Hi, With ivtv-0.3.6l I get audio on tuner #2, but no audio on tuner #1.
My setup is a lonely PVR-500 (PAL). options I use is ivtv_std=2 tda9887=0 I have tried port0=0 & port1=0, but it didn't help... Any ideas? Rune Petersen
Jun 16 17:34:41 localhost kernel: ivtv: version 0.3.6 (l) loading Jun 16 17:34:41 localhost kernel: ivtv: Linux version: 2.6.11.6 K7 gcc-3.3 Jun 16 17:34:41 localhost kernel: ivtv: In case of problems please include the debug info Jun 16 17:34:41 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Jun 16 17:34:41 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Jun 16 17:34:41 localhost kernel: ivtv: Autodetected WinTV PVR 150 card Jun 16 17:34:41 localhost kernel: ivtv: Found an iTVC16 based chip Jun 16 17:34:41 localhost kernel: ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 18 (level, low) -> IRQ 18 Jun 16 17:34:41 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32) Jun 16 17:34:41 localhost kernel: ivtv: VIA PCI device: 0x3189 vendor: 0x1106 Jun 16 17:34:41 localhost kernel: tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2989621 Jun 16 17:34:41 localhost kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) Jun 16 17:34:41 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Jun 16 17:34:41 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jun 16 17:34:41 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jun 16 17:34:41 localhost kernel: ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000 Jun 16 17:34:41 localhost kernel: ivtv: Radio detected Jun 16 17:34:41 localhost kernel: tuner: Ignoring new-style parameters in presence of obsolete ones Jun 16 17:34:41 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Jun 16 17:34:41 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Jun 16 17:34:41 localhost kernel: cx25840: starting probe for adapter ISA main adapter (0x0) Jun 16 17:34:41 localhost kernel: cx25840: starting probe for adapter SMBus Via Pro adapter at 5000 (0x0) Jun 16 17:34:41 localhost kernel: cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) Jun 16 17:34:41 localhost kernel: cx25840: detecting cx25840 client on address 0x88 Jun 16 17:34:41 localhost kernel: cx25840: writing init values Jun 16 17:34:41 localhost kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM Jun 16 17:34:42 localhost kernel: cx25840: firmware loaded Jun 16 17:34:42 localhost kernel: cx25840: Status: cx258433 (DEVICE_ID) Jun 16 17:34:42 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] Jun 16 17:34:42 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] Jun 16 17:34:42 localhost kernel: tda9885/6/7: chip found @ 0x86 Jun 16 17:34:42 localhost kernel: ivtv: i2c attach [client=tda9887,ok] Jun 16 17:34:43 localhost kernel: ivtv: Encoder revision: 0x02050032 Jun 16 17:34:43 localhost kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jun 16 17:34:43 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jun 16 17:34:43 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0 Jun 16 17:34:43 localhost kernel: ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total Jun 16 17:34:43 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32 Jun 16 17:34:43 localhost kernel: ivtv: Create DMA stream 1 using 161 12960 byte buffers 0 kbytes total Jun 16 17:34:43 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224 Jun 16 17:34:43 localhost kernel: ivtv: Create DMA stream 2 using 165 12635 byte buffers 0 kbytes total Jun 16 17:34:43 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24 Jun 16 17:34:43 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total Jun 16 17:34:43 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64 Jun 16 17:34:43 localhost kernel: ivtv: Create stream 4 Jun 16 17:34:43 localhost kernel: ivtv: Setting Tuner 56 Jun 16 17:34:43 localhost kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 Jun 16 17:34:43 localhost kernel: cx25840: decoder set norm PAL Jun 16 17:34:43 localhost kernel: cx25840: decoder set input (6) Jun 16 17:34:43 localhost kernel: cx25840: now setting Tuner input Jun 16 17:34:43 localhost kernel: cx25840: set audio input (0) Jun 16 17:34:43 localhost kernel: ivtv: Switching standard to PAL. Jun 16 17:34:43 localhost kernel: cx25840: decoder set norm PAL Jun 16 17:34:43 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 Jun 16 17:34:43 localhost kernel: ivtv: Autodetected WinTV PVR 150 card Jun 16 17:34:43 localhost kernel: ivtv: Found an iTVC16 based chip Jun 16 17:34:43 localhost kernel: ivtv: ivtv_enc_thread: pid = 2814, itv = 0xe0929a20 Jun 16 17:34:43 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 2815, itv = 0xe0929a20 Jun 16 17:34:43 localhost kernel: ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 19 Jun 16 17:34:43 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32) Jun 16 17:34:43 localhost kernel: ivtv: VIA PCI device: 0x3189 vendor: 0x1106 Jun 16 17:34:43 localhost kernel: tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2989621 Jun 16 17:34:43 localhost kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) Jun 16 17:34:43 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Jun 16 17:34:43 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jun 16 17:34:43 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jun 16 17:34:43 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 Jun 16 17:34:43 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Jun 16 17:34:43 localhost kernel: cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) Jun 16 17:34:43 localhost kernel: cx25840: detecting cx25840 client on address 0x88 Jun 16 17:34:43 localhost kernel: cx25840: writing init values Jun 16 17:34:43 localhost kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM Jun 16 17:34:45 localhost kernel: cx25840: firmware loaded Jun 16 17:34:45 localhost kernel: cx25840: Status: cx258433 (DEVICE_ID) Jun 16 17:34:45 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] Jun 16 17:34:45 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] Jun 16 17:34:45 localhost kernel: tda9885/6/7: chip found @ 0x86 Jun 16 17:34:45 localhost kernel: ivtv: i2c attach [client=tda9887,ok] Jun 16 17:34:45 localhost kernel: ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000 Jun 16 17:34:45 localhost kernel: ivtv: Radio detected Jun 16 17:34:46 localhost kernel: ivtv: Encoder revision: 0x02050032 Jun 16 17:34:46 localhost kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jun 16 17:34:46 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jun 16 17:34:46 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 1 Jun 16 17:34:46 localhost kernel: ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total Jun 16 17:34:46 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 33 Jun 16 17:34:46 localhost kernel: ivtv: Create DMA stream 1 using 161 12960 byte buffers 0 kbytes total Jun 16 17:34:46 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 225 Jun 16 17:34:46 localhost kernel: ivtv: Create DMA stream 2 using 165 12635 byte buffers 0 kbytes total Jun 16 17:34:46 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 25 Jun 16 17:34:46 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total Jun 16 17:34:46 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 65 Jun 16 17:34:46 localhost kernel: ivtv: Create stream 4 Jun 16 17:34:46 localhost kernel: ivtv: Setting Tuner 56 Jun 16 17:34:46 localhost kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 Jun 16 17:34:46 localhost kernel: cx25840: decoder set norm PAL Jun 16 17:34:46 localhost kernel: cx25840: decoder set input (6) Jun 16 17:34:46 localhost kernel: cx25840: now setting Tuner input Jun 16 17:34:46 localhost kernel: cx25840: set audio input (0) Jun 16 17:34:46 localhost kernel: ivtv: Switching standard to PAL. Jun 16 17:34:46 localhost kernel: cx25840: decoder set norm PAL Jun 16 17:34:46 localhost kernel: ivtv: Initialized WinTV PVR 150, card #1
