Hello all, I have been struggling with audio on my PVR 150 for quite some time now. I've tried many different versions of ivtv, but everything after 0.3.5l and I have no audio. I have another card, a bttv-based WinTV Go, that works just fine, so I know it isn't the audio output. I've tried "ivtvctl -q #" on all of the audio inputs as well. I've been searching the list archives, and I've seen a few posts about audio, but nothing that seems relevant. Sorry if I missed it :)
I am using atrpms to update my kernel, modules, and software, so typically I upgrade kernels when I upgrade driver versions, however I have tried newer versions with my old kernel and it still doesn't produce audio, so I'm fairly certain it isn't my kernel either. Here is my old output: (The ivtv version line got cut off, but it is 0.3.5 (l) in the log) ivtv: Linux version: 2.6.10-1.770_14.rhfc3.at 686 REGPARM gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3099 vendor: 0x1106 ivtv: i2c attach [client=tveeprom,ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tveeprom: Hauppauge: model = 26552, rev = C268, serial# = 7840859 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x008d2598, Revision 0xe0b0b18c ivtv: Radio detected cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Setting Tuner 47 tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 ivtv: ivtv_enc_thread: pid = 2583, itv = 0xe0af0c20 ivtv: ivtv_enc_vbi_thread: pid = 2584, itv = 0xe0af0c20 ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== And the new output: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.12-1.1378_FC3 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] tveeprom: Hauppauge: model = 26552, rev = C268, serial# = 7840859 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (13353 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: (ivtv) chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02040011 ivtv: ==================== END INIT IVTV ==================== Relevant lines from modprobe.conf: alias char-major-81 ivtv alias char-major-81-0 bttv alias char-major-81-1 ivtv alias tuner tuner-ivtv alias msp3400 msp3400-ivtv alias tda9887 tda9887-ivtv If there is anything else that would help, I'm more than happy to provide it. Thanks, Jonathan _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
