ivtv-0.3.6u works fine for me (some of the other versions won't work for
me).
Regards
Sigurd
John Clabaugh wrote:
I just purchased a PVR500 rev. D492 tuner to replace my PVR250. I
updated ivtv to 0.3.5l from atrpms and things are going well except I
don't get any audio on the second tuner. I've done some searching and
I have seen this issue hinted at, but I haven't seen a solution.
Anyhow, here is my dmesg:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.5 (l) loading
ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: XXX PCI device: 0x1130 vendor: 0x8086
tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023936
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model
0x00914652, Revision 0x00000000
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: Unknown parameter `no_black_magic'
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded.
cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395
cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0
cx25840: decoder set norm NTSC
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: ivtv_enc_thread: pid = 5803, itv = 0xe0c1af20
ivtv: ivtv_enc_vbi_thread: pid = 5804, itv = 0xe0c1af20
ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: XXX PCI device: 0x1130 vendor: 0x8086
tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023936
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded.
cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395
cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model
0x00914652, Revision 0x00000000
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create stream 4
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1
cx25840: decoder set norm NTSC
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV ====================
modprobe.conf:
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias char-major-81-2 off
alias char-major-81-3 off
alias tveeprom tveeprom-ivtv
alias msp3400 msp3400-ivtv
alias tuner tuner-ivtv
alias tda9887 tda9887-ivtv
options cx25840 no_black_magic=1 audiofmt=0x04
options ivtv tda9887=0,0 ivtv_debug=1,1
Let me know if I need to provide any additional info. Thanks for
spending the time to develop and support these drivers!
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
