My hunch is that your xserver doesn't have XVideo extension enabled. I don't know why but it should show up in xdpyinfo. If it doesn't show up there then xvinfo probably won't show any support.
John > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:ivtv-devel- > [EMAIL PROTECTED] On Behalf Of Martyn Honeyford > Sent: 21 June 2005 23:22 > To: ivtv-devel@lists.sourceforge.net > Subject: [ivtv-devel] Can't quite get Xv support working > > Hi All, > > I've been using the 0.2 branch very sucessfully for a few months now with > Myth and I'm just starting > to play around with the 0.3 branch - I'm specifically interested in > getting > Xv support working with > DVDs and eventually XMame using the TV out of my PAL PVR-350. > > I'm running gentoo with a 2.6.11-11 kernel and I've hacked together an > ebuild to compile and > install 0.3.6p along with the associated binary X driver. > > This all appears to work fine, with Myth - I can record shows and the TV > out is still all working, > but Xv support does not seem to be working. > > mythtv ~ # vim /etc/X11/xorg.conf > -------------------- > Section "Device" > Identifier "Hauppauge PVR350" > Driver "ivtvdev" > Option "fbdev" "/dev/fb0" > BusID "PCI:0:9:0" > Option "VideoOverlay" "On" > # Option "XVideo" "On" > EndSection > > Section "Monitor" > Identifier "PAL TV" > HorizSync 30-68 > VertRefresh 50-120 > Mode "720x576" > DotClock 42.6 > HTimings 720 760 832 944 > VTimings 576 577 580 602 > Flags "-HSync" "-VSync" > EndMode > EndSection > > Section "Screen" > Identifier "TV" > Device "Hauppauge PVR350" > Monitor "PAL TV" > DefaultDepth 24 > DefaultFbbpp 32 > Subsection "Display" > Depth 24 > FbBpp 32 > Modes "720x576" > EndSubsection > EndSection > > Section "Module" > Load "v4l" > EndSection > -------------------- > > Not sure if the v4l stuff is required, but was getting desperate ;-) > > mythtv ~ # xdpyinfo -display :0 > > -------------------- > name of display: :0.0 > version number: 11.0 > vendor string: Gentoo Linux (The X.Org Foundation 6.8.2, revision > r1-0.1.2) > vendor release number: 60802000 > X.Org version: 6.8.2 > maximum request size: 262140 bytes > motion buffer size: 256 > bitmap unit, bit order, padding: 32, LSBFirst, 32 > image byte order: LSBFirst > number of supported pixmap formats: 7 > supported pixmap formats: > depth 1, bits_per_pixel 1, scanline_pad 32 > depth 4, bits_per_pixel 8, scanline_pad 32 > depth 8, bits_per_pixel 8, scanline_pad 32 > depth 15, bits_per_pixel 16, scanline_pad 32 > depth 16, bits_per_pixel 16, scanline_pad 32 > depth 24, bits_per_pixel 32, scanline_pad 32 > depth 32, bits_per_pixel 32, scanline_pad 32 > keycode range: minimum 8, maximum 255 > focus: window 0x40000a, revert to None > number of extensions: 12 > DAMAGE > LBX > MIT-SHM > RANDR > RENDER > SECURITY > XC-APPGROUP > XFIXES > XFree86-Bigfont > XInputExtension > XKEYBOARD > XTEST > default screen number: 0 > number of screens: 1 > > screen #0: > print screen: no > dimensions: 720x576 pixels (244x195 millimeters) > resolution: 75x75 dots per inch > depths (7): 24, 1, 4, 8, 15, 16, 32 > root window id: 0x35 > depth of root window: 24 planes > number of colormaps: minimum 1, maximum 1 > default colormap: 0x20 > default number of colormap cells: 256 > preallocated pixels: black 0, white 16777215 > options: backing-store NO, save-unders NO > largest cursor: 720x576 > current input event mask: 0x404030 > EnterWindowMask LeaveWindowMask KeymapStateMask > PropertyChangeMask > number of visuals: 1 > default visual id: 0x21 > visual: > visual id: 0x21 > class: TrueColor > depth: 24 planes > available colormap entries: 256 per subfield > red, green, blue masks: 0xff0000, 0xff00, 0xff > significant bits in color specification: 8 bits > ------------------- > > Using: "mplayer -vo xv x.mpg" gives, > -------------- > Xlib: extension "XFree86-VidModeExtension" missing on display ":0.0". > vo: X11 running at 720x576 with depth 24 and 32 bpp (":0" => local > display) > Xlib: extension "XVideo" missing on display ":0.0". > Sorry, Xv not supported by this X11 version/driver > -------------- > > In the Xorg log file, I see the following, > ------------ > Init Video > (II) IVTVDEV_TST(0)Enabling Xv support for PVR350 > (==) RandR enabled > -------- > > Any ideas would be greatly appreciated I've tried as many combinations as > I > can think of but can't quite > seem to get it.... > > Thanks, > > Martyn. > > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > _______________________________________________ > ivtv-devel mailing list > ivtv-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ivtv-devel ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
