> I have a strange problem with a PVR-350: > When I plug the audio-out from the PVR-350 in e.g. a headset, I get the > audio of some strange TV- or Radio-channel.
You have to set the card to passthru mode I think to get audio out of this port, or be sending data to /dev/video16. See ivtvctl --passthrough > When I tune the card to another channel ... The audio stays the same > (also I can watch and hear the tuned channel). What do you mean by this? If you plug the cable int othe TV directly that it works? You can watch and hear the tuned channel where? > When I push a mpeg2 video to the pvr-output, I get the correct > video+audio on my TV - but the Audio via Audio-off stays the same > strange channel ... Not sure what you mean here.. If the video is going out through the pvr-350, and you hear the audio, then you must have the audio out plugged either directly into your TV or into your soundcard mic port then out from there into your TV... so the audio out must be working. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
