Your version of Ivtv is quite old. You could try upgrading to stable
version 4.0. Is the firmware installed?
ls /lib/modules/ivtv-fw-enc.bin
Joel Webb wrote:
>I am running SuSE 10.0 with the default drivers that came with suse for ivtv.
>
>What does this error mean??
>
>
>ivtv: module not supported by Novell, setting U taint flag.
>ivtv: ==================== START INIT IVTV ====================
>ivtv: version 0.3.7 (c) loading
>ivtv: Linux version: 2.6.13-15.7-default 586 REGPARM gcc-4.0
>ivtv: In case of problems please include the debug info
>ivtv: between the START INIT IVTV and END INIT IVTV lines when
>ivtv: mailing the ivtv-devel mailinglist.
>ivtv: Autodetected WinTV PVR 350 card
>ivtv: Found an iTVC15 based chip
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) ->
>IRQ 10
>i2c-algo-bit.o: (0) scl=1, sda=1
>i2c-algo-bit.o: (1) scl=1, sda=0
>i2c-algo-bit.o: (2) scl=1, sda=1
>i2c-algo-bit.o: (3) scl=0, sda=1
>i2c-algo-bit.o: (4) scl=1, sda=1
>i2c-algo-bit.o: ivtv i2c driver #0 passed test.
>ivtv: i2c attach [client=tveeprom,ok]
> : chip found @ 0xc2 (ivtv i2c driver #0)
>ivtv: i2c attach [client=(tuner unset),ok]
>saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
>saa7115: detecting saa7115 client on address 0x42
>saa7115: writing init values
>ivtv: i2c attach [client=saa7115[50],ok]
>saa7115: status: (1E) 0x48, (1F) 0xc0
>saa7127: starting probe on adapter ivtv i2c driver #0 (0x10005)
>saa7127: detecting saa7127 client on address 0x88
>saa7127: Selecting NTSC video Standard
>saa7127: Selecting S-Video+Composite
>saa7127: Turn WSS off
>saa7127: Widescreen Mode 4:3 Full Format
>saa7127: Selecting Normal Encoder Input
>saa7127: Enable Video Output
>ivtv: i2c attach [client=saa7127[50],ok]
>msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler
>ivtv: i2c attach [client=MSP3448W-A2,ok]
>ivtv: i2c attach [client=unset,ok]
>ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-0018/ir0 [ivtv i2c driver
>#0]
>msp34xxg: daemon started
>tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8207478
>tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
>tveeprom: audio_processor = MSP3440 (type = 11)
>ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad2598,
>Revision 0xc56d9e80
>ivtv: NTSC tuner detected
>ivtv: Radio detected
>ivtv: requesting ivtv-fw-enc.bin from hotplug
>ivtv: firmware load failed
>ivtv: failed loading encoder firmware
>ivtv: Error loading firmware -3!
>ivtv: Error -3 initializing firmware.
>ivtv: Error -12 on initialization
>ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:00:0b.0 failed with error -12
>ivtv: ==================== END INIT IVTV ====================
>
>
>
>
>
--
Allan
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
