=2e01 added Reset with default 1
wm8775: Updating reg[R7]=0e00 added TOD with default 0
wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
wm8775: Updating reg[R11]=1620 added ADCWL with default 2
wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
wm8775: Updating reg[R12]=1800 added ADCMS with default 0
wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
wm8775: Updating reg[R13]=1a00 added AINPD with default 0
wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
wm8775: Updating reg[R13]=1a00 added PWDN with default 0
wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
wm8775: Updating reg[R14]=1ccf added LAG with default 207
wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
wm8775: Updating reg[R15]=1ecf added RAG with default 207
wm8775: Updating reg[R16]=2000 added LCSEL with default 0
wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
wm8775: Updating reg[R16]=207b added LCT with default 11
wm8775: Updating reg[R17]=2200 added LCEN with default 0
wm8775: Updating reg[R17]=2200 added ALCZC with default 0
wm8775: Updating reg[R17]=2200 added HLD with default 0
wm8775: Updating reg[R18]=2430 added DCY with default 3
wm8775: Updating reg[R18]=2432 added ATK with default 2
wm8775: Updating reg[R19]=2600 added NGTH with default 0
wm8775: Updating reg[R19]=2600 added NGAT with default 0
wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
wm8775: Updating reg[R21]=2a01 added AMX with default 1
wm8775: Final reset.reg[0]=2e01
wm8775: Final reset.reg[1]=0e00
wm8775: Final reset.reg[2]=1622
wm8775: Final reset.reg[3]=1802
wm8775: Final reset.reg[4]=1a00
wm8775: Final reset.reg[5]=1ccf
wm8775: Final reset.reg[6]=1ecf
wm8775: Final reset.reg[7]=207b
wm8775: Final reset.reg[8]=2200
wm8775: Final reset.reg[9]=2432
wm8775: Final reset.reg[10]=2600
wm8775: Final reset.reg[11]=2826
wm8775: Final reset.reg[12]=2a01
wm8775: Offset reset.reg[0]=2e00
wm8775: Offset reset.reg[1]=0e00
wm8775: Offset reset.reg[2]=1600
wm8775: Offset reset.reg[3]=1800
wm8775: Offset reset.reg[4]=1a00
wm8775: Offset reset.reg[5]=1c00
wm8775: Offset reset.reg[6]=1e00
wm8775: Offset reset.reg[7]=2000
wm8775: Offset reset.reg[8]=2200
wm8775: Offset reset.reg[9]=2400
wm8775: Offset reset.reg[10]=2600
wm8775: Offset reset.reg[11]=2800
wm8775: Offset reset.reg[12]=2a00
wm8775: Updating reg[R23]=2e01 added Reset with default 1
wm8775: Updating reg[R7]=0e00 added TOD with default 0
wm8775: Updating reg[R11]=1600 added ADCHPD with default 0
wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0
wm8775: Updating reg[R11]=1620 added ADCWL with default 2
wm8775: Updating reg[R11]=1620 added ADCBCP with default 0
wm8775: Updating reg[R11]=1620 added ADCLRP with default 0
wm8775: Updating reg[R11]=1622 added ADCFMT with default 2
wm8775: Updating reg[R12]=1800 added ADCMS with default 0
wm8775: Updating reg[R12]=1800 added ADCOSR with default 0
wm8775: Updating reg[R12]=1802 added ADCRATE with default 2
wm8775: Updating reg[R13]=1a00 added AINPD with default 0
wm8775: Updating reg[R13]=1a00 added ADCPD with default 0
wm8775: Updating reg[R13]=1a00 added PWDN with default 0
wm8775: Updating reg[R14]=1c00 added ZCLA with default 0
wm8775: Updating reg[R14]=1ccf added LAG with default 207
wm8775: Updating reg[R15]=1e00 added ZCRA with default 0
wm8775: Updating reg[R15]=1ecf added RAG with default 207
wm8775: Updating reg[R16]=2000 added LCSEL with default 0
wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7
wm8775: Updating reg[R16]=207b added LCT with default 11
wm8775: Updating reg[R17]=2200 added LCEN with default 0
wm8775: Updating reg[R17]=2200 added ALCZC with default 0
wm8775: Updating reg[R17]=2200 added HLD with default 0
wm8775: Updating reg[R18]=2430 added DCY with default 3
wm8775: Updating reg[R18]=2432 added ATK with default 2
wm8775: Updating reg[R19]=2600 added NGTH with default 0
wm8775: Updating reg[R19]=2600 added NGAT with default 0
wm8775: Updating reg[R20]=2820 added TRANWIN with default 2
wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6
wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0
wm8775: Updating reg[R21]=2a00 added MUTELA with default 0
wm8775: Updating reg[R21]=2a00 added MUTERA with default 0
wm8775: Updating reg[R21]=2a01 added AMX with default 1
wm8775: Final reset.reg[0]=2e01
wm8775: Final reset.reg[1]=0e00
wm8775: Final reset.reg[2]=1622
wm8775: Final reset.reg[3]=1802
wm8775: Final reset.reg[4]=1a00
wm8775: Final reset.reg[5]=1ccf
wm8775: Final reset.reg[6]=1ecf
wm8775: Final reset.reg[7]=207b
wm8775: Final reset.reg[8]=2200
wm8775: Final reset.reg[9]=2432
wm8775: Final reset.reg[10]=2600
wm8775: Final reset.reg[11]=2826
wm8775: Final reset.reg[12]=2a01
wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
wm8775: Updating register 2 (R11), config: 1622 active: 1621.
wm8775: Updating register 3 (R12), config: 1802 active: 1902.
wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
wm8775: Skipping register 7 (R16), config: 207b active: 207b.
wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
wm8775: Updating register 9 (R18), config: 2432 active: 2482.
wm8775: Updating register 10 (R19), config: 2600 active: 2601.
wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
ivtv: i2c attach [client=wm8775[50],ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model
0x00892590, Revision 0x00000001
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create DMA stream 1 using 80 25920 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 2 using 41 50540 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create stream 4
ivtv: Setting Tuner 58
tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #1
cx25840: decoder set norm PAL
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to PAL.
ivtv: Initialized WinTV PVR 150, card #1
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.322 / Virus Database: 267.4.1 - Release Date: 6/2/2005
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
