Hey,
I have a pvr250 and wonder if the following output common when loading
lirc_i2c module?
lirc seems to work (lircd-0.8.0-CVS).
Last night my mythbox became unresponsive during a recording and
"*ivtv0* warning: *ENC Stream* 0 OVERFLOW #0: Stealing a Buffer" was
spewing to the console. Alot of my recordings seem to have skips in them
also.
Any Ideas?
spurious 8259A interrupt: IRQ7.
lirc_dev: IR Remote Control driver registered, at major 61
bttv: disagrees about version of symbol tveeprom_hauppauge_analog
bttv: Unknown symbol tveeprom_hauppauge_analog
cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog
cx88xx: Unknown symbol tveeprom_hauppauge_analog
cx8800: Unknown symbol cx88_reset
cx8800: Unknown symbol cx88_call_i2c_clients
cx8800: Unknown symbol cx88_wakeup
cx8800: Unknown symbol cx88_risc_stopper
cx8800: Unknown symbol cx88_print_irqbits
cx8800: Unknown symbol cx88_set_scale
cx8800: Unknown symbol cx88_shutdown
cx8800: Unknown symbol cx88_vdev_init
cx8800: Unknown symbol cx88_core_put
cx8800: Unknown symbol cx88_audio_thread
cx8800: Unknown symbol cx88_core_irq
cx8800: Unknown symbol cx88_core_get
cx8800: Unknown symbol cx88_get_stereo
cx8800: Unknown symbol cx88_set_tvnorm
cx8800: Unknown symbol cx88_risc_buffer
cx8800: Unknown symbol cx88_set_stereo
cx8800: Unknown symbol cx88_sram_channels
cx8800: Unknown symbol cx88_set_tvaudio
cx8800: Unknown symbol cx88_sram_channel_dump
cx8800: Unknown symbol cx88_sram_channel_setup
cx8800: Unknown symbol cx88_print_ioctl
cx8800: Unknown symbol cx88_free_buffer
cx8800: Unknown symbol cx88_boards
cx8800: Unknown symbol cx88_newstation
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv0: i2c attach to card #0 ok [client=Hauppauge IR, addr=18]
lirc_dev: lirc_register_plugin: sample_rate: 10
Relevant ivtv output:
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.0 (tagged release) loading
ivtv: Linux version: 2.6.14-1.1637_FC4 686 REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based)
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNK4] -> GSI 11 (level,
low) -> IRQ 11
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: ivtv version
tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 2868847
tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = MSP3445 (type = c)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
msp34xx: ivtv version
msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Nov 12 2005 07:01:23
ivtv0: i2c attach to card #0 ok [client=MSP3445G-B8, addr=40]
ivtv0: loading /lib/modules/ivtv-fw-enc.bin
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner 2-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
--
Allan
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
