Hi
A while back I had problems initialising my 150MCE type 38 PAL card upon
startup, I only got black picture with garbage at the bottom. Using
0.3.5p solved this:
Vedran Rodic wrote:
Vedran Rodic wrote:
Okay, I was using the wrong input number for tuner, it was 4 in
0.3.2d, and now it's 6.
I've briefly tried 0.3.5o, and I get some hiccups in the mpeg2 stream.
To clarify my report, I'm now able to tune to a channel and get a
mpeg2 stream, but it seems to have some continuity problems. I get
some hiccups in playback and xine says: "Not multiplexed? 0xbe". I'll
try with older 0.3.5 versions and report later. There is nothing in
the dmesg on the ERR debug level.
And Morten, 0.3.5o seems to work after a cold boot for me. I turn off
the machine, take the power plug out for a short time, and it works.
Vedran
And 0.3.5p now works for me even after cold booting :-) Thanks!
Alas, 0.3.6 versions yet again show only black when starting myth after
a cold boot.
I do "/sbin/modprobe -v ivtv ivtv_std=2 tda9887=0" upon startup, but I
only get static...
Going back to 0.3.5 fixes this :-(
Anybody knows why this is happening?
--
-------------------------------------------------------------------
WEB-fx
Morten Lerskau Rønseth http://www.webfx.no
Odinsvei 15c mailto:[EMAIL PROTECTED]
1413 Tårnåsen Tlf.: (47) 6680 9191
Norway Mob : (47) 9343 4357
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
