On Jan 4, 2006, at 12:12 PM, John H. wrote: > well, i got svn .5.2 working now, and the problems went away, however, > I cannot change channels within myth unless i tell it to use ivtv-tune > -c. > you said tuner is not being detected in dmesg? i have pvr 150. how > do i set it, then? >
Did your dmesg change to include tveeprom info when you got 0.5.2 working? If not, then you still have problems. Keith C > > > On 1/4/06, Keith C <[EMAIL PROTECTED]> wrote: >> On Jan 4, 2006, at 12:28 AM, John H. wrote: >> >>> ok, i got latest firmware, and it seems sound works now, but i >>> cannot >>> change channels, and the picture is really fuzzy. >>> here's the dmesg >>> >>> ivtv: ==================== START INIT IVTV ==================== >>> ivtv: version 0.4.1 (tagged release) loading >>> ivtv: Linux version: 2.6.15 preempt K7 gcc-4.0 >>> ivtv: In case of problems please include the debug info between >>> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >>> ivtv: any module options, when mailing the ivtv-users mailinglist. >>> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) >>> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] >>> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) >>> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] >> >> Yeah, you're going to have some serious problems, as the tuner is not >> being set for your card. >> >>> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) >>> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] >>> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) >>> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] >>> tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) >>> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] >>> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>> ivtv0: Encoder revision: 0x02050032 >>> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers >>> (4096KB total) >>> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB >>> total) >>> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB >>> total) >>> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers >>> (2048KB total) >>> ivtv0: Create encoder radio stream >>> ivtv0: Initialized WinTV PVR 150, card #0 >>> ivtv: ==================== END INIT IVTV ==================== >> >> Also, I did not see any messages from tveeprom. This doesn't look >> good at all. What version of ivtv did you use before 0.4.1? Do you >> have any module options? It looks like your kernel might be using >> the versions of tuner and tveeprom that came with it instead of the >> ivtv versions (which works ok for me, but not everyone). You also >> want to verify that you are using the ivtv versions of tda9887 and >> msp3400. >> >> Keith C >> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
