On Saturday 07 January 2006 16:42, ShadowRage grooved on as follows: > Did you install all the firmware modules needed? > this is what my /usr/lib/hotplug/firmware/ looks like: > > -rw-r--r-- 1 root root 262144 2005-12-26 20:43 v4l-cx2341x-dec.fw > -r--r--r-- 1 root root 376836 2005-12-26 18:13 v4l-cx2341x-enc.fw > -rw-r--r-- 1 root root 155648 2005-12-27 01:15 > v4l-cx2341x-init-mpeg.bin > -r--r--r-- 1 root root 14264 2005-12-26 18:42 v4l-cx25840.fw > > I run ubuntu so our systems should be roughly identical.
It's nice to have it confirmed that this setup probably has the potential to work. My /usr/lib/hotplug/firmware looks identical to yours: -rw-r--r-- 1 root root 262144 2006-01-06 05:43 v4l-cx2341x-dec.fw -r--r--r-- 1 root root 376836 2006-01-06 05:40 v4l-cx2341x-enc.fw -rw-r--r-- 1 root root 155648 2006-01-06 05:44 v4l-cx2341x-init-mpeg.bin -r--r--r-- 1 root root 14264 2006-01-06 05:40 v4l-cx25840.fw Thanks for the suggestion. Any others remain welcome. -James > On Sat, 2006-01-07 at 09:17 -0700, James Nickerson wrote: > > Greetings ivtv folk, > > > > I've scanned every source I could find, but haven't found anything to > > help me overcome the issue I'm having wherein an attempt to insert the > > ivtv module on my system ends with: > > > > Jan 7 06:56:00 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw > > firmware (262144 bytes) > > Jan 7 06:56:00 localhost kernel: ivtv0 warning: Encoder mailbox not > > found Jan 7 06:56:00 localhost kernel: ivtv0 warning: Decoder mailbox > > not found Jan 7 06:56:00 localhost kernel: ivtv: probe of 0000:01:08.0 > > failed with error -12 > > > > And no /dev/video device is created. > > > > I'm running Kubuntu Linux on an AMD64 system with a WinFast NF4UK8AA > > motherboard and a 2.6.15 kernel built from vanilla kernel.org source. I > > started by referencing the howto at > > http://ivtvdriver.org/index.php/Firmware in order to install version > > 0.5.1, because I wanted to hotplug anyway. I noticed that 0.4.1, when I > > tried it, said in the readme that 0.5.2 is recommended for kernel 2.6.15, > > but I didn't see 0.5.2 anywhere, unless that's what the subversion source > > is at. > > > > lspci shows: > > > > 0000:01:08.0 Multimedia video controller: Internext Compression Inc > > iTVC16 (CX23416) MPEG-2 Encoder (rev 01) > > Subsystem: Hauppauge computer works Inc.: Unknown device 8003 > > Flags: bus master, medium devsel, latency 64, IRQ 22 > > Memory at f8000000 (32-bit, prefetchable) [size=64M] > > Capabilities: <available only to root> > > > > The full dmesg output on attempting to load the modules is: > > > > Jan 7 06:55:52 localhost kernel: ivtv: ==================== START INIT > > IVTV ==================== > > Jan 7 06:55:52 localhost kernel: ivtv: version 0.5.1 (tagged release) > > loading > > Jan 7 06:55:52 localhost kernel: ivtv: Linux version: 2.6.15cryogenic > > preempt gcc-3.4 > > Jan 7 06:55:52 localhost kernel: ivtv: In case of problems please > > include the debug info between > > Jan 7 06:55:52 localhost kernel: ivtv: the START INIT IVTV and END INIT > > IVTV lines, along with > > Jan 7 06:55:52 localhost kernel: ivtv: any module options, when mailing > > the ivtv-users mailinglist. > > Jan 7 06:55:52 localhost kernel: ivtv0: Autodetected WinTV PVR 150 card > > (cx23416 based) > > Jan 7 06:55:52 localhost kernel: ACPI: PCI Interrupt 0000:01:08.0[A] -> > > Link [APC1] -> GSI 16 (level, low) -> IRQ 22 > > Jan 7 06:55:52 localhost kernel: tuner 2-0061: chip found @ 0xc2 (ivtv > > i2c driver #0) > > Jan 7 06:55:52 localhost kernel: ivtv0: i2c attach to card #0 ok > > [client=(tuner unset), addr=61] > > Jan 7 06:55:52 localhost kernel: cx25840 2-0044: cx25841-23 found @ 0x88 > > (ivtv i2c driver #0) > > Jan 7 06:55:59 localhost kernel: cx25840 2-0044: loaded v4l-cx25840.fw > > firmware (14264 bytes) > > Jan 7 06:55:59 localhost kernel: ivtv0: i2c attach to card #0 ok > > [client=cx25840, addr=44] > > Jan 7 06:55:59 localhost kernel: wm8775 2-001b: chip found @ 0x36 (ivtv > > i2c driver #0) > > Jan 7 06:55:59 localhost kernel: ivtv0: i2c attach to card #0 ok > > [client=wm8775, addr=1b] > > Jan 7 06:55:59 localhost kernel: ivtv0: i2c attach to card #0 ok > > [client=tveeprom, addr=50] > > Jan 7 06:55:59 localhost kernel: tveeprom 2-0050: Hauppauge model 26032, > > rev C199, serial# 8095941 > > Jan 7 06:55:59 localhost kernel: tveeprom 2-0050: tuner model is TCL > > 2002N 5H (idx 99, type 50) > > Jan 7 06:55:59 localhost kernel: tveeprom 2-0050: TV standards NTSC(M) > > (eeprom 0x08) > > Jan 7 06:55:59 localhost kernel: tveeprom 2-0050: audio processor is > > CX25841 (idx 35) > > Jan 7 06:55:59 localhost kernel: tveeprom 2-0050: decoder processor is > > CX25841 (idx 28) > > Jan 7 06:55:59 localhost kernel: tveeprom 2-0050: has no radio, has IR > > remote > > Jan 7 06:56:00 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw > > firmware (262144 bytes) > > Jan 7 06:56:00 localhost kernel: ivtv0 warning: Encoder mailbox not > > found Jan 7 06:56:00 localhost kernel: ivtv0 warning: Decoder mailbox > > not found Jan 7 06:56:00 localhost kernel: ivtv: probe of 0000:01:08.0 > > failed with error -12 > > Jan 7 06:56:00 localhost kernel: ivtv: ==================== END INIT > > IVTV ==================== > > > > I've now tried ivtv 0.5.1 (with hotplug) and 0.4.1 (without), and both > > with the same result. I haven't tried to ressurect a windows box to > > verify that the hardware works, but it is new. > > > > Any help/advice/insights are, of course, appreciated. > > Thanks, > > James > > > > > > > > _______________________________________________ > > ivtv-users mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
