Hi,
yeah I got this problem too when I installed ivtv 0.3.7k. (used 0.3.7a before)
0.3.7k & PVR-150
Erik
On 8/27/05, Morten Rønseth <[EMAIL PROTECTED]> wrote:
Hi,
I still get the occasional horisontal white line across screen with 0.3.7j.
I'll try my recently installed 0.3.7k later today.
Cheers,
-Morten
Morten Rønseth wrote:
> Hi,
>
> 0.3.7g gives me random horisontal white line, which consists of square
> blocks of varying heights. This "line" is only visible occasionally,
> but often enough to be annoying.
> Still no sound on any of the 500 tuners...
> BTW, mythtv is latest from cvs (or rather, svn).
>
>
> PVR 150 + pvr 500, Mandrake 10.2
>
>
> Cheers,
>
>
> -Morten
>
>
> dmesg:
>
> kernel: ivtv: ==================== START INIT IVTV ====================
> kernel: ivtv: version 0.3.7 (g) loading
> kernel: ivtv: Linux version: 2.6.11-6mdk 686 gcc-3.4
> kernel: ivtv: In case of problems please include the debug info
> kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
> kernel: ivtv: mailing the ivtv-devel mailinglist.
> kernel: ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
> kernel: tda9885/6/7: chip found @ 0x86
> kernel: ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
> kernel: tveeprom: Hauppauge: model = 26559, rev = C257, serial# = 7607292
> kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
> kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K)
> (eeprom = 0x74, v4l2 = 0x00400e17)
> kernel: tveeprom: audio_processor = MSP3410D (type = 5)
> kernel: ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
> kernel: tuner: Ignoring new-style parameters in presence of obsolete ones
> kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> kernel: ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> kernel: cx25840: firmware /lib/modules/HcwMakoA.ROM loaded
> kernel: ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44]
> kernel: ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b]
> kernel: ivtv: Encoder revision: 0x02050032
> kernel: ivtv warning: Encoder Firmware can be buggy, use version
> 0x02040011!!!!
> kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB
> total)
> kernel: ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB
> total)
> kernel: ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB
> total)
> kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers
> (0KB total)
> kernel: ivtv: Create encoder radio stream
> kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
> by ivtv i2c driver #0
> kernel: ivtv: Initialized WinTV PVR 150, card #0
> kernel: ivtv: ====================== NEXT CARD ======================
> kernel: ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
> kernel: tda9885/6/7: chip found @ 0x86
> kernel: ivtv: i2c attach to card #1 ok [client=tda9887, addr=43]
> kernel: tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8201697
> kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
> kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K)
> (eeprom = 0x74, v4l2 = 0x00400e17)
> kernel: tveeprom: audio_processor = MSP3410D (type = 5)
> kernel: ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50]
> kernel: tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #1
> kernel: TEA5767 detected.
> kernel: ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=60]
> kernel: tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
> kernel: type set to 62 (Philips TEA5767HN FM Radio)
> kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
> kernel: ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
> kernel: cx25840: firmware /lib/modules/HcwMakoA.ROM loaded
> kernel: ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44]
> kernel: ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b]
> kernel: ivtv: Detected a TEA5767 radio tuner. Enabling radio support.
> kernel: ivtv: Encoder revision: 0x02050032
> kernel: ivtv warning: Encoder Firmware can be buggy, use version
> 0x02040011!!!!
> kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB
> total)
> kernel: ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB
> total)
> kernel: ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB
> total)
> kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers
> (0KB total)
> kernel: ivtv: Create encoder radio stream
> kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME
> MK4)) by ivtv i2c driver #1
> kernel: ivtv: Initialized WinTV PVR 150, card #1
> kernel: ivtv: ====================== NEXT CARD ======================
> kernel: ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
> kernel: tda9885/6/7: chip found @ 0x86
> kernel: ivtv: i2c attach to card #2 ok [client=tda9887, addr=43]
> kernel: tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8201697
> kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
> kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K)
> (eeprom = 0x74, v4l2 = 0x00400e17)
> kernel: tveeprom: audio_processor = MSP3410D (type = 5)
> kernel: ivtv: i2c attach to card #2 ok [client=tveeprom[50], addr=50]
> kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2
> kernel: ivtv: i2c attach to card #2 ok [client=(tuner unset), addr=61]
> kernel: cx25840: firmware /lib/modules/HcwMakoA.ROM loaded
> kernel: ivtv: i2c attach to card #2 ok [client=cx25840[50], addr=44]
> kernel: ivtv: i2c attach to card #2 ok [client=wm8775[50], addr=1b]
> kernel: ivtv: Encoder revision: 0x02050032
> kernel: ivtv warning: Encoder Firmware can be buggy, use version
> 0x02040011!!!!
> kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB
> total)
> kernel: ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB
> total)
> kernel: ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB
> total)
> kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers
> (0KB total)
> kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME
> MK4)) by ivtv i2c driver #2
> kernel: ivtv: Initialized WinTV PVR 150, card #2
> kernel: ivtv: ==================== END INIT IVTV ====================
>
--
-------------------------------------------------------------------
WEB-fx http://www.webfx.no
Morten Lerskau Rønseth mailto:[EMAIL PROTECTED]
Odinsvei 15c +47 6680 9191
1413 Tårnåsen +47 9343 4357
Norway
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
