"Keith C wrote:" > > On Nov 7, 2005, at 11:31 PM, David Highley wrote: > > > Platform is Fedora core 4 2.6.13-1.1532_FC4smp. Read how to and > > trouble > > shooting pages on ivtv web site. Checked last two months of users > > mailing list. > > > > - yum install --enable atrpm > > perl-Video-ivtv-0.13-7.rhfc4.at > > ivtv-firmware-audio-0.0.1-1.at > > ivtv-kmdl-2.6.13-1.1532_FC4smp-0.4.0-98.rhfc4.at > > ivtv-firmware-dec-2.02.023-4.at > > ivtv-0.4.0-98.rhfc4.at > > ivtv-firmware-enc-2.04.024-4.at > > > > - depmod -a > > - modprobe ivtv > > - dmesg | less; squawks about eeprom possibly loading too soon > > Please include all the ivtv dmesg stuff. That stuff is really > important to finding the problem.
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.13-1.1532_FC4smp SMP gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 27 (level, low) -> IRQ 225 ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7967250 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv0: This is the first unit of a PVR500 : chip found @ 0xc0 (ivtv i2c driver #0) : TEA5767 detected. ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio) : chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 3-0044: loaded /lib/modules/HcwMakoA.ROM firmware (13353 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02040024 ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032. ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner 3-0061: type set to 57 (Philips FQ1236A MK4) ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 24 (level, low) -> IRQ 185 ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] : chip found @ 0xc2 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 4-0044: loaded /lib/modules/HcwMakoA.ROM firmware (13353 bytes) ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7967250 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: loading /lib/modules/ivtv-fw-enc.bin ivtv1: Encoder revision: 0x02040024 ivtv1 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032. ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 4-0061: type set to 57 (Philips FQ1236A MK4) ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== > > > - modprobe -r; all modules in ivtv-kmdl > > - modprobe ivtv > > - dmesg no squawks other than warnings about firmware being possible > > buggy > > - check /var/log/messages no squawks > > - ivtv-tune --channel=5 > > /dev/video0: 77.250 MHz > > - cat /dev/video0 >test.mpg > > - mplayer test.mpg; black video no audio no snow > > - xine test.mpg; same story > > - tvtime; ivtv: Invalid argument Cannot open capture device /dev/ > > video0 > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
