Hi,
I had a similar problem. When I copied the "encoder/ decoder"-bins to
"/lib/firmware" (not to /lib/modules what I found somewhere) loading the
firmware was no longer a problem. Maybe this helps.
Greetings
Thomas
Jean-Christophe Pirmolin schrieb:
Hello gentlemen,
I finaly succeeded in compiling IVTV drivers.
The problem was GCC version...
Now, I get a new problem.
It seams that encoder firmware makes problem.
I recreated it with the tool and checked md5sum from wiki.
Everything seams OK, but I still have this error in syslog while I do
modprobe ivtv
Nov 7 23:10:13 localhost kernel: ivtv: ==================== START
INIT IVTV ====================
Nov 7 23:10:13 localhost kernel: ivtv: version 0.4.0 (tagged
release) loading
Nov 7 23:10:13 localhost kernel: ivtv: Linux version: 2.6.8-2-386
preempt 386 gcc-3.3
Nov 7 23:10:13 localhost kernel: ivtv: In case of problems please
include the debug info
Nov 7 23:10:13 localhost kernel: ivtv: between the START INIT IVTV
and END INIT IVTV lines when
Nov 7 23:10:13 localhost kernel: ivtv: mailing the ivtv-devel
mailinglist.
Nov 7 23:10:13 localhost kernel: ivtv0: Autodetected WinTV PVR 350
card (iTVC15 based)
Nov 7 23:10:13 localhost kernel: ACPI: PCI interrupt 0000:00:06.0[A]
-> GSI 17 (level, low) -> IRQ 177
Nov 7 23:10:13 localhost kernel: tveeprom: ivtv version
Nov 7 23:10:13 localhost kernel: tveeprom: Hauppauge: model = 48134,
rev = J342, serial# = 7067220
Nov 7 23:10:13 localhost kernel: tveeprom: tuner = Temic 4009FR5 (idx
= 42, type = 20)
Nov 7 23:10:13 localhost kernel: tveeprom: tuner fmt = PAL(B/G)
(eeprom = 0x04, v4l2 = 0x00000007)
Nov 7 23:10:13 localhost kernel: tveeprom: audio processor = MSP4418
(type = 19)
Nov 7 23:10:13 localhost kernel: tveeprom: decoder processor =
SAA7115 (type = 13)
Nov 7 23:10:13 localhost kernel: ivtv0: i2c attach to card #0 ok
[client=tveeprom, addr=50]
Nov 7 23:10:13 localhost kernel: tuner (ivtv): chip found at addr
0xc2 i2c-bus ivtv i2c driver #0
Nov 7 23:10:13 localhost kernel: ivtv0: i2c attach to card #0 ok
[client=(tuner unset), addr=61]
Nov 7 23:10:13 localhost kernel: saa7115 0-0021: saa7115 found @ 0x42
(ivtv i2c driver #0)
Nov 7 23:10:13 localhost kernel: ivtv0: i2c attach to card #0 ok
[client=saa7115, addr=21]
Nov 7 23:10:13 localhost kernel: saa7127 0-0044: saa7127 found @ 0x88
(ivtv i2c driver #0)
Nov 7 23:10:13 localhost kernel: ivtv0: i2c attach to card #0 ok
[client=saa7127, addr=44]
Nov 7 23:10:13 localhost kernel: msp34xx: ivtv version
Nov 7 23:10:13 localhost kernel: msp34xx: init: chip=MSP3418W-A2, has
NICAM support, simple (D) mode, simpler (G) no-thread mode
Nov 7 23:10:13 localhost kernel: msp34xx: $Id$ compiled on: Nov 7
2005 21:37:30
Nov 7 23:10:13 localhost kernel: ivtv0: i2c attach to card #0 ok
[client=MSP3418W-A2, addr=40]
Nov 7 23:10:14 localhost kernel: ivtv0: requesting ivtv-fw-enc.bin
from hotplug
Nov 7 23:10:24 localhost kernel: ivtv0: unable to open firmware
Nov 7 23:10:24 localhost kernel: ivtv0 warning: failed loading
encoder firmware
Nov 7 23:10:24 localhost kernel: ivtv0 warning: Error loading
firmware -3!
Nov 7 23:10:24 localhost kernel: ivtv0: Error -3 initializing firmware.
Nov 7 23:10:24 localhost kernel: ivtv0: Error -12 on initialization
Nov 7 23:10:24 localhost kernel: ivtv-iTVC15_16_mpg2_encoder_card:
probe of 0000:00:06.0 failed with error -12
Nov 7 23:10:24 localhost kernel: ivtv: ==================== END
INIT IVTV ====================
Thanks in advance for your suggestions.
Best regards from Belgium,
Jean-Christophe
------------------------------------------------------------------------
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
