On Sun, 27 Nov 2005 15:47:43 +0100, "Xenna"
<[EMAIL PROTECTED]> said:
> 
> On Sun, 27 Nov 2005 15:11:51 +0100, "Hans Verkuil" <[EMAIL PROTECTED]>
> said:
> > On Sunday 20 November 2005 12:43, Xenna wrote:
> > >
> > > OK, I tried the following things:
> > > - I removed the power leads from 2 of the 3 harddisks. (this left
> > > just the Matrox video the 2 Hauppauge cards and the 250 GB SATA
> > > disk): No difference.
> > > - I replaced the Matrox AGP videocard with the ASUS AGP videocard
> > > from my GF's PC: No difference.
> > > - I swapped the Hauppauge cards around: No difference.
> > >
> > > So on with the i2c debugging. The ic2-algo-bit module had a debug
> > > option so I tried that:
> > >
> > > $ modprobe i2c-algo-bit i2c_debug=2
> > > $ modprobe i2c-dev
> > > $ modprobe videodev
> > > $ modprobe i2c-via
> > >
> > > $ insmod /tmp/ivtv.ko ivtv_debug=33
> > >
> > > http://pastebin.ru/1000
> > >
> > > I'm busy downloading KnoppMyth R5A22. I'll try and see if I get the
> > > same symptoms when I boot from the KnoppMyth CD. If so, I intend to
> > > put the 2 PVR cards in my GF's PC and boot with KnoppMyth also. See
> > > if I get the same problem. If so, the problem must be either with the
> > > cards or the ivtv/i2c drivers (I think).
> > 
> > Any news on this?
> 
> I'm glad you haven't forgotten me :)
> 
> The KnoppMyth CD wanted to reformat my GF's PC to run a backend so I
> abandoned that.
> 
> I've done the following things:
> 
> - I found someone offering a one year old PVR350 in my city and tried
> that in combination with my PVR500. Exactly the same problems.
> - I upgraded my Fedora kernel to 2.6.14 and compiled the latest 0.4
> version of IVTV. I must have broken something in the process because
> then everything started failing. My '500 only gave a signal on the
> second tuner and nothnig but static on the first one. My '350 stopped
> working altogether.
> 
> I veryfied that I hadn't fried my cards in the process by putting them
> in a windows PC and running them under WinTV. Both work well (although
> WinTV doesn't seem to use the second '500 tuner). Conclusion: my FC4
> install must be hosed.
> 
> This sunday I'm busy installing FC4 (that yum upgrade sure takes long)
> on my desktop (an older Dell gx260, 2.4 P4 CPU). If I get the cards to
> coexist properly on that system, I'll let you know and just start using
> that as a Myth server instead (and make a backup). If they don't work
> together, I'll reinstall my current server as well and go back to life
> with two tuners.
> 
> It seems you live close to my place of work (if you're still in C a/d
> IJ). If at some point you'd be interested in looking at the cards or
> system I could arrange that easily. ( all in the interest of ivtv
> perfection of course ;)

It works!

After completing the ivtv install and setting up the right firmware
version for the PVR500 I now have TV image and sound on all three
tuners. I haven't looked at the TV-Out and the IR input but I'm hopeful
that that will also be OK.

So now it seems to me that the most likely 'culprit' must be my "MSI K8N
Neo2 Platinum-54G,S939,nForce3 Ultra, GLAN" motherboard or maybe even
the AMD 64 CPU (not likely I hope). Something in the 2.6.13/14 kernels
or the ivtv driver must have problems in using this motherboard in
combination with both a PVR350 and a PVR500 while both cards work fine
when alone in the system. What do you think, Hans?

I'm still thinking whether to get a different 75 EURO Socket 939
motherboard to get my especially-bought-for-MythTV server up and running
or break down and just use the Dell as a server.

Regards,
Xenna

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to