The card is NTSC. I've added ivtv options suggested in
previous posts. Still no sound..
dmesg:
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.3.6 (e) loading
ivtv: Linux version: 2.6.10-5-amd64-k8 gcc-3.3
ivtv: In case of problems please include the debug
info
ivtv: between the START INIT IVTV and END INIT IVTV
lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 16 (level,
low) -> IRQ 16
ivtv: XXX PCI device: 0x00e1 vendor: 0x10de
tveeprom: Hauppauge: model = 26032, rev = C199,
serial# = 7840396
tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x00001000)
tveeprom: audio_processor = TDA9850 (type = 3)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio:
yes, Model 0x008d1659, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver
#0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter ivtv i2c driver #0
(0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: writing init values
cx25840: requesting /lib/modules/HcwMakoA.ROM
cx25840: firmware load failed
cx25840: Status: cx258413 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 1024 4096 byte buffers
 0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 4096 byte
buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 97 43200 byte buffers 
0 kbytes total
ivtv: Allocate DMA stream 1 using 97 43200 byte
buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 480 4368 byte buffers 
0 kbytes total
ivtv: Allocate DMA stream 2 using 480 4368 byte
buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 
0 kbytes total
ivtv: Allocate DMA stream 3 using 455 4608 byte
buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Allocate stream 4
ivtv: Setting Tuner 50
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver
#0
cx25840: decoder set norm NTSC
ivtv: ivtv_enc_thread: pid = 15892, itv =
0xffffffffa03d7c80
ivtv: ivtv_enc_vbi_thread: pid = 15893, itv =
0xffffffffa03d7c80
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================  END INIT IVTV 
====================
ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4
ln 24 sz 1456
ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines
0x00000140
cx25840: decoder disable output
cx25840: decoder enable output
cx25840: decoder set norm NTSC
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)

ivtv options:
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias tveeprom tveeprom-ivtv
options ivtv ivtv_debug=1 tda9887=0
alias tuner tuner-ivtv 
alias msp3400 msp3400-ivtv



--- Bryan Mayland <[EMAIL PROTECTED]> wrote:

> Is this PAL or NTSC, and can you post the dmesg
> output from the IVTV 
> init (starting at START INIT IVTV)?
> 
> Jerry Burgess wrote:
> 
> >non mce PVR-150, latest ivtv 0.3.6f,
> >options:
> >alias char-major-81 videodev
> >alias char-major-81-0 ivtv
> >
> >  
> >
> >  
> >
> 
> 
>
-------------------------------------------------------
> This SF.Net email is sponsored by: NEC IT Guy Games.
>  How far can you shotput
> a projector? How fast can you ride your desk chair
> down the office luge track?
> If you want to score the big prize, get to know the
> little guy.  
> Play to win an NEC 61" plasma display:
> http://www.necitguy.com/?r=20
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
> 



-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.  How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.  
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to