Hello all,
IVTV works perfectly for me if i modprobe it from the command line.
However autoloading from any init script in anyway breaks it!
I have tried putting it in:
/etc/modules.autoload/kernel-2.6
/etc/conf.d/local.start
and even as part of my mythbackend start script!
but with these i get a solid green video out with static and logs full of
> tuner: radio freq (0.00) out of range (65-108)
I just don't understand!
my /etc/modules.d/ivtv is: (gentoo equivalent of modules.conf)
>alias char-major-81 videodev
>alias char-major-81-0 ivtv
Currently i am using kernel 2.6.13, (but had identical issues with
2.6.11) all of the videodev & i2c is compiled as modules.
my card shares no interrupts, but i also have a nebula dvb (bttv &
dvb_bt8xx) card in there which continues to work regardless,
I am using 0.3.7k (but have tried 0.2.0-rc3j as well)
unsucessful loading:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (k) loading
ivtv: Linux version: 2.6.13-gentoo preempt K7 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card (iTVC15 based)
PCI: Found IRQ 7 for device 0000:00:0b.0
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Hauppauge: model = 48135, rev = J324, serial# = 7114291
tveeprom: tuner = Philips FM1246 (idx = 24, type = 1)
tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
tveeprom: audio processor = MSP4418 (type = 19)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler
(G) no-thread mode
msp34xx: $Id$ compiled on: Sep 3 2005 19:03:05
ivtv: i2c attach to card #0 ok [client=MSP3418W-A2, addr=40]
ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
ivtv: i2c attach to card #0 ok [client=saa7127[50], addr=44]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total)
ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total)
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Create encoder radio stream
ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
ivtv: Create decoder VOUT stream
ivtv: Create DMA decoder YUV stream: 0 x 51840 buffers (0KB total)
ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by ivtv i2c
driver #0
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
tuner: radio freq (0.00) out of range (65-108)
Sucessful loading
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (k) loading
ivtv: Linux version: 2.6.13-gentoo preempt K7 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card (iTVC15 based)
PCI: Found IRQ 7 for device 0000:00:0b.0
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Hauppauge: model = 48135, rev = J324, serial# = 7114291
tveeprom: tuner = Philips FM1246 (idx = 24, type = 1)
tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
tveeprom: audio processor = MSP4418 (type = 19)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21]
ivtv: i2c attach to card #0 ok [client=saa7127[50], addr=44]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler
(G) no-thread mode
msp34xx: $Id$ compiled on: Sep 3 2005 19:03:05
ivtv: i2c attach to card #0 ok [client=MSP3418W-A2, addr=40]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total)
ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total)
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Create encoder radio stream
ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
ivtv: Create decoder VOUT stream
ivtv: Create DMA decoder YUV stream: 0 x 51840 buffers (0KB total)
ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) by ivtv i2c
driver #0
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
my modules.autoload/kernel-2.6
nvidia
snd-via82xx
bttv
dvb_bt8xx
lirc_serial
> #ivtv
I get exactly the same problems if i remove all of the other autoloaded
modules have just _ivtv_ in there.
I presume the clue is in the
> tuner: radio freq (0.00) out of range (65-108)
that appears in my logs every time i try to mplayer /dev/video0, but
only when i autoload......
How can i investigate this further, any ideas?
Many thanks,
Robin Marlow
-=-=-
Sometimes I think the surest sign that intelligent life exists
elsewhere in the universe is that none of it has tried to contact us.
-- Calvin
-=-=-
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
