Hi-
I've got a nforce2 based computer with a pvr-350 and pvr-500mce in it
running FC3 and mythtv 0.18.1. Using tv-out of 350 and ivtv 0.3.6r
All seems stable except when I try to watch live tv after the machine
has been running a while. Might be after I've recorded on one or both
of the pvr-500 tuners, and then try to use it again for live tv (say
the 350 was busy recording something...) The first time I try to
watch live tv- I'll get a freeze, but I can usually escape back to
mythtv. The 2nd time seems to kill the backend.
Following are the log from the crash and after that I've copied the ivtv setup.
Suggestions? Thanks --Mike
---------------------------------------------------------------------------------------------------------
Log file from an attempt to watch live tv and then a 2nd attempt that
kills everything.
ivtv: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
mythfrontend: page allocation failure. order:4, mode:0xd0
[<c014fe6f>] __alloc_pages+0x2fc/0x3b8
[<c015366b>] kmem_getpages+0x2a/0x77
[<c0154595>] cache_grow+0xd6/0x2fe
[<c013c4ae>] autoremove_wake_function+0x15/0x37
[<c0154a1e>] cache_alloc_refill+0x261/0x319
[<c0154e74>] __kmalloc+0x6b/0x7e
[<e0e45d2a>] ivtv_init_buffer+0x2d/0x158 [ivtv]
[<e0e45e7f>] ivtv_init_queue_nolock+0x2a/0x80 [ivtv]
[<e0e45f0a>] ivtv_init_queues_nolock+0x35/0x55 [ivtv]
[<e0e47cf0>] ivtv_stream_alloc+0x130/0x214 [ivtv]
[<e0e4abd3>] ivtv_claim_stream+0xe3/0x215 [ivtv]
[<e0e4c825>] ivtv_v4l2_write+0x85/0x142 [ivtv]
[<c0174045>] vfs_write+0xaf/0x10a
[<c017414b>] sys_write+0x41/0x6a
[<c0103903>] syscall_call+0x7/0xb
ivtv: No memory on buffer alloc!
ivtv: Buffer alloc failed!
ivtv: Couldn't allocate buffers for decoder MPEG stream
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder set picture bright=127 contrast=63 saturation=63 hue=0
cx25840: decoder set size 720x480 (from 720x487) -> scale 0x0, filter 0
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 24 sz 1456
ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x00000140
cx25840: decoder disable output
cx25840: decoder enable output
cx25840: decoder set norm NTSC
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv: Decoder VBI RE-Insert start 0x0019ac00 size 0x0000be00 type 0
attempt to access beyond end of device
hdb2: rw=0, want=37967221832328, limit=386218665
I/O error in filesystem ("hdb2") meta-data dev hdb2 block
0x2287eec53a81 ("xfs_trans_read_buf") error 5 buf count 512
xfs_force_shutdown(hdb2,0x1) called from line 4073 of file
fs/xfs/xfs_bmap.c. Return address = 0xe43991b4
Filesystem "hdb2": I/O Error Detected. Shutting down filesystem: hdb2
Please umount the filesystem, and rectify the problem(s)
[EMAIL PROTECTED] X11]$
-----------------------------------------------------------------------------------------------
and the ivtv initialization:
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.6 (r) loading
ivtv: Linux version: 2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 7520207
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
0x00ad1598, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Jun 24 2005 15:24:53
ivtv: i2c attach [client=MSP3448W-A2,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Registered v4l2 device for decoder MPEG minor 16
ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VBI minor 228
ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VOUT minor 232
ivtv: Create decoder VOUT stream
ivtv: Registered v4l2 device for decoder YUV minor 48
ivtv: Create DMA decoder YUV stream: 0 x 43200 buffers (0KB total)
ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
ivtv: Setting Tuner 47
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
spurious 8259A interrupt: IRQ7.
ivtv: Switching standard to NTSC.
ivtv: ivtv_enc_thread: pid = 2168, itv = 0xe0e72c20
ivtv: ivtv_enc_vbi_thread: pid = 2169, itv = 0xe0e72c20
ivtv: ivtv_dec_thread: pid = 2170, itv = 0xe0e72c20
ivtv: ivtv_dec_vbi_thread: pid = 2171, itv = 0xe0e72c20
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set NTSC Video Mode
saa7127: Selecting NTSC video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 9 (level, low) -> IRQ 9
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7855692
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
saa7127: detecting saa7127 client on address 0x88
saa7127: saa7127 client id: saa7127_i2c_id 1, skipped
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model
0x00914652, Revision 0x00000000
ivtv: Radio detected
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: cx25843-23 found. Initializing...
cx25840: requesting /lib/modules/HcwMakoA.ROM
cx25840: firmware loaded
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 1
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 33
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 225
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 25
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 65
ivtv: Create encoder radio stream
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1
cx25840: decoder set norm NTSC
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to NTSC.
cx25840: decoder set norm NTSC
ivtv: Initialized WinTV PVR 150, card #1
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: ivtv_enc_thread: pid = 2319, itv = 0xe0e961c0
ivtv: ivtv_enc_vbi_thread: pid = 2320, itv = 0xe0e961c0
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7855692
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005)
saa7127: detecting saa7127 client on address 0x88
saa7127: saa7127 client id: saa7127_i2c_id 2, skipped
cx25840: starting probe for adapter ivtv i2c driver #2 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: cx25843-23 found. Initializing...
cx25840: requesting /lib/modules/HcwMakoA.ROM
cx25840: firmware loaded
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model
0x00914652, Revision 0x00000000
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 2
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 34
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 226
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 26
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 66
ivtv: Create encoder radio stream
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2
cx25840: decoder set norm NTSC
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to NTSC.
cx25840: decoder set norm NTSC
ivtv: Initialized WinTV PVR 150, card #2
ivtv: ==================== END INIT IVTV ====================
ivtv: ivtv_enc_thread: pid = 2429, itv = 0xe0eb9760
ivtv: ivtv_enc_vbi_thread: pid = 2430, itv = 0xe0eb9760
lirc_dev: no version for "struct_module" found: kernel tainted.
lirc_dev: IR Remote Control driver registered, at major 61
bttv: disagrees about version of symbol tveeprom_read
bttv: Unknown symbol tveeprom_read
cx2388x v4l2 driver version 0.0.4 loaded
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv: i2c attach [client=Hauppauge IR,ok]
lirc_dev: lirc_register_plugin: sample_rate: 10
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and
has 1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 480]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xe1510000, mapped to 0xe1d90000, size 1350k
ivtv-osd: mode is 720x480x32, linelength=2880
ivtv-osd: fb1: iTVC15 TV out frame buffer device
ivtv: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total)
saa7115: starting probe for adapter SMBus nForce2 adapter at 5000 (0x0)
i2c_adapter i2c-3: nForce2 SMBus adapter at 0x5000
saa7115: starting probe for adapter SMBus nForce2 adapter at 5100 (0x0)
i2c_adapter i2c-4: nForce2 SMBus adapter at 0x5100
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem 0xee104000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 5, pci mem 0xee102000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 11, pci mem 0xee103000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03cc360(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
EXT3 FS on hda6, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED]
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem hdb2
Starting XFS recovery on filesystem: hdb2 (dev: hdb2)
Ending XFS recovery on filesystem: hdb2 (dev: hdb2)
Adding 2249060k swap on /dev/hdb1. Priority:-1 extents:1
eth0: no IPv6 routers present
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
