Hi All, Sound on Tuner 0 of the first 500, no sound on Tuner 1 or either set of tuners on the second 500. Video is fine on all tuners.
Not so important for the WAF, but the 2.5 year old doesn't understand Teletubbies without sound. :) Cheers, -P [EMAIL PROTECTED]:/etc> uname -a Linux k8ne 2.6.11.4-21.8-default #1 Tue Jul 19 12:42:37 UTC 2005 x86_64 x86_64 x86_64 GNU/Linux Linux video capture interface: v1.00 ivtv: module not supported by Novell, setting U taint flag. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.9 (development snapshot compiled on Thu Sep 15 22:32:39 2005) loading ivtv: Linux version: 2.6.11.4-21.8-default gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 17 (level, low) -> IRQ 217 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990514 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] ivtv: This is the first unit of a PVR500 tuner: module not supported by Novell, setting U taint flag. tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: module not supported by Novell, setting U taint flag. cx25840: Ignoring new-style parameters in presence of obsolete ones cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408 cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84 ivtv: i2c attach to card #0 ok [client=cx25840[0], addr=44] wm8775: module not supported by Novell, setting U taint flag. ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9887: module not supported by Novell, setting U taint flag. tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv: Detected a TEA5767 radio tuner. Enabling radio support. r8169: eth0: link up ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02040011 ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Create encoder radio stream tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 cx25840: *** I2C Write to no cx25840 device 0x43. ivtv: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 19 (level, low) -> IRQ 185 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990514 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408 cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84 ivtv: i2c attach to card #1 ok [client=cx25840[1], addr=44] ivtv: i2c attach to card #1 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv: This is the second unit of a PVR500 ivtv: Correcting tveeprom data: no radio present on second unit ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02040011 ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 cx25840: *** I2C Write to no cx25840 device 0x43. ivtv: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ====================== NEXT CARD ====================== ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI interrupt 0000:04:08.0[A] -> GSI 19 (level, low) -> IRQ 185 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2991352 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #2 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #2 TEA5767 detected. ivtv: i2c attach to card #2 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 ivtv: i2c attach to card #2 ok [client=(tuner unset), addr=61] cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408 cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84 ivtv: i2c attach to card #2 ok [client=cx25840[2], addr=44] ivtv: i2c attach to card #2 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #2 ok [client=tda9887, addr=43] ivtv: This is the first unit of a PVR500 ivtv: Detected a TEA5767 radio tuner. Enabling radio support. ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02040011 ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Create encoder radio stream tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #2 cx25840: *** I2C Write to no cx25840 device 0x43. ivtv: Initialized WinTV PVR 500 (unit #1), card #2 ivtv: ====================== NEXT CARD ====================== ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16 ACPI: PCI interrupt 0000:04:09.0[A] -> GSI 16 (level, low) -> IRQ 225 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2991352 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #3 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #3 ivtv: i2c attach to card #3 ok [client=(tuner unset), addr=61] cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408 cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84 ivtv: i2c attach to card #3 ok [client=cx25840[3], addr=44] ivtv: i2c attach to card #3 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #3 ok [client=tda9887, addr=43] ivtv: This is the second unit of a PVR500 ivtv: Correcting tveeprom data: no radio present on second unit ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02040011 ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #3 cx25840: *** I2C Write to no cx25840 device 0x43. ivtv: Initialized WinTV PVR 500 (unit #2), card #3 ivtv: ==================== END INIT IVTV ==================== Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 bootsplash: status on console 0 changed to on NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80406260(lo) IPv6 over IPv4 tunneling driver Disabled Privacy Extensions on device ffff81002e248800(sit0) ACPI: Power Button (FF) [PWRF] ivtvctl -d /dev/video0 --audio-status --video-status cx25840: Decoder set size 720x576 (from 720x576) -> scale 0x65536, filter 0 cx25840: *** I2C Write to no cx25840 device 0x43. cx25840: invalid hue setting -32512 cx25840: invalid hue setting -32512 cx25840: invalid hue setting -32512 cx25840: *** I2C Write to no cx25840 device 0x43. cx25840: Decoder set size 720x576 (from 720x576) -> scale 0x65536, filter 0 cx25840: *** I2C Write to no cx25840 device 0x43. wm8775: Register R7=000 wm8775: Register R11=021 wm8775: Register R12=102 wm8775: Register R13=04b wm8775: Register R14=0cf wm8775: Register R15=0cf wm8775: Register R16=07b wm8775: Register R17=000 wm8775: Register R18=082 wm8775: Register R19=001 wm8775: Register R20=0a6 wm8775: Register R21=101 wm8775: Register R23=000 Peter Greis Zurich Switzerland +++ Be careful replying... the real address is "peter_greis[at]yahoo[dot]com" +++ __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
