I lost the audio on the both 500-tuners when moving to ivtv-0.3.6v.
ivtv-0.3.6n,ivtv-0.3.6p and ivtv-0.3.6u works fine.

1 x pvr350
1 x pvr500mce
PAL
Kernel 2.6.12

Regards

Sigurd


Ant Daniel wrote:
I've just managed to get the 0.3.6 series installed on my FC3.

However there is no audio coming out from my PVR-350, I tried first
with 0.3.6n (which I had been trying to install previous;y) and then
again with 0.3.6v.

This currently makes this worthless for me and I've had to revert back
to 0.2.0 rc3j

I don't know if there's any audio coming from the sound card as is
isn't hooked up (although I will have to do this to get the xv stuff
working)

Ant.

Jun 29 15:07:01 olympus kernel: ivtv: ==================== START INIT
IVTV ====================
Jun 29 15:07:02 olympus kernel: ivtv: version 0.3.6 (v) loading
Jun 29 15:07:02 olympus kernel: ivtv: Linux version: 2.6.11-1.27_FC3
686 REGPARM 4KSTACKS gcc-3.4
Jun 29 15:07:02 olympus kernel: ivtv: In case of problems please
include the debug info
Jun 29 15:07:02 olympus kernel: ivtv: between the START INIT IVTV and
END INIT IVTV lines when
Jun 29 15:07:02 olympus xinetd[3937]: xinetd Version 2.3.13 started
with libwrap loadavg options compiled in.
Jun 29 15:07:02 olympus kernel: ivtv: mailing the ivtv-devel mailinglist.
Jun 29 15:07:02 olympus xinetd[3937]: Started working: 0 available services
Jun 29 15:07:02 olympus kernel: ivtv: Autodetected WinTV PVR 350 card
Jun 29 15:07:02 olympus kernel: ivtv: Found an iTVC15 based chip
Jun 29 15:07:02 olympus kernel: ACPI: PCI Interrupt Link [LNK3]
enabled at IRQ 12
Jun 29 15:07:02 olympus kernel: PCI: setting IRQ 12 as level-triggered
Jun 29 15:07:02 olympus kernel: ACPI: PCI interrupt 0000:01:06.0[A] ->
GSI 12 (level, low) -> IRQ 12
Jun 29 15:07:02 olympus kernel: ivtv: Unreasonably low latency timer,
setting to 64 (was 32)
Jun 29 15:07:02 olympus kernel: ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
Jun 29 15:07:02 olympus kernel: ivtv: Failed to load module tveeprom
Jun 29 15:07:02 olympus kernel: ivtv: i2c client addr: 0x50 not found
for command 0x0!
Jun 29 15:07:02 olympus kernel: ivtv: Error -19 reading Hauppauge eeprom.
Jun 29 15:07:02 olympus kernel: ivtv: Possible causes: the tveeprom
module was not loaded, or
Jun 29 15:07:02 olympus kernel: ivtv: the eeprom kernel module was
loaded before the tveeprom module.
Jun 29 15:07:02 olympus kernel: tuner: Ignoring new-style parameters
in presence of obsolete ones
Jun 29 15:07:02 olympus kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #0
Jun 29 15:07:02 olympus kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jun 29 15:07:02 olympus kernel: saa7115: starting probe for adapter
ivtv i2c driver #0 (0x10005)
Jun 29 15:07:02 olympus kernel: saa7115: detecting saa7115 client on
address 0x42
Jun 29 15:07:02 olympus kernel: saa7115: writing init values
Jun 29 15:07:02 olympus kernel: ivtv: i2c attach [client=saa7115[50],ok]
Jun 29 15:07:02 olympus kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
Jun 29 15:07:02 olympus kernel: saa7127: Ignoring new-style parameters
in presence of obsolete ones
Jun 29 15:07:02 olympus kernel: saa7127: video encoder driver version
V 0.3 loaded
Jun 29 15:07:02 olympus kernel: saa7127: detecting saa7127 client on
address 0x88
Jun 29 15:07:02 olympus kernel: saa7127: Selecting NTSC video Standard
Jun 29 15:07:02 olympus kernel: saa7127: Selecting S-Video+Composite
Jun 29 15:07:02 olympus kernel: saa7127: Turn WSS off
Jun 29 15:07:02 olympus kernel: saa7127: Widescreen Mode 4:3 Full Format
Jun 29 15:07:02 olympus kernel: saa7127: Selecting Normal Encoder Input
