Hi! I have a PVR 350 card, I install ivtv 0.4.1, its look good. I will test it with cat /dev/video >test.mpeg command. Its working some second, hang up. The file size not 0, and can I play with mplayer, its look good. Why just few second? When a use mplayer /dev/video to ditto. Is good, but few second, after hang up, I need press ctrl-c. Mplayer not write any error. Why?
My hardware: AMD64 3000 K8N-E Delux Motherboard NVidia nForce3 250Gb chipset, 1GB Ram. My dmesg: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.1 (tagged release) loading ivtv: Linux version: 2.6.11.4-21.7-default gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: ivtv i2c driver #0 passed test. ivtv0: i2c attach to card #0 ok [client=unset, addr=18] ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-2/2-0018/ir0 [ivtv i2c driver #0] tveeprom: ivtv version tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 8234726 tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = MSP4418 (type = 19) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 2-0021: ivtv driver saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] saa7127 2-0044: ivtv driver saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] msp3400 2-0040: ivtv driver msp3400 2-0040: chip=MSP4418G-B3 +nicam +simple +simpler +radio mode=simpler ivtv0: i2c attach to card #0 ok [client=MSP4418G-B3, addr=40] tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] msp3400 2-0040: msp34xxg daemon started ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) ivtv0: loaded v4l-cx2341x-init-mpeg.bin firmware (155648 bytes) tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ==================== lspci: 0000:00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) 0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev a2) 0000:00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) 0000:00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 0000:00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 0000:00:02.2 USB Controller: nVidia Corporation CK8S USB Controller (rev a2) 0000:00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1) 0000:00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) 0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) 0000:00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AQ [Radeon 9600] 0000:01:00.1 Display controller: ATI Technologies Inc RV350 AQ [Radeon 9600] (Secondary) 0000:02:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Gábor. Thanks any answer. ________________________________________________________________________ Nézze meg az Üvegtigrist INGYEN! T-Online Téka kódolatlan hétvége január 13-15. www.t-online.hu _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
