This is a recently purchased Hauppauge PVR-150 (non-MCE) card. Let me know if I can provide any more info. Interestingly enough, when using ivtv-0.2.0-rc3j, the tuner type defaulted to PVR-150, not -250. It didn't work either way.
-=Mark ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.3 (k) loading ivtv: Linux version: 2.6.11-gentoo-r11 PENTIUM4 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device: 0070/0003 ivtv: Defaulting to WinTV PVR 250 card ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv ivtv: Prefix your subject line with [UNKNOWN CARD]. ivtv: Found an iTVC16 based chip PCI: Found IRQ 5 for device 0000:01:03.0 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x2560 vendor: 0x8086 ivtv: Failed to load module tveeprom ivtv: i2c client addr: 0x50 not found! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. ivtv: Failed to load module tuner ivtv: Failed to load module saa7115 ivtv: Failed to load module msp3400 ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 250 card with 4 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 80 52224 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 80 52224 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Could not detect tuner standard, defaulting to NTSC. ivtv: i2c client id: 0x02 not found! ivtv: i2c client addr: 0x21 not found! ivtv: Setting audio matrix to input 3, output 1 ivtv: i2c client addr: 0x40 not found! ivtv: i2c client addr: 0x40 not found! ivtv: i2c client addr: 0x40 not found! ivtv: Switching standard to NTSC. ivtv: i2c client id: 0x02 not found! ivtv: i2c client addr: 0x40 not found! ivtv: i2c client addr: 0x21 not found! ivtv: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