Jun 29 15:07:02 olympus kernel: saa7127: Enable Video Output
Jun 29 15:07:02 olympus kernel: ivtv: i2c attach [client=saa7127[50],ok]
Jun 29 15:07:02 olympus kernel: ivtv: Failed to load module msp3400
Jun 29 15:07:02 olympus kernel: ivtv: Encoder revision: 0x02040024
Jun 29 15:07:02 olympus kernel: ivtv: Encoder Firmware may be buggy,
use version 0x02040011
Jun 29 15:07:02 olympus kernel: ivtv: Decoder revision: 0x02020023
Jun 29 15:07:02 olympus kernel: ivtv: Configuring WinTV PVR 350 card
with 10 streams
Jun 29 15:07:02 olympus kernel: ivtv: Registered v4l2 device for
encoder MPEG minor 0
Jun 29 15:07:02 olympus kernel: ivtv: Create DMA encoder MPEG stream:
0 x 32768 buffers (0KB total)
Jun 29 15:07:03 olympus kernel: ivtv: Registered v4l2 device for
encoder YUV minor 32
Jun 29 15:07:03 olympus kernel: ivtv: Create DMA encoder YUV stream: 0
x 12960 buffers (0KB total)
Jun 29 15:07:03 olympus kernel: ivtv: Registered v4l2 device for
encoder VBI minor 224
Jun 29 15:07:03 olympus kernel: ivtv: Create DMA encoder VBI stream: 0
x 12740 buffers (0KB total)
Jun 29 15:07:03 olympus kernel: ivtv: Registered v4l2 device for
encoder PCM audio minor 24
Jun 29 15:07:03 olympus kernel: ivtv: Create DMA encoder PCM audio
stream: 0 x 4608 buffers (0KB total)
Jun 29 15:07:03 olympus kernel: ivtv: Registered v4l2 device for
encoder radio minor 64
Jun 29 15:07:03 olympus kernel: ivtv: Create encoder radio stream
Jun 29 15:07:03 olympus kernel: ivtv: Registered v4l2 device for
decoder MPEG minor 16
Jun 29 15:07:03 olympus kernel: ivtv: Create DMA decoder MPEG stream:
0 x 65536 buffers (0KB total)
Jun 29 15:07:03 olympus kernel: ivtv: Registered v4l2 device for
decoder VBI minor 228
Jun 29 15:07:03 olympus kernel: ivtv: Create DMA decoder VBI stream: 0
x 2048 buffers (0KB total)
Jun 29 15:07:03 olympus kernel: ivtv: Registered v4l2 device for
decoder VOUT minor 232
Jun 29 15:07:03 olympus kernel: ivtv: Create decoder VOUT stream
Jun 29 15:07:03 olympus kernel: ivtv: Registered v4l2 device for
decoder YUV minor 48
Jun 29 15:07:03 olympus kernel: ivtv: Create DMA decoder YUV stream: 0
x 51840 buffers (0KB total)
Jun 29 15:07:03 olympus kernel: ivtv: Create DMA decoder OSD stream: 0
x 65536 buffers (0KB total)
Jun 29 15:07:03 olympus kernel: saa7115: decoder set norm PAL
Jun 29 15:07:03 olympus kernel: saa7115: set audio: 0x01
Jun 29 15:07:03 olympus kernel: saa7115: decoder set input (4)
Jun 29 15:07:03 olympus kernel: saa7115: now setting Composite input
Jun 29 15:07:03 olympus kernel: ivtv: Setting audio matrix to input 3, output 1
Jun 29 15:07:03 olympus kernel: ivtv: i2c client addr: 0x40 not found
for command 0x40086d11!
Jun 29 15:07:03 olympus kernel: ivtv: i2c client addr: 0x40 not found
for command 0x80287610!
Jun 29 15:07:03 olympus kernel: ivtv: i2c client addr: 0x40 not found
for command 0x40287611!
Jun 29 15:07:03 olympus kernel: ivtv: Switching standard to PAL.
Jun 29 15:07:03 olympus kernel: ivtv: i2c client addr: 0x40 not found
for command 0x40307603!
Jun 29 15:07:03 olympus kernel: saa7115: decoder set norm PAL
Jun 29 15:07:04 olympus kernel: saa7115: set audio: 0x01
Jun 29 15:07:04 olympus kernel: saa7127: Setting Encoder Video Standard
Jun 29 15:07:04 olympus kernel: saa7127: Set PAL Video Mode
Jun 29 15:07:04 olympus kernel: saa7127: Selecting PAL video Standard
Jun 29 15:07:04 olympus kernel: ivtv: Initialized WinTV PVR 350, card #0
Jun 29 15:07:04 olympus kernel: ivtv: ====================  END INIT
IVTV  ====================


-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel






-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to