Ian Leonard wrote: > Hello, > > This is my first look at ivtv so I might be missing something obvious. > ivtv seems to be installed correctly, ivtv-detect gives me: > > driver: ivtv-0.4.1 (tagged release) > card: WinTV PVR 350, bus info 0000:02:0e.0, ivtv card #0 > hardware: saa7115 saa7127 msp34xx tda9887 tveeprom > /dev/video0: MPG encoding (links: /dev/video) > /dev/radio0: Radio (links: /dev/radio) > /dev/vbi0: VBI encoding (links: /dev/vbi) > /dev/vbi4: VBI from MPG > /dev/vbi8: VBI decoding > /dev/video16: MPG decoding > /dev/video24: PCM encoding > /dev/video32: YUV encoding > /dev/video48: YUV decoding > > I have a TV connected to the board via the SCART connector. > > I would like to play TV from the PVT350 and use the PC to change > channels. I have set passthorough (ivtvctl -K 1) and the TV shows a > blankscreen. The question is, what do I do next? I have tried ivtv-tune > in various combinations (e.g. ivtv-tune -teurope-west -cE1) but don't > get a picture. What am I doing wrong?
After all that, a reboot sorted the problem out. I guess lots of messing around had screwed something up. -- Ian Leonard Please ignore spelling and punctuation - I did. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
