Hi,
recent drivers aren't performing very well, I'm experiencing
random lockups where the card stops functioning.
The message that comes up is the following:
,--8<---
...
saa7115: decoder disable output
saa7115: decoder enable output
ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes
trans_id = 0.
ivtv: Check digitizer Sync
saa7115: status: 0x91
ivtv: Trying to restart capture.
ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444
ivtv: Setup VBI start 0x002fea04 frames 4 fpi 1 lines 0x000000f1
saa7115: decoder disable output
saa7115: decoder enable output
ivtv: ENC: Sleep timeout interrupted. # CTRL+C
`--->8--
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.6 (p) loading
ivtv: Linux version: 2.6.12 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ivtv: XXX PCI device: 0x00e1 vendor: 0x10de
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7596706
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model
0x00ad2557, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter BUS1 (0xf0000)
saa7115: starting probe for adapter BUS2 (0xf0000)
saa7115: starting probe for adapter BUS3 (0xf0000)
saa7115: starting probe for adapter ISA main adapter (0x0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x80, (1F) 0x90
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Jun 22 2005 15:11:52
ivtv: i2c attach [client=MSP3418W-B3,ok]
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 164 x 12740 buffers (2048KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Registered v4l2 device for decoder MPEG minor 16
ivtv: Create DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv: Registered v4l2 device for decoder VBI minor 228
ivtv: Create DMA decoder VBI stream: 1024 x 2048 buffers (2048KB total)
ivtv: Registered v4l2 device for decoder VOUT minor 232
ivtv: Create decoder VOUT stream
ivtv: Registered v4l2 device for decoder YUV minor 48
ivtv: Create DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
ivtv: Create DMA decoder OSD stream: 32 x 65536 buffers (2048KB total)
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 14569, itv = 0xffffffff880a14e0
ivtv: ivtv_enc_vbi_thread: pid = 14570, itv = 0xffffffff880a14e0
ivtv: ivtv_dec_thread: pid = 14571, itv = 0xffffffff880a14e0
ivtv: ivtv_dec_vbi_thread: pid = 14572, itv = 0xffffffff880a14e0
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
Arch: amd64, OS: GNU/Linux
HW: Hauppauge pvr350 ( PAL )
Using MPlayer directly to /dev/v4l/video0
Thanks.
nuno
--
"Non-free programs are dangerous to you and to your community.
Don't let them get a place in your life." - RMS
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
