Hi,

Chris Kennedy wrote:

To get VBI working do this...

run...

ivtvctl -w cc,wss; ivtvctl -b cc,wss; ivtvctl -x 1

then turn on CC support in your TV set, so CC is displayed on output, check normal TV to confirm this is on.

Then cat /dev/video0 > /dev/video16 or any other form of encoding from the card and decoding that video with the card should produce CC.

Thanks,
Chris

I just installed 0.3.6q and ran "ivtvctl -w cc,wss; ivtvctl -b cc,wss; ivtvctl -x 1". here is the output:

ioctl IVTV_IOC_S_VBI_PASSTHROUGH ok
VBI passthrough mode set to 0000000c
ioctl IVTV_IOC_S_VBI_MODE ok
vbi service_set set to 0000000c
ioctl IVTV_IOC_S_VBI_EMBED failed: Invalid argument

Output from /var/løog/messages:

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.6 (q) loading
ivtv: Linux version: 2.6.8.1-12mdk 686 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: VIA PCI device: 0x3205 vendor: 0x1106
tveeprom: Hauppauge: model = 26559, rev = C257, serial# = 7607292
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x008d2557, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 164 x 12740 buffers (2048KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
cx25840: decoder set norm PAL
cx25840: decoder set input (6)
cx25840: Tuner Input
ivtv: Switching standard to PAL.
cx25840: decoder set norm PAL
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================  END INIT IVTV  ====================




BTW, I'd love for the 0.3.6 series to be able to start my pvr150 correctly after a cold boot - the last version that does is 0.3.5. (re "pvr150 only capturing noise"). :-)


Cheers,


-Morten

--
-------------------------------------------------------------------
WEB-fx
Morten Lerskau Rønseth           http://www.webfx.no
Odinsvei 15c                     mailto:[EMAIL PROTECTED]
1413 Tårnåsen                    Tlf.: (47) 6680 9191
Norway                           Mob : (47) 9343 4357



-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to