Yesterday I have been trying to ivtv-0.3.7h driver to see if I could get the FM-tuner to work. It seems to do something, but I was unable to tune to a station. There is a lot of noise and static that varies with the selected frequency though...
I also have a system with a pvr350, if I plug the antenna cable in the 350 instead of in the 250, the 350 is able to tune without problems. This indicates that it is no signal or cable problem. The tuner type on my 250 is: Microtune 4049 FM5 (idx = 52, type = 45). Below is the ivtv dmesg output. The TV part is working OK, no problem. Can anybody help solving this? Leo. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (h) loading ivtv: Linux version: 2.6.8-1-686 preempt 686 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card (iTVC16 based) ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 18 (level, low) -> IRQ 217 ivtv: Unreasonably low latency timer, setting to 64 (was 32) msp34xx: ivtv version msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Aug 23 2005 21:03:44 ivtv: i2c attach to card #0 ok [client=MSP3418W-B3, addr=40] ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] tveeprom: Ignoring new-style parameters in presence of obsolete ones tveeprom: Hauppauge: model = 32559, rev = B152, serial# = 7307116 tveeprom: tuner = Microtune 4049 FM5 (idx = 52, type = 45) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = MSP4418 (type = 19) tveeprom: decoder processor = SAA7115 (type = 13) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Create encoder radio stream tuner: type set to 45 (Microtune 4049 FM5) by ivtv i2c driver #0 tda9885/6/7: switching to v4l2 tda9885/6/7: configure for: PAL-BG tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09 tda9885/6/7: write: byte B 0xd4 B0 video mode : sound trap B1 auto mute fm : no B2 carrier mode : QSS B3-4 tv sound/radio : FM/TV B5 force mute audio: no B6 output port 1 : high (inactive) B7 output port 2 : high (inactive) tda9885/6/7: write: byte C 0x70 C0-4 top adjustment : 0 dB C5-6 de-emphasis : 50 C7 audio gain : 0 tda9885/6/7: write: byte E 0x09 E0-1 sound carrier : 5.5 MHz E6 l pll ganting : 13 E2-4 video if : 38.9 MHz E2-4 video if : 38.9 MHz E5 tuner gain : normal E7 vif agc output : pin3+pin22 port -- ivtv: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
