Hi I just got a pvr 150 and installed the latest drivers to get it working. I have picture on all channels but is missing sound from some channels. Some channels take 10 seconds before the sound works and sometimes it takes 2 minutes while for other it has never worked. This is consistent each time I change to the specific channel. Some stats:
7 channels total 3 with no sound 1 with 1-2 minutes delay 2 with 10-30 seconds delay 1 works first time I'm running the 0.4.1 driver with the firmware from the driver 24.23035, I have also tried the latest 35.23348 without any luck. I have been struggling with this for 2 days and have tried almost anything I can think of. Any hints would be very welcome. Dmesg output: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.1 (tagged release) loading ivtv: Linux version: 2.6.14-gentoo-r4 preempt gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 169 tveeprom: ivtv version tveeprom: Hauppauge: model = 26559, rev = B257, serial# = 8766462 tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 2-0044: ivtv driver cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: loaded /lib/modules/v4l-cx25840.fw firmware (12282 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] wm8775 2-001b: ivtv driver wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] ivtv0: Failed to load module tveeprom ivtv0: Failed to load module tuner ivtv0: Failed to load module cx25840 ivtv0: Failed to load module wm8775 ivtv0: Failed to load module tda9887 ivtv0: loaded /lib/modules/v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== lsmod: Module Size Used by ivtv 201684 2 videodev 9536 3 ivtv wm8775 5964 0 tda9887 15632 0 cx25840 23248 0 tuner 24160 0 tveeprom 14892 0 em8300 70896 1 bt865 5792 1 lp 10824 0 parport 36108 1 lp loop 13648 0 i2c_algo_bit 8520 2 ivtv,em8300 i2c_core 19928 7 wm8775,tda9887,cx25840,tuner,tveeprom,bt865,i2c_algo_bit e100 37056 0 I'm running an amd64 system and I'm using mplayer to play /dev/video. If you need any more information just ask. Thanks. -- Anders Rune Jensen http://www.cs.auc.dk/~arj/ PGP/GnuPG key: 1024D/62C2D7F0 @ pgp.mit.edu Fingerprint: 6A03 907E 92E1 47EB 4EAB 76B6 068A ACD1 62C2 D7F0
signature.asc
Description: This is a digitally signed message part
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
