Sep 3 21:53:13 localhost kernel: ivtv: ==================== START INIT IVTV ====================
Sep 3 21:53:13 localhost kernel: ivtv: version 0.3.7 (k) loading
Sep 3 21:53:13 localhost kernel: ivtv: Linux version: 2.6.11-1-686 686 gcc-3.3
Sep 3 21:53:13 localhost kernel: ivtv: In case of problems please include the debug info
Sep 3 21:53:13 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Sep 3 21:53:13 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Sep 3 21:53:13 localhost kernel: ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
Sep 3 21:53:13 localhost kernel: ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Sep 3 21:53:13 localhost kernel: ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 18 (level, high) -> IRQ 201
Sep 3 21:53:13 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32)
Sep 3 21:53:13 localhost kernel: tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7893450
Sep 3 21:53:13 localhost kernel: tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
Sep 3 21:53:13 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Sep 3 21:53:13 localhost kernel: tveeprom: audio processor = CX25843 (type = 25)
Sep 3 21:53:13 localhost kernel: tveeprom: decoder processor = CX25843 (type = 1e)
Sep 3 21:53:13 localhost kernel: ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
Sep 3 21:53:13 localhost kernel: ivtv: This is the first unit of a PVR500
Sep 3 21:53:13 localhost kernel: tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
Sep 3 21:53:13 localhost kernel: TEA5767 detected.
Sep 3 21:53:13 localhost kernel: ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60]
Sep 3 21:53:13 localhost kernel: tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
Sep 3 21:53:13 localhost kernel: type set to 62 (Philips TEA5767HN FM Radio)
Sep 3 21:53:13 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Sep 3 21:53:13 localhost kernel: ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Sep 3 21:53:13 localhost kernel: cx25840: firmware read failed
Sep 3 21:53:13 localhost kernel: ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44]
Sep 3 21:53:13 localhost kernel: ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b]
Sep 3 21:53:13 localhost kernel: ivtv: Detected a TEA5767 radio tuner. Enabling radio support.
Sep 3 21:53:14 localhost kernel: ivtv: requesting ivtv-fw-enc.bin from hotplug
Sep 3 21:53:14 localhost kernel: ivtv: firmware load failed
Sep 3 21:53:14 localhost kernel: ivtv warning: failed loading encoder firmware
Sep 3 21:53:14 localhost kernel: ivtv warning: Error loading firmware -3!
Sep 3 21:53:14 localhost kernel: ivtv: Error -3 initializing firmware.
Sep 3 21:53:14 localhost kernel: ivtv: Error -12 on initialization
Sep 3 21:53:14 localhost kernel: ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:02: 08.0 failed with error -12
Sep 3 21:53:14 localhost kernel: ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
Sep 3 21:53:14 localhost kernel: ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Sep 3 21:53:14 localhost kernel: ACPI: PCI interrupt 0000:02: 09.0[A] -> GSI 19 (level, high) -> IRQ 209
Sep 3 21:53:14 localhost kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32)
Sep 3 21:53:14 localhost kernel: tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7893450
Sep 3 21:53:14 localhost kernel: tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
Sep 3 21:53:14 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Sep 3 21:53:14 localhost kernel: tveeprom: audio processor = CX25843 (type = 25)
Sep 3 21:53:14 localhost kernel: tveeprom: decoder processor = CX25843 (type = 1e)
Sep 3 21:53:14 localhost kernel: ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
Sep 3 21:53:14 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Sep 3 21:53:14 localhost kernel: ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Sep 3 21:53:14 localhost kernel: cx25840: firmware read failed
Sep 3 21:53:14 localhost kernel: ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44]
Sep 3 21:53:14 localhost kernel: ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b]
Sep 3 21:53:14 localhost kernel: ivtv: This is the second unit of a PVR500
Sep 3 21:53:14 localhost kernel: ivtv: Correcting tveeprom data: no radio present on second tuner
Sep 3 21:53:15 localhost kernel: ivtv: requesting ivtv-fw-enc.bin from hotplug
Sep 3 21:53:15 localhost kernel: ivtv: firmware load failed
Sep 3 21:53:15 localhost kernel: ivtv warning: failed loading encoder firmware
Sep 3 21:53:15 localhost kernel: ivtv warning: Error loading firmware -3!
Sep 3 21:53:15 localhost kernel: ivtv: Error -3 initializing firmware.
Sep 3 21:53:15 localhost kernel: ivtv: Error -12 on initialization
Sep 3 21:53:15 localhost kernel: ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:02:09.0 failed with error -12
Sep 3 21:53:15 localhost kernel: ivtv: ==================== END INIT IVTV ====================
I've tried copying the firmware off the CD again into /lib/modules as per the writeme.ch wiki instructions, and I've also tried downloading the drivers and using ivtvfwextract.pl; both had identical results.
On 9/3/05, Tim Cluff <[EMAIL PROTECTED]> wrote:
>Do you have the kernel headers installed?
Not originally, but they were installed by the debian packages.
>Have you done a depmod -a ?
Yep.
I looked in /lib/modules and saw a 2.6.11/ folder I hadn't noticed before. In it was extras/ivtv.ko and the rest. I copied them over to the proper /lib/modules/2.6.11-1-686/ folder, did a depmod -a and a modprobe ivtv, and it worked.
Thank you for the help. Maybe now I can finally get MythTV working.On 9/3/05, Ross < [EMAIL PROTECTED] > wrote:On 9/4/05, Tim Cluff < [EMAIL PROTECTED] > wrote:
> make CONFIG_VIDEO_IVTV=m -C /lib/modules/2.6.11-1-686/build
> M=/usr/src/modules/ivtv0.3 modules
> make: *** /lib/modules/2.6.11-1-686
> /build: No such file or directory
> make: *** [all] Error 2
Do you have the kernel headers installed?
> Since I couldn't find anything about this error, I tried installing the
> debian packages as explained in the wiki. After figuring out the new names> for the sources.list and packages to install, it appeared to work fine.
> However, "modprobe ivtv" returned "FATAL: Module ivtv not found", and
> looking in
> /lib/modules/2.6.8.11-1-686/kernel/drivers/media/video I
> saw that ivtv.ko hadn't been added.
Have you done a depmod -a ?
The modules should be installed under /lib/modules/2.6.11-1/686/ivtv/
have a look there for ivtv.ko.
I also had a problem (I thought it was specific to sarge) with the
makefile putting the modules in /lib/modules/2.6.11/ivtv/, (missing
extraversion string) have a look around there too. Even better, do a
"find /lib/modules -name ivtv.ko" and see if there are any ivtv
modules at all.
Cheers,
Ross
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
