On 1/11/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Hi,
>From the following pieces of startup-log it looks as if the only working
card uses a wm8775, the others use an msp34xx chip:
[17179635.424000] msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler
+radio mode=simpler
[17179635.424000] msp34xxg: daemon started
[17179635.432000 ] ivtv0: i2c attach to card #0 ok [client=MSP3448W-A2,
addr=40]
[17179638.448000] wm8775 1-001b: ivtv driver
[17179638.448000] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
[17179638.460000] ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
[17179639.800000] msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler
+radio mode=simpler
[17179639.800000] msp34xxg: daemon started
[17179639.808000] ivtv2: i2c attach to card #2 ok [client=MSP3448W-A2,
addr=40]
What version of the msp3400 module are you using? The one that came with
the kernel, or the one that came with the ivtv driver?
Stanley.
I should have been more clear in the subject "audio stopped working," rather than "no audio in stream". Audio has been working for these cards for months to years. I have always been using the ivtv msp3400. I have not made any kernel or driver changes to the system in over 6 months. The only variance that I can think of is that they were running alongside a PVR-150 for two days when the audio stopped.
W
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
