Grumble, grumble. Hi All, I have a 500MCE that I'm trying to get to work. I've been trying the various suggestions posted in other threads on 500MCE static without any success. My system (FC3) recognizes the card as two 150's, but when I cat the /dev/video0|1 all I get is static. I've been faithfully following Myth(TV)ology and now I'm at the point where I set up the cards at the terminal and that's where I'm stuck. I've also changed from 0 to 7, with only 6 and 7 giving me static and the rest as black screens. I've also changed the channel using the Ptune-ui.
Here's my START INIT: Jul 1 23:31:51 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Jul 1 23:31:51 localhost kernel: ivtv: version 0.3.5 (l) loading Jul 1 23:31:51 localhost kernel: ivtv: Linux version: 2.6.11-1.27_FC3smp SMP 686 REGPARM 4KSTACKS gcc-3.4 Jul 1 23:31:51 localhost kernel: ivtv: In case of problems please include the debug info Jul 1 23:31:51 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Jul 1 23:31:51 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Jul 1 23:31:51 localhost kernel: ivtv: Autodetected WinTV PVR 150 card Jul 1 23:31:51 localhost kernel: ivtv: Found an iTVC16 based chip Jul 1 23:31:51 localhost kernel: ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 19 (level, low) -> IRQ 201 Jul 1 23:31:51 localhost kernel: ivtv: XXX PCI device: 0x2578 vendor: 0x8086 Jul 1 23:31:51 localhost kernel: tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2995100 Jul 1 23:31:51 localhost kernel: tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) Jul 1 23:31:51 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Jul 1 23:31:51 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jul 1 23:31:51 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jul 1 23:31:51 localhost kernel: ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00915652, Revision 0x00000000 Jul 1 23:31:51 localhost kernel: ivtv: Radio detected Jul 1 23:31:51 localhost kernel: tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 Jul 1 23:31:51 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Jul 1 23:31:51 localhost kernel: i2c_adapter i2c-0: I2C level transfers not supported Jul 1 23:31:52 localhost last message repeated 323 times Jul 1 23:31:52 localhost kernel: cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'. Jul 1 23:31:52 localhost kernel: i2c_adapter i2c-0: I2C level transfers not supported Jul 1 23:31:52 localhost last message repeated 5 times Jul 1 23:31:52 localhost kernel: cx25840: Failed to load any FW image file Jul 1 23:31:52 localhost kernel: i2c_adapter i2c-0: I2C level transfers not supported Jul 1 23:31:52 localhost last message repeated 16 times Jul 1 23:31:52 localhost kernel: cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'. Jul 1 23:31:52 localhost kernel: cx25840: Failed to load any FW image file Jul 1 23:31:52 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] Jul 1 23:31:52 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] Jul 1 23:31:53 localhost kernel: ivtv: Encoder revision: 0x02040024 Jul 1 23:31:53 localhost kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jul 1 23:31:53 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0 Jul 1 23:31:53 localhost kernel: ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32 Jul 1 23:31:53 localhost kernel: ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224 Jul 1 23:31:53 localhost kernel: ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24 Jul 1 23:31:53 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64 Jul 1 23:31:53 localhost kernel: ivtv: Create stream 4 Jul 1 23:31:53 localhost kernel: ivtv: Setting Tuner 57 Jul 1 23:31:53 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 5166, itv = 0xf8b9b8a0 Jul 1 23:31:53 localhost kernel: ivtv: ivtv_enc_thread: pid = 5162, itv = 0xf8b9b8a0 Jul 1 23:31:53 localhost kernel: ivtv: Switching standard to NTSC. Jul 1 23:31:53 localhost kernel: tuner: tuner type not set Jul 1 23:31:53 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 Jul 1 23:31:53 localhost kernel: ivtv: Autodetected WinTV PVR 150 card Jul 1 23:31:53 localhost kernel: ivtv: Found an iTVC16 based chip Jul 1 23:31:53 localhost kernel: ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 18 (level, low) -> IRQ 169 Jul 1 23:31:53 localhost kernel: ivtv: XXX PCI device: 0x2578 vendor: 0x8086 Jul 1 23:31:53 localhost kernel: tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2995100 Jul 1 23:31:53 localhost kernel: tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) Jul 1 23:31:53 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Jul 1 23:31:53 localhost kernel: tveeprom: audio_processor = MSP3410D (type = 5) Jul 1 23:31:53 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] Jul 1 23:31:53 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 Jul 1 23:31:53 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Jul 1 23:31:53 localhost kernel: cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'. Jul 1 23:31:53 localhost kernel: cx25840: Failed to load any FW image file Jul 1 23:31:53 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] Jul 1 23:31:53 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] Jul 1 23:31:53 localhost kernel: ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00915652, Revision 0x00000000 Jul 1 23:31:53 localhost kernel: ivtv: Radio detected Jul 1 23:31:54 localhost kernel: ivtv: Encoder revision: 0x02040024 Jul 1 23:31:54 localhost kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jul 1 23:31:54 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 1 Jul 1 23:31:54 localhost kernel: ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 33 Jul 1 23:31:54 localhost kernel: ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 225 Jul 1 23:31:54 localhost kernel: ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 25 Jul 1 23:31:54 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 65 Jul 1 23:31:54 localhost kernel: ivtv: Create stream 4 Jul 1 23:31:54 localhost kernel: ivtv: Setting Tuner 57 Jul 1 23:31:54 localhost kernel: ivtv: ivtv_enc_thread: pid = 5266, itv = 0xf8bbebf0 Jul 1 23:31:54 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 5267, itv = 0xf8bbebf0 Jul 1 23:31:54 localhost kernel: ivtv: Switching standard to NTSC. Jul 1 23:31:54 localhost kernel: tuner: tuner type not set Jul 1 23:31:54 localhost kernel: ivtv: Initialized WinTV PVR 150, card #1 Jul 1 23:31:54 localhost kernel: ivtv: ==================== END INIT IVTV ==================== Thanks, Ben ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
