The patch took care of it. These messages are no longer generated. Thanks, --Chris
Bryan Mayland wrote: > Try this patch out. The problem is that when we probe for the cx25840, > we ask the adapter if it can do SMBus byte transfers and that I801 > adapter can indeed do SMBus byte transfers. However, when we actually > go to use the bus, we expect a direct I2C level transfer, which it does > not, so we error out. > > I modified the code to check the adapter for the proper I2C-level > transfer on probe, but the problem is that the i2c-algo-bit doesn't > correctly report that it supports it until kernel 2.6.11(although it has > all along). So this is kinda a hack, but it should work better. > > Chris (Kennedy), should we consider revising our code to use SMBus > functions? cx25840_write/read will be easy, but the audio firmware > upload will have to be "chunkified" since a SMBus block transfer can > only do 16 bytes at a time. Thoughts? > > Chris Baumgartner wrote: > > >i2c_adapter i2c-1: I2C level transfers not supported > > > > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
