Hi, I tried installing svn revision 2637, but I get distorted blackish noise and crackling sound on both tuners - reverted back to 1286 and it works perfectly again.
Don't know if it helps, but here's my dmesg with that version: Sep 6 19:43:54 myth ivtv: ==================== START INIT IVTV ==================== Sep 6 19:43:54 myth ivtv: version 0.3.8 (svn snapshot revision 2637) loading Sep 6 19:43:54 myth ivtv: Linux version: 2.6.12-gentoo-r6 PENTIUM4 gcc-3.3 Sep 6 19:43:54 myth ivtv: In case of problems please include the debug info Sep 6 19:43:54 myth ivtv: between the START INIT IVTV and END INIT IVTV lines when Sep 6 19:43:54 myth ivtv: mailing the ivtv-devel mailinglist. Sep 6 19:43:54 myth ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) Sep 6 19:43:54 myth ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 18 Sep 6 19:43:54 myth tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990431 Sep 6 19:43:54 myth tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) Sep 6 19:43:54 myth tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Sep 6 19:43:54 myth tveeprom: audio processor = CX25843 (type = 25) Sep 6 19:43:54 myth tveeprom: decoder processor = CX25843 (type = 1e) Sep 6 19:43:54 myth ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] Sep 6 19:43:54 myth ivtv: This is the first unit of a PVR500 Sep 6 19:43:54 myth tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 Sep 6 19:43:54 myth TEA5767 detected. Sep 6 19:43:54 myth ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60] Sep 6 19:43:54 myth tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect Sep 6 19:43:54 myth type set to 62 (Philips TEA5767HN FM Radio) Sep 6 19:43:54 myth tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Sep 6 19:43:54 myth ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] Sep 6 19:43:54 myth cx25840: loading /lib/modules/HcwMakoA.ROM Sep 6 19:43:55 myth ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44] Sep 6 19:43:55 myth ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b] Sep 6 19:43:55 myth ivtv: Detected a TEA5767 radio tuner. Enabling radio support. Sep 6 19:43:56 myth ivtv: loading /lib/modules/ivtv-fw-enc.bin Sep 6 19:43:56 myth ivtv: Encoder revision: 0x02050032 Sep 6 19:43:56 myth ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! Sep 6 19:43:56 myth ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Sep 6 19:43:56 myth ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) Sep 6 19:43:56 myth ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) Sep 6 19:43:56 myth ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Sep 6 19:43:57 myth ivtv: Create encoder radio stream Sep 6 19:43:57 myth tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 Sep 6 19:43:57 myth ivtv: Initialized WinTV PVR 500 (unit #1), card #0 Sep 6 19:43:57 myth ivtv: ====================== NEXT CARD ====================== Sep 6 19:43:57 myth ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) Sep 6 19:43:57 myth ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 19 (level, low) -> IRQ 19 Sep 6 19:43:57 myth tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990431 Sep 6 19:43:57 myth tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) Sep 6 19:43:57 myth tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Sep 6 19:43:57 myth tveeprom: audio processor = CX25843 (type = 25) Sep 6 19:43:57 myth tveeprom: decoder processor = CX25843 (type = 1e) Sep 6 19:43:57 myth ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50] Sep 6 19:43:57 myth tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 Sep 6 19:43:57 myth ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] Sep 6 19:43:57 myth cx25840: loading /lib/modules/HcwMakoA.ROM Sep 6 19:43:59 myth ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44] Sep 6 19:43:59 myth ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b] Sep 6 19:43:59 myth ivtv: This is the second unit of a PVR500 Sep 6 19:43:59 myth ivtv: Correcting tveeprom data: no radio present on second unit Sep 6 19:43:59 myth ivtv: loading /lib/modules/ivtv-fw-enc.bin Sep 6 19:43:59 myth ivtv: Encoder revision: 0x02050032 Sep 6 19:43:59 myth ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! Sep 6 19:43:59 myth ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Sep 6 19:43:59 myth ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) Sep 6 19:43:59 myth ivtv: Create DMA encoder VBI stream: 0 x 26208 buffers (0KB total) Sep 6 19:44:00 myth ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Sep 6 19:44:00 myth tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 Sep 6 19:44:00 myth ivtv: Initialized WinTV PVR 500 (unit #2), card #1 Sep 6 19:44:00 myth ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
